Download SMS - GPS Lokátor

SMS - GPS Locator
-1-
-2-
www.abiks.sk
r. 2011
For who is it.
We created this locator for peaple, that knows where it place for looking for position via simple SMS from mobile phone. We
suppose that this will in most personal car or truck, construction equipment etc.
Especially we take respect the fact that the device was also very easy to mount and operating.
Addition simply finding position we wanted to more features, and the possibility to park your car and give information, if the car
changes the location, roaming and battery charging control.
Function parking is designed to prevent false reports and we create an algorithm to prevent this.
Roaming function is to enable the client to get information each time changes the operator. This may not be the only crossing
borders and between states, although it will be soon. This feature can be turned off if necessary.
After initializing the device that controls the charge battery from a source other than their own batteries, eg. car battery. In case of a
interrupt charging or when the battery is no longer sufficient, so to send SMS on this state. Function can be disabled if the variable
charging source, such as. cigarette-lighter socket in your car.
In case of disconnection or loss of GPS signal, for example. in a tunnel or underground car park gets the customer information in
the form of "Last know position“, and if it is loaded on the right format, so the report is in the shape of" Actual position ".
If the GPS signal is disturbed, so is possible cooperate with GSM operator and get of trace the car so that there is command +monitor:
that give a more detailed information of where the device is connected.
-3-
Basic features:
















Automatically detects the type of GSM network (EGSM 850/900/1800/1900 MHz)
Operating temperature –20°C - +55°C
Power internal battery 3.4-4.2V (Li-Ion rechargeable)
External battery power from a DC source 10-30V
After initializing the device reads the date, time and creates a record in your SIM card holder of the registration equipment.
After receiving an SMS reply according to shape questions about the location of equipment or its condition
Allows you to monitor parking in the circle of 30m
Allows you to watch roaming in the case of a change of operator attention to this change
If you already a park or roaming turned on, the new number can refuse and give message about it
Monitor battery charging and status, in case of loss of battery charge or and discharge can send message about it
The location information can be in form to Google and Bing Maps.
Addition the position will know about vehicle speed and altitude.
If it is not loaded current location, it shall notify the last known position and the UTC date when the value loaded
Allows you to print detailed information about the GSM network operator for the case, if the GPS signal is disturbed or unavailable
SMS command which is not known for equipment is ignored and canceled, and therefore does not respond to commercial or
promotional offers operator
The device is based on module Telit GM862-GPS
Installation device.
 The device does not come with SIM card and therefore this must be purchased separately. We choose such a SIM card, which is
easy to restore functionality. It is not appropriate when the card receive the ads and offers, even if the device in this situation
resolved.
-4-
 Initializing SIM card in a normal telephone device and test its functionality. Set new PIN 6340. Without the correct PIN not





working properly
Unscrew the casing and insert the SIM card into the device - Figure 3 We plug the battery into the sockets - enable Figure 3 Reenclose the device.
The device is flashing green LED in 1s intervals. After registering and logging into the GSM network changes the interval to 2
seconds. Whether the device is registered as we want is possible to the phone call. If the device responds correctly, the green LED
is lit.
Place the unit for example in the car , we connect the car battery 12V/24V, while we watch for it to be the red wire to (+) and
battery (-) on black cord. Orange LED informs about battery charging facilities. If the battery is charged the light goes out.
Place the GPS antenna to have visibility to the satellites while being the least noticeable. Can be placed behind glass or plastic
housing. Be sure to control SMS that reads the current value.
The device can be recharged 12V to 30V DC adapter.
Operation of the device.
SMS can be sent from any tefonneho device that can send SMS. The shape of command is:
+command: <comment>
comment is optional and is only for us to know what to do command. Other SMS which device do not know as command - refuse
Commands device - sent SMS
+ini: - device initialization
No answer.
The initial command to initialize device. Command is not required
 Set a realistic date of the mobile device that sent the command
 Sets the phone number to which SMS alert device that is disconnected battery charging, or that the device has low voltage battery
and risk his discharge.
 Disable Parking
 Enables monitoring of battery charging
 The device does not send a warning that the command received. You'll find it from the command +status:
-5-
+status: - information on the state of the locator.
The answer is SMS
STATUS: DATE= 2010/08/01,09:08:29
UTC(18:26:41,21/09/2010)
Tel.No(H=+421911244333,P=+421902121321,R=)
GSM(Oper=SK 06,Signal=24)
GPS(LA=48.95,LO=018.16)
BATT(Status=YES,CHARGE=FULL,4.04V)
DATE= 2010/08/01,09:08:29 - date and time which was set up with command +ini. If this command was never sent, the date and time
will begin 01/01/2010
UTC(18:26:41,21/09/2010) – time and date from GPS loaded. According to the time zone may be different from real time. This should
be borne in mind.
Tel.No(H=+421911244333,P=+421902121321,R=+421911244333) – list of telephone numbers registered in the device
H= number from +-ini: command, to which the notifies the locator when disconnected from battery power or low voltage during
the discharge device.
P= - for control parking +park: at this point you see phone number, which controls the parking. If the function has not been
activated, then the P value is blank.
R= - command +roam: we will check for changes to the roaming operator. If this function is switch on then service is activated
and will send SMS when changing operator on phone number after "=".
GSM(Oper=SK 06,Signal=24) - GSM signal strength and operator, for which you are logged. The higher the quality the better signal. (value of
00 to 99).
GPS(LA=48.95,LO=018.16) – GPS position last loaded into device. LA is shortcut of Latitude and Longitude from LO. If you specify
such values in google or yahoo maps you look for the location of device.
BATT(Status=YES,CHARGE=FULL,4.04V) – control battery charging. Status=YES – ON, Status=NO - OFF. Function is switched
command +ini: (ON) and command –charge: (OFF)
CHARGE=FULL – battery charging status. FULL means that the battery is charged at 100%.CHARGE=NO – battery not charging.
CHARGE=YES – battery is charging from an external source.
4.04Vthe battery voltage in volts.
-6-
+gps: - GPS coordinates if you need these for other than google maps or bing.
The answer is SMS
GPS: Actual pos: UTC(Time= 10:07:24, Date= 21/09/2010)
LAT/LONG= 48.957228,018.164188
Speed = 0.25 km/h, Over sea = 268.8 m
Azimuth =212.7 degrees
GPS: - Actual pos: UTC: 17:20:39, Date: 03/08/2010 - GPS notified about type of command. Actual pos – means that it is a GPS position that is currently
loaded. otherwise will be announce - Last pos.
LAT/LONG= 48.957228,018.164188 – Latitude and Longitude coordinates loaded in UTC time and date. If you enter the coordinates in the example. google
maps to find the position of the device. In many countries, are popular on the Internet other than google maps and bing and this can be used in such cases.
Speed = 0.25 km/h, Over sea = 268.8 m – speed and altitude.
Azimuth =212.7
+bing: - GPS coordinates in the form of Bing MAPS.
The answer is SMS
.
BING: Last pos: UTC(10:09:20, 21/09/2010)
http://www.bing.com/maps/default.aspx?&lvl=15&style=r&sp=point.48.9572950000000_018.1642066666666_UTC:10:09:20, 21/09/2010_speed: 0.18 km/h
Over sea: 221.1m
BING - Last pos: UTC: 22:38:37,Date: 03/08/2010 answer to command type Last pos: means that it is not currently loaded value GPS, but the value loaded
in UTC time. The device may be located away from the GPS signal or the signal was not properly loaded. If it were a current loaded value, then the notice in the
form of - Actual pos.
http://www.bing.com/maps/default.aspx?& ... – command, which is sufficient to move into a web browser or mobile phone if it allows to directly log on to
internet and show the link to view the map position of the device bing.
Blank SMS – designed for google maps. SMS must be empty with no comments.
The answer is SMS
GOOGLE: Actual pos: UTC(15:47:34, 19/09/2010)
http://maps.google.com/?&maptype=roadmap&mobile=true&z=17&q=48.957208,018.164261
-7-
+park: – set function parking.
No answer.
Read phone number from the phone device which send command and set up service for this telephone number. Service can be used for any other phone device
who initiated the device with command +ini. In the case where that service members have already occupied, you receive SMS message.
NO PARKING: UTC(TIME = 12:58:52,DATE = 19/09/2010)
Park LAT/LONG = 48.95738,018.16409
New LAT/LONG = 48.95739,018.16376
Speed = 5.07 km/h
NO PARKING...: UTC = 12:55:55,Date = 02/08/2010 - information on the movement in time UTC
Park Lat,Long= 48.95741,018.16418
New Lat,Long= 48.95801,018.16545 – parking and new coordinates of the moving
If the park service is busy and try to re-initialize it, so we get a warning SMS for busy service
Parking reserved for +421902198535
UTC(TIME = 15:07:54,DATE = 09/10/2010)
GPS(LAT/LONG = 48.9572,018.1641)
If the car do not parking and sending SMS then service is available again. Service can be canceled only command + ini: or + reset:
Reliability of this command is somewhat limited by the quality of the GPS antenna location and accurately load the GPS values
+roam: - set function Roaming
-roam: - appeal roaming services
No answer.
Use of this service means sending SMS in case of change of operator. Service must also be supported and used for SIM card in the
device. When the operator changes, most often when crossing state borders, for example, but even if was not the GSM signal and
Locator was re-registered
ROAMING: UTC(TIME= 15:16:01,DATE = 23/07/2010 )
Old operator = "Orange SK", New operator="EUROTEL-SK"
GPS(LAT/LONG= 49.0360,018.1724)
-8-
ROAMING : UTC(TIME= 15:16:01,DATE = 23/07/2010 information that enabled the roaming function has changed in the UTC time
from the original operator „Orange SK“ to new operator "EUROTEL-SK"
GPS(LAT/LONG= 49.0360,018.1724) - coordinates on which this change has been
If the Roaming service is busy and try to re-initialize it, so we get a warning SMS for busy service.
Roaming reserved for +421902198535
UTC(TIME=15:07:29,DATE=09/10/2010)
GPS(LAT/LONG = 48.9572,018.1642)
-charge: - cancellation of service for monitoring the battery status and notice of discharge device
No answer.
The service is activated by command +ini: and we can control its setting by command +status:.
BATT Power interrupted:
UTC(Time= 13:25:09,Date= 22/10/2010)
GPS(LAT/LONG = 48.9571,018.1644)
BATT NO CHARGE, 3,87 Volt
BATT Power interrupted: - battery charging from an external source is interrupted
UTC(Time= 13:25:09,Date= 22/10/2010)
GPS(LAT/LONG = 48.9571,018.1644) – location where the device came to interrupt charging at the time UTC
BATT NO CHARGE, 4,10 V – Volt value when the internal battery has disconnected charging
If the value Volt drops to a critical value then will be send alert SMS message
BATT Volt Low:
UTC(Time= 19:21:21,Date= 21/10/2010)
GPS(LAT/LONG = 48.9571,018.1642)
BATT NO CHARGE, 3,58 Volt
BATT Volt Low:
GPS(LAT/LONG = 48.9571,018.1642) – position of the device with a critical value of voltage on internal battery at the time UTC
BATT NO CHARGE, 3,58 Volt – state voltage at the disconnected internal battery.
-9-
+moni: - list of parameters for the GSM SIM card registered. Command is useful when no GPS signal is available or is disturbed. The
disadvantage is the need for cooperation GSM operator.
The answer is SMS.
#MONI: EUROTEL-SK BSIC:76 RxQual:0 LAC:0009 Id:8429 ARFCN:55 PWR:-66dbm TA:1
Date real: 00/01/01,00:57:55
UTC(22:46:42, 26/09/2010)
Actual pos: LAT/LONG = 48.95716,018.16420
#MONI: - command, which covers an answer
EUROTEL-SK – operator, for which we are registered
Date real: 00/01/01,00:57:55 - time set in the module, which sets the command +ini: In this case, according to the time the show means
that the module was not initialized.
UTC: 09:59:43, 02/08/2010 – Date and time loaded by GPS
Actual pos: LAT/LONG=48.9571,018.1643 – loaded latitude and longitude coordinates in time UTC. Actual pos. means that a proper
load current value and not to an older time. In that case it will be referred to Last pos.
PWR:-66dbm – signal quality
+reset: - reset the device like the reset button on the front panel
No answer.
Deletes all previous settings. After successful execution of the command is flashing green status and after about 15-20 seconds, the
device registers to the network.
Parameters for proper operation.
• Environment - Temperature –20°C - +55°C
• Dry environment
• Charging DC 10 to 30V
• SIM CARD PIN setup for this device
• GPS antenna must be positioned so to ensure receipt of GPS and GSM signal
• The device is stored in plastic, rapid impact may cause damage to the
- 10 -
• Battery self-charge battery is more than 40 hours at ambient temperature + 10 ° C. Temperature decrease battery capacity
decreases.
UTC - Universal Time Coordinated
WARNING:
Strictly recommend to deactivate the device by
disconnecting the battery - Fig.3 in areas where they might
be inappropriate to use the device,
eg. in aircraft, hospitals etc.
Fig. 2 Front panel with reset button
LED orange-charging
LED green correct operation – flashes 2s
Figure 3 - open module. Place the SIM CARD and power on
www.abiks.sk
Slovakia
- 11 -
Contents:
1 x control unit
1 x GPS/GSM antenna
1 x cable for connection to car battery
1 x 12V DC adapter
SIM Card not included
Warranty: 24 months
- 12 -