Download question bank - Shree HN Shukla Group Of College

Shree H. N. Shukla College of Diploma Engineering
Nr. Lalpari Lake, B/h Marketing Yard, Rajkot-360 003
Phone: 0281-29250025, 9727753360
QUESTION BANK
Subject Name: Engineering Drawing Branch: ELECTRICAL.
Q-1 Draw ellipse of major axis 100mm and minor axis 70mm
with normal and tangent by arc of circle method.
Q-2 By arc of circle method draw ellipse of major axis-90mm
and minor axis 60mm with normal and tangent.
Q-3 By concentric circle method draw ellipse of major axis100mm and minor axis 50mm with normal and tangent.
Q-4 By concentric circle method draw ellipse of major
120mm and minor axis 70mm with normal & tangent.
Q-5 Draw ellipse of major axis 180mm & minor axis 75mm
by oblong method with normal and tangent.
Q-6 Draw ellipse of major axis 120mm & minor axis 60mm
by oblong method with normal & tangent.
Q-7 Draw Cycloid of 40 mm with normal & Tangent.
Q-8 Draw ellipse of major axis 120mm & minor axis 70mm at
an angle of 60degree.
Q-9 Draw ellipse by directrix focus method whose distance
fron directrix is 100mm with eccentricity e=2/3 with normal
& tangent.
Q-10 Base AB-53mm & OV-45 mm perpendicular to AB.
Draw parabola.
Q-11Base AB-62mm at angle 30 degree where OV-45mm
perpendicular to AB. Draw parabola.
Q-12 DD1-F=100mm ,e=1.Draw the curve with normal &
tangent.
Q-13 DD1-F= 100mm, e=3/2. Draw the curve with normal
and tangent.
Q-14 x-coordinate= 25mm , y-coordinate=50mm. Draw
hyperbola by rectangle method.
Q-15 x-coordinate= 25mm y coordinate= 50mm at 60degree.
Draw hyperbola by oblique method.
Q-16 Construct a regular pentagon having side of 30 mm
with universal method.
Q-17 Draw an Involute of 30 mm side pentagon
Q-18 A thin rectangular plate of 60 x 30 mm rests with
smaller side on HP such that
Q-19 Plan (Top View) looks square. A side which is on HP
makes 30o with VP. Draw the
projection
Q-20 With help of neat sketches differentiate between
“Aligned system” and
“Unidirectional system”.
Q-21 Construct Cycloid for 50 mm diameter circle.
Q-22 Construct regular hexagon with T Square & Set square
(Or Mini Drafter) such
that opposing sides are 80 mm far from each other.
Q-23 Divide 80 mm long line in to seven equal parts.
Q-24 Illustrate different types of lines and their uses in
engineering drawing
Q-25 Draw the “Title block” with using proper dimension
Q-26 Draw a projection of following points for line XY.
(i) point A is on the VP and 30 mm below HP.
(ii) point B is on the HP and 20 mm infront of VP.
(iii) point C is20mm above HP and 20 mm behind VP.
(iv) point D is on HP and VP both the plane.
Q-27 A regular pentagon of 30 mm side is resting on HP on
one of its side which is
Q-28 inclined at 30° with VP and the plane is inclined at 45°
with HP. Draw theprojection of plane.
Q-29 The end P of a line PQ 80 mm long is on HP and VP.
The line PQ is inclined at
30° to HP and 45° to VP. Draw the projection of line PQ
and find apparent
angles. Assume end Q in first quadrant
Q-30
A pictorial view of an object is shown in fig no.-(1). Draw to
full size of its
following view using First angle projection method.
Elevation looking from direction “X”.
(b) Right hand side view.
(c) Top view.
Q-31.A Pictorial view of an object is shown in fig. 1 Draw its
following views using 1st
Angle Projection Method.
(1) Elevation from X Direction (2) Plan (3) Right hand side view
Q-32Fig 2 shows two views of an object. Draw its isometric
views.
FIG 2.
Q-33
FIG 3
Q-34 Draw epicycloid where r=15 mm and
R=45 mm with normal and tangent.
Q-35 Draw Archimedean spiral for one
convolution with maximum & minimum
radius 70 mm & 20 mm resp. with normal
&tangent. With 300 degree.
Q-36 Draw involute of circle with radius 35
mm with normal and tangent.