Download Priyabrata Mohapatra Permanent Address Priyabrata Mohapatra At

Priyabrata Mohapatra
Permanent Address
Priyabrata Mohapatra
At. Kandanda, PO. Antara, Via. Adda
Dist. Balasore, Odisha - 756134
Phone
Number:
+91-8327723978,
7064759127
E-mail Address: [email protected]
OBJECTIVE
 To carry out research on modelling the manufacturing system through Process Planning
and SchedulingControl System using AIS based support system.
 To apply the research to solve the Industrial problems.
AREA OF RESEARCH

Manufacturing System

Process Planning and Scheduling

Industrial Engineering

Robotic and Automation

Project Management

Optimization Methods

Supply Chain Management

Operations Research
ACADEMIC QUALIFICATION
 Ph.D in Industrial Engineering, Department of Industrial Engineering and
Management, IIT Kharagpur, 2013, India.

M. Tech in Production Engineering, Department of Mechanical Engineering,
National Institute of Technology, Rourkela. 2006 to 2008; CGPA 8.56/10

B. Tech in Manufacturing Science and Engineering, University College of
Engineering, Burla, Orissa, 2001 to 2005; 67.8 %

12th, Council of Higher Secondary Education Orissa, 1999, 60%

10th, Board of Secondary Education Orissa, 1996, 73.33%
Work Experiences
Sl. No Position held
Name of the
institute
From
To
Nature of Job
1
Lecturer in the Dept. GITA
01/07/2008
of Mechanical Eng
Bhubaneswar
30/12/2008
Teaching
2
Assistant Professor KIIT
in the School of University
Mechanical
25/05/2017
Teaching
01/08/2013
Engineering
1. Hostel Superintendent, KIIT Boys Hostel(KP1)
2. Faculty In charge, Library of School of Mechanical Engineering at KIIT University
Bhubaneswar
3. Central DC member in KIIT University
Editorial Board Member

Scientific and Technical Committee & Editorial Review Board on Industrial
and Manufacturing Engineering.
REVIEWER OF INTERNATIONAL JOURNALS
 IEEE Transactions on Systems, Man and Cybernetics (Part: A)
 International Journal of Production Research(IJPR)
 Computers and Industrial Engineering (CIE)
 International Journal of System Science (IJSS)
 Journal of Intelligent Manufacturing (JIM)
 International Journal of Production and Economics (IJPE)
AWARDS
1. Excellence in reviewing award to recognition of an outstanding contribution
to the quality of Computers and Industrial Engineering(CIE) for 2013
2. Best paper presentation in AETM-2015 Conference, Bangkok, Thailand.
2015
3. COSMIC- Outstanding Researcher Award for the contribution in the field
of Mechanical Engineering and Technology at AETM-2017, Bangkok 2017
PUBLICATION
Journals:

P. Mohapatra,LyesBenyoucef and M.K. Tiwari, Realizing Process planning and
scheduling Integration through adaptive setup planning, International Journal of
Production Research, 2013. Vol. 51, Issue 8, pp2301-2323 (Citations 12).

P. Mohapatra, LyesBenyoucef and M.K.Tiwari, Integration of Process Planning and
Scheduling through Adaptive Setup Planning: A Multi-objective Approach
International Journal of Production Research, 2013, vol51, pp7190-7208 (Citations
6).

P. Mohapatra, AshutoshNayak and M. K. Tiwari, Multi-objective approach in
intregration of process planning and scheduling using Controlled Elitist Nondominated Sorting Genetic Algorithm. InternationalJournal of Production Research
2015, Vol. 53, Issue.6, Page-1712-1735(Citations 10)

P. Mohapatra, Nitesh Kumar, Andrew Matta andM. K. Tiwari, A nested partitioning
based approach to integrate process planning and scheduling in flexible
manufacturing A nested partitioning based approach to integrate process planning and
scheduling in flexible manufacturing, International Journal of Computer Integrated
Manufacturing 2015, Vol.28, Issue-10, page-1077-1091. (Citations 2).

P. Mohapatra, Arijit Bhattacharya, Vikas Kumar, Prasanta Kumar Dey, Malcolm
Brady and Manoj Kumar Tiwari, Green Supply Chain Performance measurement
using fuzzy-ANP based balanced scorecard: a collaborative decision making
approach. Production Planning and Control , 2014.Vol. 25(8), page-698714.(Citations 78).

P. Mohapatra , K. R. Zutung, Y. Daultani and M. K. Tiwari, A synchronized strategy
to minimize vehicle dispatching time: a real example of steel industry. Advance in
Manufacturing, 2014, 2(4), 333-343.

S. Sahu, B. B. Biswal and P. Mohapatra, “Quaternion: An Alternate Approach to
Robot Kinematics”Journal of Mechanical Engineering, pp7,ICFAI Press,2008.
Conferences:

P. Mohapatra, Sourabh Nanda, Nihar Ranjan Sahoo and Debasis Sahoo,
Development of sustainable manufacturing process: A fuzzy- AHP Approach,
AETM-2017, Bangkok.

P. Mohapatra, N. R. Sahoo and S. Nanda, Adoptability of sustainable energy
technology in Rural India. Green Asia and Sustainability Forum Conference-2016,
Bangkok.

P. Mohapatra, S. Nanda, T. Adhikari and S. Tripathy, Application of Fuzzy-ANP
model for measuring the performance of Supply Chain. AETM-2015, Bangkok.

P. Mohapatra, S. Nanda and S. Mallick, Integration of Process planning and
Scheduling: A DNA approach. ISCO-2015, Coimbatore.

P. Mohapatra, S. Nanda and T. Adhikari, Resilience Measurement of a Global Supply
Chain Network, ISCO-2015, Coimbatore

V K Manupati, J J Thakkar, Priyabrata Mohapatra, Akhilesh Kumar and M K
Tiwari,Process plan and scheduling integration for near optimal process plans in
networked based manufacturing using controlled elitist NSGA-II and territory
defining algorithms(SEMCCO2012).

P. Mohapatra, M. Vijay Kumar and M.K. Tiwari, “Integration of Process
Planning and scheduling through an Artificial Immune System(AIS) based
adaptive setup planning” (ABV-IIITM, Gwalior, 2011).

P. Mohapatra, GeetLahoti, R. P. Mohanty and M. K. Tiwari, “A Quadratic
Programming Problem for a Dual Market Facility Network Design” International
Conference on Best Practices in Supply Chain Management (BPSCM-2012, SOA
University, Bhubaneswar)

P. Mohapatra S. Sahuand B. B. Biswal, “Kinematic synthesis of revolute robots
for optimization of workspace : A comparative study”.(IEEE CICCRA-2008,
NIT Rourkela).
Book Chapter:

P. Mohapatra, A. Kumar, LyesBenyoucef, W. K. Yew and M. K. Tiwari, “Route
selection and consolidation in International Intermodal freight transportation”
in Application of Multi-Criteria and Game Theory Approach (Springer)
Communicated to the Journals:

P Mohapatra, A Nayak, S Gupta, LyesBenyoucef and M K Tiwari, DNA Based
Adaptive Setup Planning toward Integration of Process Planning and Scheduling
submitted inRobotics and Computer Integrated Manufacturing

P. Mohapatra, N. Kumara and M. K. Tiwari, Developing the performance index of
integration of process planning and scheduling through setup planning in a
reconfigurable environment.submitted to International Journal of Production
Research

AshutoshNayak, P. Mohapatra and M. K. Tiwari, Quantify Servicing Reliability
for Field Failures in ‘Not the First Time Right’ cases, submitted to IEEE
Transactions on Automation Science and Engineering. (2013)

Bharat Malhotra, P. Mohapatra and M. K. Tiwari, Solving vehicle routing problem
with stochastic demands using algorithm protofolio, submitted to International of
Production Research,(2015).

SusvonMullick, SusvonMaji, Ujjal Das and P. Mohapatra, The analysis integration
performance of TQM tool and Technique in a manufacturing industry, submitted to
Journal of cost and Parametrics,(2014)
COURSES UNDER TAKEN
Supply Chain Management, Project Engineering and Management, Operations
Research-I, II and III, Product Design and Process Planning, Intelligent Manufacturing,
Decision Modelling, Work System Design, Quality Design and Control, Probabilistic
and Statistics.
INDUSTRY EXPERIENCE
 Intern at NALCO, Damonjodi, Orissa, [May – June, 2003].
 Intern at HAL, Sunabeda, Orissa [May – June, 2004].
ACHADEMIC TRAINING
 Taken a Four days short-term course on Reconfigurable Manufacturing System
held at IIT Kharagpur, India.(Feb2010)
 Taken a Four days short-term course on Lean Manufacturing System held at IIT
Kharagpur, India (Dec 2010)
 One month research work on Supply Chain Management at Dublin City
University(DCU), Business School, Ireland. (Aug 2012 – Sep 2012)
STRENGTHS
 Good at imagination, analytical application and creativity.
 I am a avid Programmer and ebullient about coding of Evolutionary Algorithm
 Able to depict several real life situations in terms of programming and simulation.
 Fluent at English and communicating with people in general.
 Quick at learning and adapting to working environment.
DECLARATION
I hereby declare that the above information is true to the best of my knowledge.
Date: 27/05/2017
(Priyabrata Mohapatra)