Download SOL-OM-035-18 Eastman Omnia starting point formulation

Neutral-pH glass RTU
This starting point formulation was tested for efficacy in removing water spots
and greasy soil from glass.
Ingredient
Omnia
Wt%
2.0
a
Multitrope™ 1620 (70%)b
1.4
Multitrope 810 (40%)
2.5
™
c
Isopropanold
1.0
Preservative/colorant/fragrance
q.s.
Water
93.1
b
Omnia, CAS 53605-94-0, Eastman Chemical Company*
Alkyl polysaccharide, CAS 68515-73c
Deconic acid potassium salt/octanoic acid potassium salt, CAS 13040-18-1/764-71-6,
1, Croda*
d
Isopropanol, CAS 67-63-0, Sigma-Aldrich*
Croda*
*Listed as full green circle on EPA Safer Choice Safer Chemical Ingredients List and meets Safer
Choice Criteria for Chemical Ingredients.
a
Product pH: 7–8
Product clarity: Clear
Thermally stable (1 week @ 50˚C): Yes
Total actives
Wt%
Omnia
2.0
Multitrope 1620
1.0
Multitrope 810
1.0
Isopropanol
1.0
Procedure
• Mix ingredients in the order listed.
• Use low-speed rolling or low-shear mixing at room temperature.
NOTE: Omnia is an LVP-VOC, which means it is not included in the calculation of VOC of the cleaner in
the U.S. This product outperformed two commercial competitors in both soil removal and nonstreaking
ability. Performance evaluation was performed at the listed use level. The formulation has low odor
and a light yellow color. Addition of a preservative, colorant, and/or fragrance should be done at the
discretion of the formulator.
© 2016 Eastman Chemical Company. Eastman brands referenced herein are trademarks of Eastman Chemical Company or one of its subsidiaries. The ® used on Eastman brands denotes registered
trademark status in the U.S.; marks may also be registered internationally. Non-Eastman brands referenced herein are trademarks of their respective owners. SOL-OM-035-18 11/16