Download SP-240 series - Mouser Electronics

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
SP-240
240W Single Output with PFC Function
series
■ Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC Fan
Built-in fan ON / OFF control
LED indicator for power on
Fixed switching frequency at 90KHz
3 years warranty
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
SPECIFICATION
MODEL
OUTPUT
www. tuv.com
ID 2000000000
SP-240-5
SP-240-7.5
SP-240-12
SP-240-15
SP-240-24
SP-240-30
SP-240-48
DC VOLTAGE
5V
7.5V
12V
15V
24V
30V
48V
RATED CURRENT
45A
32A
20A
16A
10A
8A
5A
CURRENT RANGE
0 ~ 45A
0 ~ 32A
0 ~ 20A
0 ~ 16A
0 ~ 10A
0 ~ 8A
0 ~ 5A
RATED POWER
225W
240W
240W
240W
240W
240W
240W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
6 ~ 9V
±2.0%
10 ~ 14V
±1.0%
12 ~ 18V
±1.0%
20 ~ 28V
±1.0%
27 ~ 33V
±1.0%
41 ~ 56V
±1.0%
4 ~ 6V
VOLTAGE TOLERANCE Note.3 ±2.0%
LINE REGULATION
±0.5%
±0.5%
±0.3%
±0.3%
±0.2%
±0.2%
±0.2%
LOAD REGULATION
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
800ms, 50ms/230VAC
HOLD UP TIME (Typ.)
20ms/230VAC
87%
88%
89%
34.7 ~ 41V
57.6 ~ 67.2V
Note.5 88 ~ 264VAC
VOLTAGE RANGE
FREQUENCY RANGE
47 ~ 63Hz
INPUT
PROTECTION
1500ms, 50ms/115VAC at full load
20ms/115VAC at full load
124 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
79%
83%
INRUSH CURRENT (Typ.)
3.6A/115VAC
25A/115VAC
1.8A/230VAC
40A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
29.5 ~ 35V
14.7 ~ 17.5V
19 ~ 22.5V
9.4 ~ 10.9V
6.3 ~ 7.5V
OVER VOLTAGE
OVER TEMPERATURE
FUNCTION FAN CONTROL
WORKING TEMP.
PF>0.98/115VAC at full load
86%
86%
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
RTH2≧40℃ FAN ON, ≦35℃ FAN OFF(Typ.)
-20 ~ +70℃ (Refer to output load derating curve)
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY &
EMC
(Note 4)
OTHERS
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
MTBF
284K hrs min.
DIMENSION
190*93*50mm (L*W*H)
0.8Kg; 18pcs/15.4Kg/1.04CUFT
PACKING
NOTE
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
MIL-HDBK-217F (25℃)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-240-SPEC 2015-07-14
USSPP--23242005
240W Single Output with PFC Function
Mechanical Specification
Unit:mm
12.5
25
Case No.987A
ssee rr ii eess
4-M4 L=6
150
20.25
159.5
139.5
133
49.5
20
7
6
60.5
41.5
43.5
8
2
44
84.5
9.5
4
3
93
4-SO M3 L=4
5
1
190
Air flow
direction
150
12.5
20.25
25
4-M4 L=6
Terminal Pin No. Assignment
Pin No.
1
2
3
50
14max.
Assignment
AC/L
AC/N
FG
Pin No.
4,5
6,7
Block Diagram
fosc : 90KHz
FAN
ON/OFF
CONTROL
EMI FILTER
&
RECTIFIERS
I/P
PFC
CIRCUIT
FG
O.L.P.
O.V.P.
Static Characteristics
100
80
50
LOAD (%)
LOAD (%)
60
40
20
0
+V
-V
DETECTION
CIRCUIT
PWM & PFC
CONTROL
Derating Curve
FAN
RECTIFIERS
&
FILTER
POWER
SWITCHING
O.T.P.
-20
Assignment
DC OUTPUT -V
DC OUTPUT +V
10
20
30
40
50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
100
300
90
250
80
200
70
150
60
100
50
50
40
25
88
90
95
100
115
135
155
175
195
230
264
INPUT VOLTAGE (VAC) 60Hz
File Name:SP-240-SPEC 2015-07-14
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Mean Well:
SP-240-5 SP-240-24 SP-240-48 SP-240-7.5 SP-240-30 SP-240-15 SP-240-12
Related documents