Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
TDJD LED 2x4 DATE JOB NAME TYPE Applications Applications Features • Two outer and one center inverted frosted acrylic lenses • 3-1/2’’ Deep Housing • Clean appearance, no exposed fasteners • DLC Listed Series Size TDJD LED LED System Color Temp Voltage Voltage Mounting • Office Areas • Class Rooms • Retail Stores • Hospitals Options 2x4 LTG1- Standard LTG2- Low LTG3- High C- Custom Package (Consult Factory) 3000K 3500K 4000K 5000K 120 277 UNV Ordering Example: TDJD LED-2X4-LTG2-4000K-UNV-SG-DB T–Lay-in for Grid Ceiling* F–Flange Kit for Sheetrock SG - Slot Grid EM-EM Pack* DB- Dimming AR- Air Return SC-Separate Circuit WH- Whips *Standard Tee is 9/16’’. Must specify if 15/16’’ * Voltage must be specified with EM option LED System Information Options: PACKAGE LTG1 (STANDARD) LTG2 (LOW) LTG3 (HIGH) SYSTEM WATTS DELIVERED LUMENS 58W 6700Lm 53W 64W 6115Lm Color Temperature Pro-rate: 7610Lm CCT OUTPUT 3000K 95% 3500K 97% 4000K 100% 5000K 103% ***FOR ANY CUSTOM LED PACKAGE REQUESTS CONSULT FACTORY Details Application Features: Premium grade, recessed, high performance direct/ indirect architectural luminaire with two outer and one center frosted acrylic lenses. For use in indoor applications where a LED luminaire with soft, low-glare illumination and modern styling is required. Construction: Die formed and spot welded, 20 ga. cold rolled steel housing with precision formed, cold rolled steel arched reflector and die formed, cold rolled steel perforated lamp shield. Shielding flexes over mounting studs on housing for easy installation and re-lamping. Sufficient knock-outs provided on back of housing for flexible conduit attachment. August 2014 Electrical: Integral Driver Approvals: DLC Listed. Union made, ETL listed and manufactured in the US. Mounting: Recessed mounting for T-Bar, Slot Grid or with Flange Kit for sheetrock ceiling installations. Optics:Two outer and one inverted center frosted acrylic lenses Options: Emergency Backup, Separate Circuit, Air Return Slots, 6’ Whips. Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com TDJD LED 2x4 DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE. ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC. TDJD LED 2x4 Dimensions: SLOT GRID TEE GRID CROSS SECTION VIEW AIR FLOW SLOT GRID TEE GRID CROSS SECTION VIEW WITH AIR RETURN Lens Installation Instructions: STEP 1 Detail 1-1: SQUEEZE LENS TO SNAP AROUND EXTRUDED GROOVE SEE DETAIL 1-1 STEP 2 August 2014 STEP 3 Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com TDJD LED 2x4 DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE. ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.