Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
www.eurojauge.fr Signal isolation/signal amplification TV 22 GL TV 200 GS Description The TV 22 GL isolating amplifier is used for the galvanic isolation and amplification of DC current signals (mA). Input and output are galvanically isolated with a high level of isolation. The integrated electronic high efficiency power supply unit prevents overheating and allows for high output loads. The extremely narrow design allows for space saving installation. STV 22 GL Description The TV 200 GS isolating amplifier is used for galvanic isolation, conversion and amplification of standard output signals (V/mA). Input and output are galvanically isolated with a high level of isolation. The integrated high efficiency electronic power supply unit prevents overheating and allows for high output loads. Offset and gain can be adjusted by two potentiometers on the unit front. Description The STV 22 GL isolating amplifier with supply is used for the galvanic isolation and amplification of DC current signals (mA). The connected transducer is directly supplied via a galvanically isolated and limited supply voltage. Input and output are galvanically isolated with a high level of isolation. The integrated high efficiency electronic power supply unit prevents overheating and allows for high output loads. Technical specifications Technical specifications Housing Standard DIN-rail housing W x H x D: 23 x 78 x 103 mm Housing Standard DIN-rail housing W x H x D: 18 x 78 x 103 mm Supply voltage DC 20 – 30 V or AC 230 V Supply voltage AC/DC 20 – 253 V Input 0 – 20 mA or 4 – 20 mA Sensor supply DC 27 V open circuit voltage DC 21 V at 20 mA Technical specifications Housing Standard DIN-rail housing W x H x D: 18 x 78 x 103 mm Supply voltage AC/DC 20 – 253 V Input 0 – 20 mA or 4 – 20 mA Output 0 – 20 mA or 4 – 20 mA 1:1 proportional to input signal Output 0 –10 V or 4 – 20 mA Output load Max. 400 Ohm Output load I max. 900 Ohm/U min. 500 Ohm DG: H TV 22 GL TW 41 GM Part no. 53701 53702 (isolator without power supply) TWH 41 GM (HART-enabled) DG: H TV 200 GS 53704 Input 4/20 mA Output 0/10 V TV 200 GS 53703 Part no. Input 0/10 V Output 4/20 mA other signals Input 0 – 20 mA or 4 – 20 mA Output 0 – 20 mA or 4 – 20 mA 1:1 proportional to input signal Output load Max. 800 Ohm DG: H 53705 Part no. STV 22 GL 53706 STH 22 GL 53707 (HART-enabled)) AFRISO-EUROJAUGE · 17 a rue des Cerisiers · 67117 Furdenheim · Tél. 03.88.30.31.38 · Fax 03.88.30.26.90 · [email protected]