Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
PRO² FILTERS FOR RESPIRATORY PROTECTIVE EQUIPMENT PRO² FILTERS Colour Code Code Weight Storage Time, years Filter Type Application 053070 PF10 P2/P3* Solid and liquid, toxic and radioactive particles, microorganisms, eg. bacteria, fungi, viruses, enzymes 69g 10 044071 A2 Gases and vapours from organic compounds with a boiling point higher than 65°C, eg. Toluene, Xylene, MEK, Benzene, Alcohol 84g 5 044072 A1B1E1 Gases and vapours from organic compounds with a boiling point higher than 65°C, inorganic and acid gases and vapours. eg. Toluene, Xylene, MEK, Benzene, Alcohols, Chlorine, Hydrogen Sulphide, Hydrogen Cyanide, Formaldehyde, Sulphur Dioxide, Hydrogen Chloride 102g 5 044073 A1B1E1K1 Gases and vapours from organic compounds with a boiling point higher than 65°C, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives. e.g. Toluene, Xylene, MEK, Benzene, Alcohols, Chlorine, Hydrogen Sulphide, Hydrogen Cyanide, Formaldehyde, Sulphur Dioxide, Hydrogen Chloride, Ammonia 102g 5 053067 Retainers Retainers together with the P2 pads are used in conjunction with Pro² gas and vapour filters to provide P2 protection and extend filter life (P2 pads sold separately) 053068 P2 Pads P2 pads fit inside the retainers to provide P2 protection and extend filter life 044081 A2 P2/P3* Gases and vapours from organic compounds with a boiling point higher than 65°C and solid and liquid hazardous particles. eg. Toluene, Xylene, MEK, Benzene, Alcohols, Dusts, mists, fumes, toxic particles 142g 5 044082 A1B1E1P2/P3* 140g 5 044083 A1B1E1K1P2/P3* Gases and vapours from organic compounds with a boiling point higher than 65°C, inorganic and acid gases and vapours and solid and liquid hazardous particles. eg. Toluene, Xylene, MEK, Benzene, Alcohols, Chlorine, Hydrogen Sulphide, Hydrogen Cyanide, Formaldehyde, Sulphur Dioxide, Hydrogen Chloride, Dusts, mists, fumes, toxic particles Gases and vapours from organic compounds with a boiling point higher than 65°C, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives and solid and liquid hazardous particles. e.g. Toluene, Xylene, MEK, Benzene, Alcohols, Chlorine, Hydrogen Sulphide, Hydrogen Cyanide, Formaldehyde, Sulphur Dioxide, Hydrogen Chloride, Ammonia, Dusts, mists, fumes, toxic particles 140g 5 (grams) PARTICLE FILTER GAS FILTER COMBINED FILTER NOTE! * P2 when used with Profile² Half Face Respirator and P3 when used with the Promask Twin Full Face Respirator The filtering device may be used only if the oxygen content of the air is 19.5 - 23.5 vol.%. The contaminants in the air must be identified and measured. Airborne contamination levels must be compared with acceptable limits. The Australia: Scott Safety* PO Box 876, Guildford, NSW 2161, Australia Phone: 131 772 Fax: 1800 651 772 Email: [email protected] * Scott Safety is a division of Rindin Enterprises Pty Limited ACN 089 330 914 maximum exposure limits must not be exceeded! The filtering device must not be used if the environment and contaminant are unknown or if the composition of the atmosphere is likely to change disadvantageously. In case of doubt, SCBA New Zealand: Scott Safety Private Bag 93011, New Lynn, Auckland, New Zealand Phone: (64 9) 826 1716 Fax: (64 9) 827 2288 Email: [email protected] or airline, which function independently from the atmosphere, must be used. Gas filters do not protect against particles and particle filters do not provide protection against gases or vapours. In case of doubt, use combined filters. www.scottsafety.com Profile² Promask Twin