Download TIL111, TIL114, TIL116, TIL117

TIL111, TIL114, TIL116, TIL117
OPTICALLY COUPLED ISOLATOR
Circuit
Features
Isolation 2500 V (TIL111: 1500V)
High DC Current Transfer Ratio
Low Cost Dual-In-Line Package
Description
The TIL111, TIL114, TIL116, TIL117 are each an optically coupled isolator consisting of a
Gallium Arsenide infrared emitting diode and an NPN silicon phototransistor mounted in a
standard 6-pin dual-in-line package. Surface Mount Option Available.
All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a
cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C)
Storage Temperature:
-55°C to +150°C
Operating Temperature:
-55°C to +100°C
Lead Soldering:
260°C for 10s, 1.6mm from case
Input-to-Output Isolation Voltage: ±2500V (TIL111: ±1500V) (note 1)
Input Diode
Forward DC Current:
Reverse DC Voltage:
Peak Forward Current (tp=10µs):
Power Dissipation:
Derate Linearly:
60mA
3V
3A
100mW
1.33mW/°C above 25°C
Output Transistor
Collector-Emitter Voltage:
Emitter-Collector Voltage:
Collector-Base Voltage:
Power Dissipation:
Derate Linearly:
30V
7V
70V
150mW
2.00mW/°C above 25°C
Package
Total Power Dissipation:
Derate Linearly:
250mW
3.3mW/°C above 25°C
Electro-optical Characteristics (Ta=25°C)
INPUT
VF
PARAMETER
Forward Current
CONDITIONS
IF=16mA
VALUE
1.4 V
Max
IR
Reverse Current
VR=3V
10 µA
Max
VR
Reverse Breakdown Voltage
IR=10µA
3V
Min
OUTPUT
BVCEO
Collector-Emitter Voltage
IC=1mA
30 V
Min
BVECO
Emitter-Collector Voltage
IE=0.1mA
7V
Min
BVCBO
Collector-Base Voltage
IC=0.1mA
70 V
Min
ICEO
Collector-Emitter Dark Current
VCE=10V, IB=0
50 nA
Max
ICBO
Collector-Base Dark Current
VCB=10V, IE=0
20 nA
Max
CCE
Collector-Emitter Capacitance
VCE=0
10 pF
Typ
IC=0.1mA, VCE=5.0V
100
150
Min
Typ
HFE
COUPLED
PARAMETER
DC Current Transfer Ratio
IC/IF
TIL111
CONDITIONS
IF=16mA, VCE=0.4V
TIL114, 116, 117
MIN
UNIT
12.5 % Min
50 %
Min
VCE(SAT)
Collector-Emitter Saturation
Voltage
IF=16mA, IC=2mA
0.4 V
Max
CIO
Capacitance Input to Output
f=1MHz, note 1
0.6 pF
Typ
tR
Output Rise Time
tF
Output Fall Time
VCC=10V, IC=2mA,
RL=100ohm
2 µs
Typ
Typ
Input-Output Isolation Voltage
RISO
TIL111
TIL114, 116, 117
Note 1
±1500
V
Min
±2500
V
Min
Notes
1. Measured with input leads shorted together and output leads shorted together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any
error on its website. Visit File Lists to confirm old printouts are up-to-date.
TIL111
Package Outlines
Standard Package
Standard Package; Surface Mount Lead Bend (Option S)
Standard Package; 10 mm Lead Bend (OptionW)
Top of Page
Electrical Schematic
Top of Page
Agency Approval Information
The following agency approvals have been obtained for this part:
CSA
BSI
Demko
Fimko
Nemko
Semko
UL
VDE 0884
Canadian Standards Association
British Standards Institute
Danish Safety Agency
Finnish Safety Agency
Norwegian Safety Agency
Swedish Safety Agency
Underwriters Laboratory
Option 300
Top of Page
Ordering Options
The following options can be ordered with this part:
Option
300
3S
Order Entry
Identifier
.300
VDE 0884
.3S
Description
Option S (see below); VDE 0884
3SD
.3SD
Option S (see below); VDE 0884; Tape and Reel
R2
.R2
Opto Plus 2 Reliability Conditioning
S
.S
Surface-Mount Lead Bend
SD
.SD
Option S; Tape and Reel
W
.W
10 mm Lead Bend
Top of Page
Tape and Reel Packaging
Standard Package - Option SD