Download TS-9507DT_Specification

DVI Signal Optical Transmission Transmitter
TS-9507DT
Description
TS-9507DR is an extender support for high-resolution DVI video signal transmission by
single or multimode fiber transmission. It will transfer DVI video signals into optical fiber signal
transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 ×
1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can
be used with single core fiber transmission fiber optic transmitter or matrix output card;
Features
■ Support for single-mode fiber transmission of high resolution multi-DVI signal;
■ Support the transmission of Audio signals, IR signal and RS-232signals;
■ Support site refresh EDID
■ Single-mode fiber:2-20km, 1920x1080p @ 60Hz.
■ OM3multimode fiber: Less than 500 meters, 1920x1080p @ 60Hz
Specifications
Model
TS-9507DT
DVI Video
Interface
DVI-D interface
Support protocol
DVI1.0，EDID1.4
Pixel bandwidth
225MHz, full digital
Interface Bandwidth
3.25Gbps, full digital
Max Supported resolution
HDPC: 1920x1200P@ 60_24bit
HDTV: 1920x1080P@60_36bit
Signal Type
DVI 1.0 / T.M.D.S. full digital signal
Signal Strength
T.M.D.S. +/- 0.4Vpp
Min/Max Level
T.M.D.S. 2.9V/3.3V
Impedance
50Ω
Audio Signal
Audio Input
1 channel simulation stereo input, 3.5MM The
headset seat
Frequency Response
20Hz - 20KHz ±0.05db
Input Level
2Vrms(MAX)
Serial port control
Serial port control interface
3bit 3.8 interface
Signal Type
Digital
Level Type
RS-232 level
Signal direction
Bidirectional communication
Baud Rate
Min: 4800bps Max: 115200bps
Data bits
8
Stop bit
1
Correction bit
None
Flow Control
None
Level delay
500 ns
Peak level
+/- 15V
DVI Monitor output port
Interface
DVI-D interface
Supported protocols
DVI1.0,
Pixel bandwidth
225MHz , full digital
Interface Bandwidth
3.25Gbps, full digital
Max Supported resolution
HDPC: 1900x1200@60Hz
EDID1.4
HDTV: 1920x1080P@60Hz
Signal Type
DVI 1.0/ T.M.D.S. full digital signal
Signal Strength
T.M.D.S. +/- 0.4Vpp
Min/Max Level
T.M.D.S. 2.9V/3.3V
Impedance
50Ω
Optical output section
Optical output port
LC connector
Fiber Type
Multimode / Single Mode (optional)
Wavelength
Multimode 850nm / Single Mode: 1310-1620nm
(optional)
Multimode fiber standard
50 / 125μm
Single-mode fiber standard
9 / 125μm
Interface bandwidth
Forward: 10.2Gbps, the reverse: 3.125Gbps
Bit clock jitter
<0.15 Tbit
Bit rise time
<0.3Tbit (20% - 80%)
Bit fall time
<0.3Tbit (20% - 80%)
Maximum recommended distance
OM3 multimode fiber output: less than 500 m, while in
1920x1080p @ 60Hz
Single-mode fiber: 2-20 km, while in 1920x1080p @
60Hz
Specification
Power supply
Power adapter, 12VDC / 2A
Maximum power consumption
5W
Temperature
Storage& operation temperature: -20 ℃ ~ + 70 ° C
Humidity
Storage& operation humidity: 10% ~ 90%
Dimensions
162 (L) X 195 (W) X 35 (H)