Download Invited Presentation

10/2014
CURRICULUM VITAE
NAME: OSHIDA
(Last)
YOSHIKI_________________________________________________
(First)
(Initial)
STATUS:
Waseda University, Research Promotion Division, Advisor, August 2014
University of California San Francisco School of Dentistry, Adjunct Professor, January 2013
Indiana University, Professor Emeritus, June 2005
EDUCATION:
UNDERGRADUATE:
B.S. (1965) : Department of Metallurgical Engineering, Waseda University, Tokyo Japan
GRADUATE:
M.S. (1967) : Department of Chemical Engineering and Materials Science, Syracuse University, Syracuse NY
Thesis Title: "Transformation Plasticity of Steels and Titanium Alloys in Compression"
Ph.D. (1971):
Department of Materials Science, College of Science and Eng., Waseda University, Tokyo
Thesis Title: "On Structure of Initial Oxide Films Formed on Stainless Steel by WetOxidation”
POST DOCTORAL:
1978-1980:
Post-Doctoral Fellow, Department of Chemical Engineering and Materials Science,
Syracuse University, Syracuse NY
RESEARCH FELLOW:
1995:
National Institute of Standard and Technology (NIST)
ACADEMIC APPOINTMENTS:
2014 August
: Waseda University Research Promotion Division, Advisor
2013 January
: UC San Francisco School of Dentistry, Adjunct Professor
2010 June
: President, Japan Implant Practice Society
2009 April
: Waseda University, Invited Teaching Professor
2005 June
: Indiana University Professor Emeritus
2005/07- 2012/12: Research Professor, Syracuse University, Syracuse NY
1997/06- 2005/06: Indiana University Graduate Faculty (full appointment)
1998/07- 2005/06: Full-Professor, Indiana University School of Dentistry, IUPUI (tenured)
1991/07 - 2005/06: Indiana University School of Dentistry, Graduate Dental Faculty
1998/07 - 2005/06: Adjunct Professor, Matsumoto Dental University, Nagano, Japan
1
1998/07 – 2005/06: Adjunct Professor, Mechanical Engineering, Purdue University, IUPUI
1991/07 - 1998/06 : Associate Professor, Indiana University School of Dentistry, IUPUI
1989/07 - 1991/06 : Research Associate Professor, Syracuse University, Syracuse NY
1985/07 - 1989/06 : Research Assistant Professor, Syracuse University, Syracuse NY
1981/09 - 1985/06 : Senior Research Associate, Syracuse University, Syracuse NY
OTHER APPOINTMENTS AND PROFESSIONAL CONSULTANTSHIPS
1980 - 2000 : Technical Consultant, Metal Improvement Company, Paramus NJ
1970 - present : Technical Adviser, Oshida Patent Office, Tokyo Japan
1980- 2011 : Technical Adviser, Wall Patent Office, Syracuse NY
1980 - 2012 : Technical Consultant, JDR Systems, Syracuse NY
1990 - 2005 : Technical Consultant, Injury and Crash Analysis, Indianapolis IN
LICENSE AND CERTIFICATION:
1974: Licensed Technical Translator - Registration No.2977, issued by the Federation Internationale des
Traducteurs, Paris.
1985: Metals Engineering Institute, ASTM, in Corrosion (5.0 CEU).
1988: Society of Order of the Engineer.
2003: Certified Translator, Indiana Bureau of Motor Vehicles
PROFESSIONAL ORGANIZATIONS:
American Society for Metals (ASM), since 1985
American Institute for Mining, Metallurgical, and Petroleum Engineers (AIME), since 1985
International Academy of Shape Memory Metals for Medical Use (I-ASM3U), since 1990
International and American Association for Dental Research (IADR/AADR), since 1991
Japan Society of Oral Implantology (JSOI), since 1992
Japanese Society for Dental Materials and Devices (JSDMD), since 1993
HONORS AND AWARDS:
1977: Japan Institute of Casting Irons, Annual Academic Paper Award (Gold) to “On the Microstructures of
Superplastic Solid-State Bonded Parts in Cast Irons”
1982: Sigma Xi
1990: Fellow, International Academy of Shape Memory Materials for Medical Use (I-ASM3U)
1994: Editorial Advisory Board of Journal of Bio-Medical Materials and Engineering
2001: Distinguished Faculty Award for Research (IUSD Alumni Association)
2003: Honorable Member of the John F. Johnston Society.
2004: Editorial Review Board of Journal of Prosthetic Dentistry
2005: Indiana University Professor Emeritus
TEACHING ASSIGNMENTS:
1991/09-2004/06: “Dental Materials Science and Engineering” (G911), Spring Semester.
“Properties and Test Methods: Dental Materials” (G912), Fall Semester.
“Clinical Applications of Dental Materials” (G913), Spring Semester.
“Seminar” (G910), Spring/Fall Semesters.
1998/09-2004/06: pre-doctoral PBL (problem-based learning) mentor/tutor, 5-6 students each group
2006/08-2012/12: “Engineering Materials, Properties and Processes” (ECS 326)
“Materials and Processing in Manufacturing” (MFE 636)
2
SERVICE:
(1) Professional service
Editorial Advisory Board, Journal of Bio-Medical Materials and Engineering, 1994 - present
Editorial Review Board, Journal of Prosthetic Dentistry, 2004 – present
Invited Reviewer, Brazilian Dental Science Journal, 2012 – present
Reviewed articles submitted to the following journals;
International Journal of Prosthodontics, since 1991.
Implant Dentistry, since 1992.
American Journal of Orthodontics and Dentofacial Orthopedics, since 1992.
Journal of Dental Research, since 1996.
Scanning Microscopy International, since 1998.
European Journal of Oral Sciences, since 1998.
Journal of Prosthetic Dentistry, since 2000.
Biomaterials: since 2002.
Journal of Adhesive Dentistry: since 2002.
Acta Biomaterialia, 2005.
Journal Oral Rehabilitation, 2005.
Book review;
Journal of Metal publication, 2000
(2) University Committee service
1992 - 2005: IUSD Research Committee
1997 - 2005: IUPUI Library Committee
1997
: IUSD Graduate School MSD/MS/PhD Thesis Guidelines Subcommittee; function to revise the
current thesis guideline.
(3) Community service
Taught “Metallurgy For The Non-Metallurgist” course through the Indianapolis Chapter of American
Society for Metals. (1991)
Advisory member of Japan-America Society of Indiana. The Society is a non-profit association founded in 1988
by business, community and academic leaders. Its mission is to serve as a bridge of understanding and
cooperation between the people of Indiana and Japan.
Member of four different amateur orchestras, including Philharmonic Orchestra of Indianapolis (Indianapolis,
IN), Onondaga Civic Symphony Orchestra (Syracuse, NY), Yokohama Symphonic Orchestra (Yokohama, Japan),
and Ito Civic Philharmonic Orchestra (Ito, Japan).
PROFESSIONAL ACTIVITIES:
I. Teaching and lecturing activities
1991
: “Metallurgy for the Non-Metallurgist” for American Society for Metals, Indianapolis Chapter
1991
: “Corrosion” in “Dental Materials” (D612), IUSD.
1992 - 2005 : “Implant Materials” in “Implant Dentistry” (R940), IUSD
1992 - 2005 : “Current Concepts Lecture” (D826), Spring Semester, IUSD
1997 - 2005 : Special Lecture on “Implant Materials - Science and Technology”, IUSD Graduate Students
3
II. Professional Development
Attended Specialized Materials Science Research Seminar “Implantable Materials: Development, Utilization and
Critical Analysis”, Ann Arbor MI (October 1991).
Attended IADR/AADR annual meetings; Cincinnati OH (1990), Acapulco Mexico (1991), Boston MA (1992),
Chicago IL (1993), Seattle WA (1994), San Antonio (1995), San Francisco CA (1996), Orland FL (1997),
Minneapolis MN (1998). Vancouver Canada (1999), Washington DC (2000), Chicago (2001) and Chiba Japan
(2001),
San Diego (2002), San Antonio (2003), Honolulu (2004)
Attended “Improving Your Quality and Quantity of Restorative Dentistry” Indianapolis IN (September, 1992).
Attended Oral Implantology Symposium, Sendai Japan (July 1992).
Attended The American Academy of Fixed Prosthodontics, Chicago IL (February, 1994).
Attended The Titanium Symposium, Materials Week, ASM, Indianapolis IN (September, 1997).
GRANTS AND FELLOWSHIPS:
“Low Cycle Fatigue Damage Assessment” (with co-PI); funding source: Niagara Mohawk Power Corporation,
duration: 1982 – 1983, amount of fund: $100,000
“Fatigue Damage Assessment by X-ray Diffraction” (with co-PI); funding source: US Naval Research Center
duration: 1984 – 1987, amount of fund: $250,000
“High Temperature Low Cycle Fatigue Damage Characterization” (with co-PI); funding source: NASA Lewis
Research Center, duration: 1985 – 1990, amount of fund: $500,000
“Structure Analysis and Characterization of Oxides Formed on Cr-Ni-Fe Alloy during High Temperature Steam
and Steam/Air Oxidation”; funding source: Exxon Chemical Company, Basic Chemicals Technology Division
duration: 1988-1989, amount of fund: $60,000
“Fatigue Damage Characterization in Copper Thin Film”; funding source: IBM, Endicott Research Center,
duration: 1989 – 1991, amount of fund: $145,000
“Chemical Migration of Copper Deposits Under Applied Voltage - Its Related to Microstructure Improvement”;
funding source: IBM, Endicott Research Center, duration: 1992 – 1993, amount of fund : $24,995
“Effects of Surface Modification on Metal/Ceramic Bonding Strength”; funding source: Indiana University
Faculty Research Grant, duration: 1991 – 1992, amount of fund: $3,000
“Bonding Strength in Ti/Porcelain Restoration Systems”; funding source: Indiana University Faculty Research
Grant, duration: 1993 – 1995, amount of fund: $3,000
“Consolidation and Delivery Methods for a Metallic Direct-Filling Amalgam Alternative”; funding source:
National Institute of Standards and Technology (NIST), duration: 1995, amount of fund: $40,737 (IPA
agreement; Research Fellowship)
“Optical Microscopic Observation on Cross Sections of Various Orthodontic Archwires”; funding source: Ortho
Specialities, Ltd., duration: 1994, amount of fund: $3,800
4
“Corrosion Tests on Gallium-Based Restorative Alloys”; funding source: Southern Dental Industries, Ltd.,
duration: 1994-1995, amount of fund: $4,000
“Corrosion Evaluation of 2205 Dual-Phase Stainless Steel”; funding source: T.P.Orthodontics, Co.,
duration: 1994-1996, amount of fund: $3,800
“Application of MP II Adhesive Agent for Strength Improvement of PMMA Resins by Using Metallic Oxides
and Network”; funding source: GC Corporation, duration: 1996, amount of fund: $5,500
PUBLICATIONS: (Research or creative activities)
General presentation (currently)
1985
Y.Oshida and H.W.Liu; Grain Boundary Oxide Crack, Oxidation Accelerated Fatigue Crack Growth and
Fatigue Lives, the 40th Meeting on Mechanical Failure Prevention Group, Symposium on Use of New
Technology
to Improve Mechanical Readiness, Reliability and Maintainability, Washington, DC (April).
H.W.Liu and Y.Oshida; Grain Boundary Oxidation and Oxidation Accelerated Fatigue Crack Nucleation and
Propagation, Minnowbrook Conference on Life Prediction for High Temperature Gas Turbine Materials,
Minnowbrook NY, (August).
V.Weiss and Y.Oshida; Fatigue Damage Characterization by X-Ray Diffraction, Minnowbrook Conference on
Life Prediction for High Temperature Gas Turbine Materials, Minnowbrook NY, (August).
Y.Oshida and H.W.Liu; Grain Boundary Oxidation and an Analysis of the Effects of Pre-Oxidation on
Subsequent Fatigue Life, American Society of Testing Materials Symposium on Low Cycle Fatigue –
Direction for the Future, Sagamore NY (October).
1986
Y.Oshida and H.W.Liu; Grain Boundary Oxidation and Fatigue Crack Growth at Elevated Temperatures,
International Conf. on Role of Fracture Mechanics in Modern Technology, Fukuoka Japan (June).
1987
Y.Oshida; Biocompatibility vs. Biodeterioration, Int'l Conf. on Engineering Aspects of Shape Memory Alloys",
Detroit MI (August).
1989
P.C.Chen and Y.Oshida; Residual Stress Analysis of a Multi-Layer Thin Film Structure by Destructive
(Curvature) and Non- Destructive (X-Ray) Methods, MRS Spring Meeting, San Diego CA (April).
Y.Oshida, R.Sachdeva, S.Miyazaki and S.Fukuyo; Biological and Chemical Evaluation of TiNi Alloys,
International Conference on Martensitic Transformation (ICOMAT), Sydney Australia (June).
R.Sachdeva, S.Miyazaki, Y.Oshida and S.Fukuyo; Shape Memory NiTi Alloys - Applications in Dentistry,
International Conf. on Martensitic Transformation (ICOMAT), Sydney Australia (June).
1990
R.Sachdeva, R.Hathaway, Y.Oshida and S.Miyazaki; Load Deflection Characteristics of NiTi Coil Spring,
IADR/AADR, Cincinnati OH (March), Abstract #634.
5
Y.Oshida, S.Miyazaki and R.Sachdeva; Microanalytical Studies of Orthodontic NiTi Archwires,
IADR/ AADR, Cincinnati OH (March), Abstract #635.
P.C.Chen and Y.Oshida; Stresses of Chromium, Copper, and Kapton on Two Side Metallized Web,
the 33rd Annual Technical Conf., Soc. of Vacuum Coaters (SVC), New Orleans LA (April/May).
Y.Oshida and J.Daly; Fatigue Damage Evaluation of Shot Peened High Strength Aluminum Alloys,
International Conference of Surface Engineering, Toronto Canada (June).
S.Miyazaki, Y.Oshida and R.Sachdeva; Characterization and Development of Superelastic NiTi Alloys for
Orthodontic Applications, Int'l Conf. on Medical Application of Shape Memory Alloys (ICMASMA)
NiTi Alloys, Shanghai China (July).
R.Sachdeva, Y.Oshida, S.Fukuyo and S.Miyazaki; NiTi Alloys in Orthodontics - A Clinical and ThermoMechanical Evaluation -, International Conference on Medical Application of Shape Memory Alloys
(ICMASMA) NiTi Alloys, Shanghai China (July).
R.Sachdeva, S.Fukuyo, Y.Oshida and S.Miyazaki; NiTi Alloys in Orthodontics, Currents Uses and
Future Prospects - A Clinical Perspective -, International Conf. on Medical Application of Shape Memory
Alloys (ICMASMA) NiTi Alloys, Shanghai China (July).
Y.Oshida; Surface Phenomenon of Biomaterials, Tokyo Symposium on Dental Research Working Group,
Tokyo Japan (October).
Y.Oshida and J.Daly; Effects of Shot Peening on Fatigue-Damaged High Strength Aluminum Alloy,
nternational Conference of Shot Peening (ICP-4), Tokyo Japan (October).
Y.Oshida; Surface Characterization of Biomaterials, ASM3U Symposium Tokyo Japan (November).
1991
K.J.Blackwell, P.C.Chen and Y.Oshida; Yield Determination of the Thin Film Copper by Simple Bending
Test and X-Ray Diffraction, the 34th Annual Technical Conf., Soc. of Vacuum Coaters (SVC), Philadelphia PA
(March).
R.Sachdeva, Y.Oshida, J.Mark, S.Fukuyo and S.Miyazaki; Thermo-Mechanical and Surface Characterization
of Superelastic (SE) NiTi, International Association of Dental Research (IADR), Acapulco Mexico
(April), Abstract #1726.
R.Sachdeva, Y.Oshida, J.Schroeder and S.Miyazaki; Surface Characterization of Pre-Oxidized Biomaterials,
IADR Abstract #1727.
R.Sachdeva, Y.Oshida, S.Miyazaki, J.Wiger and J.Daly; Effects of Shot-Peening on Surface Contact Angles
of Biomaterials, IADR, Abstract #1728.
R.Sachdeva, Y.Oshida, J.Prewitt and S.Miyazaki; Corrosion Behavior of Superelastic (SE) NiTi, IADR,
Abstract #1725.
E.Shigeura, M.Sasaki, T.Ichinokawa, T.Yanase, T.Kobayashi, H.Shino, T.Hajima, Y.Ohtsuka, T.Sekine,
T.Satoh, Y.Oshida and K.Suzuki; Surface Observations of a 5-Year Implanted TiNi Alloy, ASM3U
Kyushu Conference, Fukuoka Japan (April).
1992
R.Sachdeva, S.Miyazaki, Y.Oshida, and F.Farzin-Nia; Effects of Copper Addition on Mechanical
Characteristics of NiTi Alloys, AADR, Boston MA (March), Abstract #275.
6
R.Sachdeva, F.Farzin-Nia, and Y.Oshida; The Effect of Bending on Austenitic Finish Temperature of
Orthodontic NiTi Wires, AADR, Boston MA (March), Abstract #276.
R.Sachdeva, F.Farzin-Nia, Y.Oshida, and S.Miyazaki; Load Deformation Characteristics of NiTi Orthodontic
Archwires, I-COMAT-92, Monterey CA (July).
R.Sachdeva, Y.Oshida, F.Farzin-Nia, and S.Miyazaki; Systemizing the Use of Superelastic TiNi Orthodontic
rchwires, I-COMAT-92, Monterey CA (July).
Y.Oshida, E.Sigeura, T.Sekine, H.Shino, and R.M.Pidaparti; Surface Characterization of Implanted BladeType TiNi Implants and Its Design-Related 3-D FEM Stress Analyses, Japan Society Oral Implantology,
Sendai Japan (July).
Y.Oshida, T.Seno, T.Nishihara, and A.Itoh; Fractal Characterization of Shot-Peened Surfaces,
Shot Peening - Theory and Applications -, Cincinnati OH (September).
1993
T.Yamagishi, M.Ito, Y.Oshida, and A.Hashem; Tensile Strength and Elongation of Laser-Welded Titanium,
IADR, Chicago IL, Abstract # 224.
K.Tajima, K.K.Chen, M.Terashita, Y.Kozono, Y.Oshida, and B.K.Moore; Occurrence of Marginal Enamel
Cracking in Composite Resin Restored Teeth, IADR, Chicago IL, Abstract # 262.
A.Hashem, Y.Oshida, W.F.Hohlt, B.K.Moore, and L.H.Tuneberg; Bonding Strength of Various Surface-Treated
Stainless Steel Orthodontic Bands, IADR, Chicago IL, Abstract #283.
Y.Oshida and B.K.Moore; Anodic Polarization Behavior and Microstructure of a Gallium-based Alloy,
ADR, Chicago IL, Abstract #919.
K.Tajima, Y.Kozono, K.K.Chen, M.Terashita, Y.Oshida, and B.K.Moore; Estimation of Enamel Cracking
in Composite-resin Restored Tooth using Structural Reliability Engineering Approach, The 22nd Dental Materials
Meeting, Fukuoka Japan, (September), Abstract No.P-27.
1994
Y.Oshida and A.Hashem; Oxidation Kinetics of Nitrided Pure Titanium During Porcelain Firing Process,
IADR, Seattle WA, Abstract #2449.
M.Ito, T.Yamagishi, A.Hashem and Y.Oshida; Experimental Development of a Chitosan Bonded Tricalcium Phosphate Bone Filling Paste, IADR, Seattle WA, Abstract #294.
Y.Oshida, A.Hashem, T.Nishihara, and M.V.Yapchulay; Fractal Dimension Analysis of Mandibular
Alveolar Bone, The 3rd World Congress for Oral Implantology, Yokohama Japan (September).
1995
E.J.Deschepper, Y.Oshida, B.K.Moore, N.B.Cook, and H.Eggertson; Corrosion behavior and
characterization of a gallium-based alloy, AADR, San Antonio TX, Abstract #736.
Y.Oshida, A Hashem, and R.Elsalawy; Some mechanistic observations on water-sorbed dental composite
resins, AADR, San Antonio TX, Abstract #1391.
1996
Y.Oshida, F.C.Eichmiller, and G.R.Stafford; Effects of condensers and particle size on hand-consolidated
Ag powder, AADR, San Francisco CA, Abstract #1748.
7
1997
Y.Oshida, A.G.Zuccari and B.K.Moore; Thickness and bulge ductility of several occlusal contact
measuring sheets, IADR/AADR, Orland FL, Abstract #3180.
M.Miyazaki, Y.Oshida, A.G.Zuccari, K.Fukuishi, and H.Onose; Effect of oxide powders on mechanical
properties of acrylic resins for dental applications, 4th International Conference on Composites Engineering
(ICCE), Honolulu HI (July).
1998
Y.Oshida and B.K.Moore; Water-sorption kinetics of PMMA resin under stressing, AADR,
Minneapolis MN, Abstract #784.
Y.Oshida, S.Isikbay and W.Panyayong; Effect of mixing conditions and starch addition on some physical
properties during polymerization of PMMA resin, AADR, Minneapolis MN, Abstract #785.
1999
W.Panyayong, C.J.Andres, and Y.Oshida; Effects of corn-starch and primer additions on mechanical
properties of provisional dental resin@, IADR, Vancouver, BC, Canada, Abstract #1022.
Y.J.Lim, M.Reyes, S.Thongthammachat, K.Sukchit, M.Panich, and Y.Oshida; AEffect of alpha/gamma
phase ratio on corrosion behaviors of dual-phase stainless steels, IADR, Vancouver, BC, Canada, Abstract #1036.
C.Kuphasuk, C.J.Andres, and Y.Oshida; Comparison of corrosion behaviors of six different Ti materials,
IADR, Vancouver, BC, Canada, Abstract #1039.
M.Miyazaki, Y.Oshida, K.Iwasaki, H.Onose, and B.K.Moore; Influence of bonding area and crosshead
speed on dentin bond, IADR, Vancouver, BC, Canada, Abstract #1649.
Y.Oshida, M.Olesen, F.Farzin-Nia, and R.Sachdeva; Corrosion behavior of Ti2N coated and un-coated
itanium materials in three different electrolytes, IADR, Vancouver, BC, Canada, Abstract #2330.
2000
J.M.Gaydos, M.A.Moore, L.P.Garetto, Y.Oshida and M.J.Kowolik; “Bisphosphonate effect on neutrophil
activation by titanium and hydroxyapatite implants”, IADR, Washington DC, Abstract # 890.
J.M.Gorthy, Y.Oshida and B.K.Moore; “Water sorption and solubility of resins with different filler levels”,
IADR, Washington DC, Abstract #1096.
M.Miyazaki, K.Iwasaki, H,.Onose, Y.Oshida and B.K.Moore; “High-resolution micro-raman laser spectroscopy
of the dentin hybrid layer” IADR, Washington DC, Abstract #1544.
Y.Oshida, M.Ito and B.F.Rhodes; “Cement bond strengths of three differently prepared titanium plates” IADR,
Washington DC, Abstract #1726.
Y.Oshida, Y.J.Lim, M.A.Moore, and M.J.Kowolik; “Initial contact angle measurements on various surfaces of
pure Ti using different media”, IADR, Washington DC, Abstract #1756.
B.K.Moore, J.A.Platt, and Y.Oshida; “Mechancial properties of four flexible denture base materials” IADR,
Washington DC, Abstract #1818.
M.A.Moore, Y.Oshida, L.P.Garetto and M.J.Kowolik; “Neutrophil response to titanium materials –
microcompatibility following various surface treatments” IADR, Washington DC, Abstract #2217.
8
Y.Oshida and Y.J.Lim; “Initial Contact Angle Measurements on Variously Treated Dental/Medical Titanium
Materials”, 2nd International Symposium on Contact Angle, Wettability and Adhesion, June 21/23, New Jersey NJ
Y.Oshida; “Requirements for Successful Biofunctional Implants”, Keynote Lecture, the 2nd International
Symposium of Advanced Biomaterials, June 28/July 2, Montreal Canada
Y.J.Lim, Y.Oshida, M.J.Kowolik, and J.P.Bidwell; “Initial Contact Angle Measurements on Various
Mechanically and Chemically Treated Commercially Pure Titanium and Titanium Alloys”, ibid.
2001
S.Dhanvarachorn, M.R.Lund, B.A.Mattis, B,K,Moore, Y.Oshida, J.A.Platt, and M.A.Cochran; “Physical
properties and fluoride release of high strength glass ionomeer cements”, AADR, Chicago IL, Abstract #1298.
T.Yoshida, S.Nagasawa, T.Mizoguchi, M.Ito, and Y.Oshida; “Laser welding of dental alloys”, AADR, Chicago
IL, Abstract # 1756.
S.Nagasawa, T.Yoshida, T.Mizoguchiu, M.Ito, and Y.Oshida; “Effects of repeated baking on porcelain bond
strength”, AADR. Chicago IL, Abstract # 571.
Y.Oshida, I.Garcia, M.Ito, and P.Monaghan; “Surface area ratio effects on galvanic corrosion of titanium
couples”, AADR, Chicago IL, Abstract # 798.
I.Garcia, Y.Oshida, C.Andres, S.Hovijitra, T.Barco, and D.Brown; “Galvanic corrosion of dental implant
materials”, AADR, Chicago IL, Abstract # 957.
C.Kuphasuk, Y.Oshida and M.Ito; “Comparison of corrosion behavior of cast, rolled
and metal-injected pure titanium” Journal Dent Res., 80, p.663 (Abstract No. 1094).
W.Lim, C.J.Andres, Y.Oshida, T.Shimizu and M.Ito; “Comparison of corrosion behavior among 4 grades of
commercially pure titanium” Journal Dent Res., 80, p.663 (Abstract No. 1093).
J-C Chang, R.L.Gregory, Y.Oshida, C.J.Andres and F.Farzin-Nia; “Electrochemical study on microbiological
corrosion of dental alloys” Journal Dent Res., 80, p.664 (Abstract No. 1097).
W.Panyayong, Y.Oshida and C.J.Andres; “Effects of addition of titania and zirconia mixtures on some
mechanical and physical properties of acrylic resins for provisional fixed restorations” Journal Dent Res., 80,
p.758 (Abstract No. 1852).
Y.J.Lim, Y.Oshida and M.Kowolik; “Surface characterization of variously modified pure titanium materials”
Journal Dent Res., 80, p.664 (Abstract No. 1098).
M.J.D.Reyes, Y.Oshida, C.J.Andres, T.Barco, D.Brown and S.Hovijitra; “A
comparison of bond strengths of
porcelain fired to treated titanium substrates” Journal Dent Res., 80, p.593 (Abstract No. 534).
T.Yoshida, M.Ito and Y.Oshida; “Galvanic corrosion behaviors of cp Ti coupes with three different precious
dental alloys in Ringer’s solution and 1% lactic acid” Journal Dent Res., 80, p.663 (Abstract No. 1095).
C.Kuphasuk, Y.Oshida and M.Ito; “Comparison of Electrochemical Corrosion Behavior of Cast, Rolled and
Metal-Injection-Molded Pure Titanium Samples” Proc. International Symposium on Titanium in Dentistry, p.111
(Abstract No. P-75).
W.Lim, C.J.Andres, Y.Oshida, T.Shimizu and M.Ito; “Comparison of Electrochemical Corrosion Behavior
Among 4 grades of Commercially Pure Titanium” Proc. Int’l Symposium on Titanium in Dentistry, p.112 (Abst.
No. P-76).
9
J-C Chang, R.L.Gregory, Y.Oshida, C.J.Andres and F.Farzin-Nia; “Electrochemical Studies on MicrobiologyRelated Corrosion of Dental Alloys” Proc. International Symposium on Titanium in Dentistry, p.113 (Abstract
No. P-77).
W.Panyayong, Y.Oshida and C.J.Andres; “Effects of Addition of Mixed Oxides Powder of Titania and Zirconia
on Some Mechanical and Physical Properties of Acrylic Resins for Provisional Fixed Restorations” Proc.
International Symposium on Titanium in Dentistry, p. 145 (Abstract No. P-109).
Y.J.Lim, Y.Oshida and M.Kowolik; “Contact Angle Measurements and Electrochemical Behaviors of Variously
Modified Titanium Materials” Proc.International Symposium on Titanium in Dentistry, p.134 (Abstract No. P98).
M.J.D.Reyes, Y.Oshida, C.J.Andres, T.Barco, D.Brown and S.Hovijitra; “Porcelain Bond Strengths, Fired to
Differently Treated Titanium Substrates” Proc. International Symposium on Titanium in Dentistry, p. 74
(Abstract No. P-38).
2002
Y.Oshida, R.Gregory, I-W.Koh, T.Yoshida, and M.Ito; “Effects of different electrolytes and surface area ratios
on galvanic corrosion. Jour Dent Res. 81:A-172 (Abstract # 1239).
T.Mizoguchi, T.Yoshida, N.Horasawa, S.Nagasawa, M.Ito, and Y.Oshida; “Reaction of dolomite to rat-extracted
ovary osteoporosis model” Jour Den Res. 81:A-106 (Abstract # 667).
S.Nagasawa, T.Yoshida, T.Mizoguichi, M.Ito, and Y.Oshida; “High temperature properties and solidification
structure of Au-Ag-Pd alloy” Jour Dent Res. 81:A-170 (Abstract # 1223).
K.Asawang, T.Mcbridge, V.John, Y.Oshida, and M.J.Kowolik; “Clinical instrumentation of titanium surfaces
alters neutrophil oxidative responses” Jour Dent Res. 81:A-274 (Abstract #2142).
Y.Oshida, J.A.Platt and B.Rhodes, “Fractographic Considerations on Dentine Bond Strengths” The 1st Intl
Congress on Adhesive Dentistry, Tokyo Japan.
J.A.Platt, Y.Oshida, B.Rhodes, J.Watson, H.Yagasaki, and M.Ito, “Microleakage Evaluation Following Occusal
Simulation Fatigue” ditto.
2003
Y.Oshida, Il-W. Koh, R.L.Gregory, J-C.Chang, S.Al-Ali, M.Iot, and F.Farzin-Nia; “Effects of Bacteria-Induced
Corrosion on Galvanic Couples of Cp Titanium with Other Dental Alloys”, ASM Materials & Processes for
Medical Devices, Anaheim CA .
Y.Oshida, Z.Khabbaz, W.Panyayong and Y.Lim; “Non-Destructive Characterization of Variously Treated
Titanium Surfaces”. ditto.
F.E.Hernandez, Y.Oshida, C.J.Andres, and M.T.Barco; “Corrosion Behavior of Commercially Pure Titanium
with Different Grades and from Different Suppliers”. ditto.
D.Carr, Y.Oshida, J.A.Platt, C.J.Andres, M.T.Barco and S.Hovijitra; “Effects of Pre-Fatigue on Remaining
Cement Bond Strength in a Cement-Retained Cera-One Implant System”. ditto.
M.R.Rosenthall, Y.Oshida, T.R.Katona, and F.Farzin-Nia; “Comparison of Frictional Forces between Three
Grades of Low Friction “Colors” TMA”. ditto.
10
W.Panyayong, K-T, Chu, Y.Oshida, J.A.Platt and G.Hernandez; “Improvements in Mechanical Properties of
Bone Cement Materials”. ditto.
Y.Oshida, K.Mirza, C.B.Sellers, W.Panyayong and F.Farzin-Nia; “Effects of Dental Treatment Agents on
Discoloration/Corrosion Behavior of Metallic Dental Materials”, ditto.
F.J.Torres, B.K.Moore, P.W.Naylor, C.J.Andres, Y.Oshida, and M.A.Cochran; “Shear Bond Strength of AllCeram and In-Ceram Materials with Five Surface Treatments”, AAD/IADR (Abstract # 244).
Z.Khabbaz, Y.Oshida, J.A.Platt and K.Yi; “Contact Angle and Ca/P Ratio of Caries-Affected Dentin”,
AADR/IADR (Abstract # 328).
G.Hernandez, Y.Oshida, J.A.Platt and C.J.Andres; “Reinforcement of Traditional Glass-Ionomer Cement”,
AADR/IADR (Abstract # 1280).
Y.Oshida, J.A.Platt and B.Rhodes; “Fractographic Studies on Dentin-Bonded Interfaces” AADR/IADR (Abstract
# 1618).
F.E.Hernandez, Y.Oshida and C.J.Andres; “Corrosion of Commercially Pure Titanium from Different Grades
and Suppliers” AADR/IADR (Abstract # 1670).
S.Al-Ali, C.J.Andres, M.T.Barco, D.T.Brown, S.Hovijitra and Y.Oshida; “Galvanic Corrosion of Titanium and
Dental Precious Alloy Couples” AADR/IADR (Abstract # 1671).
2004
C.B.Sellers and Y.Oshida; “Effects of Fluoride Treatment Agents on Dental Metallic Materials”, AADR/IADR
meeting, Honolulu Hi. (Abstract #0066).
K.Mirza and Y.Oshida; “Corrosiveness of Bleaching Agent on Dental Metallic Materials” ditto. (Abstract #0621).
.Dunigan-Miller and Y.Oshida; “Corrosion of Metal-Injection Molded Titanium in Three Electrolytes”, ditto.
(Abstract #0062).
W.Panyayong and Y.Oshida; “The Effects of Microleakage Penetration Dye Agents on Tooth Structure”, ditto.
(Abstract #
W.N.Tansathit, Y.Oshida, M.T.Barco, and J.A.Platt; “Acrylic Gel Application and Denture Tooth Tensile Bond
Strength”, ditto. (Abstract #3245).
T.Yoshida, T.Mizoguchi, S.Nagasawa, M.Ito, and Y.Oshida; “Laser Welding of Cobalt-Chrome Alloy and Gold
Alloy”, ditto.
Y.Oshida; “Surface Characterization of Variously Treated Implantable Cp Titanium” WCOI6, Honolulu, Hawaii.
P.Agarwal, Y.Oshida, and M. Ito; “Effects of Surface Modification of Ti on Cement Bond Strengths”, 2 nd ASM
Conference on Materials & Processes for Medical Devices, Minneapolis. (Abstarct # P-1.13).
Y.Oshida, F. Farzin-Nia, M.Ito, and W.Panyayong; “Passivation Stability of Titanium”, ditto. (Abstract #S-11A3).
2005
11
H.Abu Al Nasr and Y.Oshida, “Corrosion Comparison of Stainless Steels with Three Different Ni Contents”
AADR/IADR, March, Baltimore MD.
K.Mirza and Y.Oshida, “Passivation Stability of Commercially Pure titanium”, ditto.
Y.Oshida and W.Panyayong, “The Effects of Microleakage Penetration Dye Agents on Tooth Structure”,
The 2nd Int’l Congress on Adhesive Dentistry, April, Tokyo Japan.
2007
C.Elias, J.Lima, Y.Oshida, C.Muller, “Surface properties and removal torque of dental implants”, TMS
“Biological Materials Science” Meeting, Orland FL, 02/25 – 03/01.
Invited Presentation
1991
Y.Oshida; Mechanical and chemical properties of biomaterials and their characterizations, Waseda Univ.
Graduate School Seminar, Tokyo Japan (November).
Y.Oshida; Biocomptibility and mechano-compatibility of dental implants including shape memory materials,
ASM3U, Nagoya Meeting, Nagoya Japan (November).
Y.Oshida; Biocompatibility and mechano-compatibility of dental implants, ASM3U Tokyo Meeting, Tokyo Japan
(November).
1994
Y.Oshida; Materials Science and Technology in Dentistry, Kyusyu Dental Association, Kyusyu Dental
College, Fukuoka Japan (April).
Y.Oshida; Dental Materials - Today and Perspective -, Fukuoka Dental Association, Fukuoka Japan (April).
Y.Oshida; The Titanium/Porcelain System for Metal-Ceramic Restorations, IUSD Alumni Association
Fall Conference, Bloomington IN (October).
1995
Y.Oshida; Dental Materials - Science and Technology, Matsumoto Dental College, Nagano Japan (September).
1996
Y.Oshida; Consolidation of fine silver powders as a substitute for mercury-containing dental amalgams,
AADR Indiana Section Seminar, Indianapolis IN (March).
Y.Oshida; Reinforcement of PMMA rsins for provisional crowns, IUSD Alumni Association Fall Conference,
Bloomington IN (October).
1997
Y.Oshida; Water-sorption behavior of PMMA resins under stressing condition, IUSD Alumni Association Fall
Conference, Bloomington, IN (September).
1998
Y.Oshida; Improvement of provisional polymeric resins, AADR, Indiana Section Seminar, Indianapolis IN
(February).
1999
Y.Oshida; “Oxide crystallography and micro-roughness of titanium surface ,and its effect on neutrophil
granulocyte activity” The 15th SMU meeting, Matsumoto Dental Uni., Aug. 7/8.
12
Y.Oshida; “Required compatibilities and surface characterization of titanium implant materials” The graduate
school seminar, Department of Mechanical Engineering, Waseda University, Tokyo Japan, Aug 2.
Y.Oshida; “Required compatibilities and surface characterization of titanium implant materials” The graduate
school seminar, School of Dentistry, Kyushu University, Fukuoka Japan, Aug 9.
Y.Oshida; “Required compatibilities and surface characterization of titanium implant materials” The graduate
school seminar, School of Dentistry, Hiroshima University, Hiroshima Japan, Aug 11.
Y.Oshida; “Required compatibilities and surface characterization of titanium implant materials” The graduate
school seminar, Matsumoto Dental University, Nagano Japan, Aug 13.
2000
Y.Oshida; “Requirements for Successful Biofunctional Implants” Joint Meeting of the 2 nd International
Symposium on Advanced Biomaterials and the 7th International Academy of Shape Memory Materials for
Medical Use, Montreal Canada, June 30. – keynote speaker Y.Oshida; “Current Status and future Perspective of Dental Materials and Engineering” Seoul University School,
of Dentistry, December 18.
Y.Oshida; “Implant Materials and Technology” Korean Academy of Implantology, December 22.
2001
Y.Oshida; “Corrosion Concerns about Dental Titanium Materials” International Symposium on Titanium in
Dentistry, June 30.
Y.Oshida; “Requirements for Successful Implant Systems” International Symposium on Titanium in Dentistry,
July 1.
Y.Oshida; “Dental/medical application of fractal dimension topographic analysis”, Graduate School Seminar,
Waseda University, July.
2002
Y.Oshida; “Dentistry in the 21st Century and Beyond”, H. Noguchi Medical and Dental Research Institute,
Tokyo, February.
Y.Oshida; “Dentistry in Future Perspective”, Nihon University School of Dentistry, Pre-Doctoral Seminar,
Tokyo, April.
Y.Oshida; “Dental/Medical Titanium Materials, 21st Century and Beyond” H. Noguchi Medical and Dental
Research Institute, Tokyo, September.
Y.Oshida; “Some Considerations on Dentin Bond Strengths”, Tokyo Medical and Dental University. Tokyo,
September.
2003
Y.Oshida; “Dentistry Now”, The 3rd Noguchi Medial Research Institute, Dentist Alumni Association Seminar,
Tokyo, September.
Y.Oshida; “Sport Dentistry – MouthGuard”, Mouth Guard Research Center, Nagoya, September.
Y.Oshida; “Non-destructive characterization of caries-affected dentin” Kyushu Dental Association, Hakata,
September.
Y.Oshida; “Characterization of caries-affected tooth structure”, Nihon University School of Dentistry, Graduate
Operative Seminar, Tokyo, September.
2004
Y.Oshida; “Performance Effectiveness of MouthGuard”, The 2nd meeting, Mouth Guard Research Center
Seminar, Nagoya, September.
Y.Oshida; “Requirements for Biofunctional Dental Implant Systems”, The J.F.Johnston Society, Refresher
Course, June.
2005
Y.Oshida; keynote speaker “Medical Bio-Titanium Materials, Current Status and Future”, The 18th conference on
Titanium Medical Materials, February, Shiojiri, Nagano.
13
Y.Oshida; “What is new in medical health care services for the aged society – technology and materials”, Waseda
Institute for Life Science, Special Seminar, February, Kagamihara, Gifu.
2007
Y.Oshida; “PBL – New Method for Learning”, Showa University.
Y.Oshida; “PBL – New Method for Learning”, Tokushima University.
Y.Oshida; “PBL – New Method for Learning”, Istanbul University, Turkey. Turkish Pedodontics Society.
Y.Oshida; “Current Status of Dental Materials and Research Activities” Istanbul University.
2008
Y.Oshida; “Tooth Whitening”, Dental Professions, Osaka, Nagoya, Tokyo, November
Y.Oshida; “Implant, and its required compatibilities”, Tokyo Dental College.
2009
Y.Oshida, :Tooth Whitening,” Dental Professions, Nagoya, Osaka, Tokyo, May
14
Abstract and Proceeding (since 1991)
1991
1. R.Sachdeva, Y.Oshida, J.Prewitt and S.Miyazaki; “Corrosion Behavior of Superelastic (SE) NiTi”, Jour.
Dental Res., 70, p.482 (Abstract No. 1725).
2. R.Sachdeva, Y.Oshida, J.Mark, S.Fukuyo and S.Miyazaki; “Thermal Mechanical and Surface
Characterization of Superelastic (SE) NiTi”, Jour. Dental Res., 70, p.482 (Abstract No. 1726).
3. R.Sachdeva, Y.Oshida, J.Schroeder and S.Miyazaki; “Surface Characterization of Pre-Oxidized
Biomaterials”, Jour. Dental Res., 70, p.482 (Abstract No. 1727).
4. R.Sachdeva, Y.Oshida, S.Miyazaki, J.Wiger and J.Daly; “Effects of Shot-Peening on Surface Contact
Angles of Biomaterials”, Jour. Dental Res., 70, p.482 (Abstract No.1728).
1992
5. R.Sachdeva, F.Farzin-Nia, and Y.Oshida; “The effect of bending on austenitic finish temperature of
orthodontic NiTi wires”, Jour. of Dental Res., 71, p.140 (Abstract No. 276).
6. R.Sachdeva, S.Miyazaki, Y.Oshida, and F.Farzin-Nia; “Effects of Copper Addition on Mechanical
Characteristics of NiTi Alloys”, Jour. of Dental Res., 71, p.140 (Abstract No. 275).
7. Y.Oshida, E.Shigeura, T.Sekine, H.Shino, and P.M.V.Padaparti; “Surface Characterization of Implanted
Blade-Type TiNi Implants and Its Design-Related 3-D FEM Stress Analyses”, The 22nd Annual Meeting of
Japanese Soc. of Oral Implantology, p.163 (Abstract No. 1-B-38).
1993
8. T.Yamagishi, M.Ito, Y.Oshida, and A.Hashem; “Tensile Strength and Elongation of Laser-Welded
Titanium”, Jour. Dental Res., 72, p.131 (Abstract No. 224).
9. K.Tajima, K.K.Chen, M.Terashita, Y.Kozono, Y.Oshida, and B.K.Moore; “Occurrence of marginal
enamel cracking in composite resin restored teeth”, Jour. Dental Res., 72, p.136 (Abstract No. 262).
10. A.Hashem, Y.Oshida, W.F.Hohlt, B.K.Moore, and L.H.Tuneberg; “Bonding Strength of Various
Surface-Treated Stainless Steel Orthodontic Bands”, Jour. Dental Res., 72, p.139 (Abstract No. 283).
11. Y.Oshida and B.K.Moore; “Anodic Polarization Behavior and Microstructure of a Gallium-based Alloy”,
Jour. Dental Res., 72, p.218 (Abstract No. 919).
1994
12. M.Ito, T.Yamagishi, A.Hashem and Y.Oshida; “Experimental Development of a Chitosan Bonded Tricalcium Phosphate Bone Filling Paste”, Jour. Dental Res., 73, p.138 (Abstract No. 294).
13. Y.Oshida and A.Hashem; “Oxidation Kinetics of Nitrided Pure Titanium During Porcelain Firing Process”,
Jour. Dental Res., 73, p.408 (Abstract No. 2449).
14. Y.Oshida, A.Hashem, T.Nishihara, and M.V.Yapchulay; “Fractal Dimension Analysis of Mandibular
Alveolar Bone”, The 3rd World Congress for Oral Implantology, p.202 (Abstract No. F-124).
1995
15. E.J.Deschepper, Y.Oshida, B.K.Moore, N.B.Cook, and H.Eggertson; “Corrosion behavior and
characterization of a gallium-based alloy”, Jour. Dental Res., 74, p.103 (Abstract No. 736).
16. Y.Oshida, A Hashem, and R.Elsalawy; “Some mechanistic observations on water-sorbed dental composite
resins” Jour. Dental Res., 74, p.185 (Abstract No. 1391).
1996
17. Y.Oshida, F.C.Eichmiller, and G.R.Stafford; “Effects of Condensers and Particle Size on HandConsolidated Ag Powder”, Jour. Dental Res., 75, p.236 (Abstract No.1748).
1997
18. Y.Oshida, A.G.Zuccari and B.K.Moore; “Thickness and bulge ductility of occlusal contact sheets”, Jour.
Dent Res., 76, p. 411 (Abstract No. 3180).
19. M.Miyazaki, Y.Oshida, A.G.Zuccari, K.Fukuishi, and H.Onose; “Effect of oxide powders on mechanical
properties of acrylic resins for dental applications” ICCE.
1998
20. Y.Oshida and B.K.Moore; “Water-sorption kinetics of PMMA resin under stressing”, Jour. Dental Res.,
77, (Abstract No. 784).
21. Y.Oshida, S.Isikbay, and W.Panyayong; “Effect of mixing and starch addition on some physical properties
during polymerization of PMMA resin”, Jour. Dental Res., 77, (Abstract No. 785).
15
1999
22. Y.Oshida, M.Olsen, F.Farzin-Nia, and R.Sachdeva; “Corrosion behavior of Ti2N coated and un-coated
Titanium materials in three different electrolytes”, Jour. Dental Res., 78 p.397 (Abstract No. 2330).
23. C.Kuphasuk, C.J.Andres, and Y.Oshida; “Comparison of corrosion behaviors of six different Ti materials”,
Jour. Dental Res., 78, p. 235 (Abstract No. 1039).
24. Y.J.Lim, M.Reyes, S.Thongthammachat, K.Sukchit, M.Panich, and Y.Oshida; “Effect of alpha/gamma
phase ratio on corrosion behaviors of dual-phase stainless steels”, Jour. Dental Res., 78, p.235 (Abstract
No.1036).
25. W.Panyayong, C.J.Andres, and Y.Oshida; “Effects of corn-starch and primer additions on mechanical
properties of provisional dental resin”, Jour. Dental Res., 78, p. 233 (Abstract No,. 1022).
26. M.Miyazaki, Y.Oshida, H.Onose, and B.K.Moore; “Influence of bonding are and crosshead speed on dentin
bond”, Jour. Dental Res., 78, p. 312 (Abstract No. 1649).
2000
27. J.M.Gaydos, M.A.Moore, L.P.Garetto, Y.Oshida and M.J.Kowolik; “Bisphosphonate effect on neutrophil
activation by titanium and hydroxyapatite implants”, Jour. Dent Res., 79, p.225 (Abstract No. 890).
28. J.M.Gorthy, Y.Oshida and B.K.Moore; “Water sorption and solubility of resins with different filler levels”,
Jour. Dent Res., 79, p.280. (Abstract No.1096).
29. M.Miyazaki, K.Iwasaki, H,.Onose, Y.Oshida and B.K.Moore; “High-resolution micro-raman laser
spectroscopy of the dentin hybrid layer” Jour. Dent Res., 79, p.336 (Abstract No.1544).
30. Y.Oshida, M.Ito and B.F.Rhodes; “Cement bond strengths of three differently prepared titanium plates”
Jour Dent Res., 79, p.359 (Abstract No.1726).
31. Y.Oshida, Y.J.Lim, M.A.Moore, and M.J.Kowolik; “Initial contact angle measurements on various surfaces
of pure Ti using different media”, Jour Dent Res., 79, p.363 (Abstract No.1756).
32. B.K.Moore, J.A.Platt, and Y.Oshida; “Mechancial properties of four flexible denture base materials” Jour
Dent Res., 79, p.371 (Abstract No.1818).
33. M.A.Moore, Y.Oshida, L.P.Garetto and M.J.Kowolik; “Neutrophil response to titanium materials –
microcompatibility following various surface treatments” Jour Dent Res., 79, p.421 (Abstract No.2217).
2001
34. S.Nagasawa, T.Yoshida, T.Mizoguchi, M.Ito, and Y.Oshida; “Effects of Repeated Baking on Porcelain
Bond Strength” Jour Dental Res., 80, p.108 (Abstract No.571)
35. T.Yoshida, S.Nagasawa, T.Mizoguchi, M.Ito, and Y.Oshida; “Laser Welding of Dental Alloys” Jour dental
Res., 80, p.255 (Abstract No. 1756).
36. I.Garcia, Y.Oshida, C.Andres, S.Hovijitra, T.Barco, and D.Brown; “Galvanic Corrosion of Dental Implant
Materials” Jour Dental Res., 80, p.155 (Abstract No. 957).
37. Y.Oshida, I.Garcia, M.Ito, and P.Monaghan; “Surface Area Effects on Galvanic Corrosion of Titanium
Couples” Jour Dental Res., 80, p.135 (Abstract No. 798).
38. S.Dhanvarachorn, Y.Oshida, M.Cochran, M.Lund, B.Moore, J.Platt; “Fracture Toughness, Wear Resistance,
and Fluoride Release of High Strength Glass Ionomer Cements” Jour Dental Res., 80, p.198 (Abstract No.
1298).
39. C.Kuphasuk, Y.Oshida and M.Ito; “Comparison of corrosion behavior of cast, rolled and metal-injected pure
titanium” Journal Dent Res., 80, p.663 (Abstract No. 1094).
40. W.Lim, C.J.Andres, Y.Oshida, T.Shimizu and M.Ito; “Comparison of corrosion behavior among 4 grades of
commercially pure titanium” Journal Dent Res., 80, p.663 (Abstract No. 1093).
41. J-C Chang, R.L.Gregory, Y.Oshida, C.J.Andres and F.Farzin-Nia; “Electrochemical study on
microbiological corrosion of dental alloys” Journal Dent Res., 80, p.664 (Abstract No. 1097).
42. W.Panyayong, Y.Oshida and C.J.Andres; “Effects of addition of titania and zirconia mixtures on some
mechanical and physical properties of acrylic resins for provisional fixed restorations” Journal Dent Res.,
80, p.758 (Abstract No. 1852).
43. Y.J.Lim, Y.Oshida and M.Kowolik; “Surface characterization of variously modified pure titanium materials”
Journal Dent Res., 80, p.664 (Abstract No. 1098).
44. M.J.D.Reyes, Y.Oshida, C.J.Andres, T.Barco, D.Brown and S.Hovijitra; “A comparison of bond strengths of
porcelain fired to treated titanium substrates” Journal Dent Res., 80, p.593 (Abstract No. 534).
45. T.Yoshida, M.Ito and Y.Oshida; “Galvanic corrosion behaviors of cp Ti coupes with three different precious
dental alloys in Ringer’s solution and 1% lactic acid” Journal Dent Res., 80, p.663 (Abstract No. 1095).
16
46. C.Kuphasuk, Y.Oshida and M.Ito; “Comparison of Electrochemical Corrosion Behavior of Cast, Rolled and
Metal-Injection-Molded Pure Titanium Samples” Proc. International Symposium on Titanium in Dentistry, p.
111 (Abstract No. P-75).
47. W.Lim, C.J.Andres, Y.Oshida, T.Shimizu and M.Ito; “Comparison of Electrochemical Corrosion Behavior
Among 4 grades of Commercially Pure Titanium” Proc. International Symposium on Titanium in Dentistry,
p.112 (Abstract No. P-76).
48. J-C Chang, R.L.Gregory, Y.Oshida, C.J.Andres and F.Farzin-Nia; “Electrochemical Studies on
Microbiology-Related Corrosion of Dental Alloys” Proc. International Symposium on Titanium in Dentistry,
p.113 (Abstract No. P-77).
49. W.Panyayong, Y.Oshida and C.J.Andres; “Effects of Addition of Mixed Oxides Powder of Titania and
Zirconia on Some Mechanical and Physical Properties of Acrylic Resins for Provisional Fixed Restorations”
Proc. International Symposium on Titanium in Dentistry, p. 145 (Abstract No. P-109).
50. Y.J.Lim, Y.Oshida and M.Kowolik; “Contact Angle Measurements and Electrochemical Behaviors of
Variously Modified Titanium Materials” Proc. International Symposium on Titanium in Dentistry, p.134
(Abstract No. P-98).
51. M.J.D.Reyes, Y.Oshida, C.J.Andres, T.Barco, D.Brown and S.Hovijitra; “Porcelain Bond Strengths, Fired to
Differently Treated Titanium Substrates” Proc. International Symposium on Titanium in Dentistry, p. 74
(Abstract No. P-38).
2002
52. Y.Oshida, R.Gregory, I-W.Koh, T.Yoshida, and M.Ito; “Effects of different electrolytes and surface area
ratios on galvanic corrosion. Jour Dent Res. 81:A-172 (Abstract # 1239).
53. T.Mizoguchi, T.Yoshida, N.Horasawa, S.Nagasawa, M.Ito, and Y.Oshida; “Reaction of dolomite to ratextracted ovary osteoporosis model” Jour Den Res. 81:A-106 (Abstract # 667).
54. S.Nagasawa, T.Yoshida, T.Mizoguichi, M.Ito, and Y.Oshida; “High temperature properties and
solidification structure of Au-Ag-Pd alloy” Jour Dent Res. 81:A-170 (Abstract # 1223).
55. K.Asawang, T.Mcbridge, V.John, Y.Oshida, and M.J.Kowolik; “Clinical instrumentation of titanium
surfaces alters neutrophil oxidative responses” Jour Dent Res. 81:A-274 (Abstract #2142).
56. Y.Oshida, J.A.Platt and B.Rhodes, “Fractographic Considerations on Dentine Bond Strengths” The 1st Intl
Congress on Adhesive Dentistry, Tokyo Japan.
57. J.A.Platt, Y.Oshida, B.Rhodes, J.Watson, H.Yagasaki, and M.Ito, “Microleakage Evaluation Following
Occusal Simulation Fatigue” ditto.
2003
58. Y.Oshida, Il-W. Koh, R.L.Gregory, J-C.Chang, S.Al-Ali, M.Ito, and F.Farzin-Nia; “Effects of BacteriaInduced Corrosion on Galvanic Couples of Cp Titanium with Other Dental Alloys”, ASM Materials &
Processes for Medical Devices, Anaheim CA .
59. Y.Oshida, Z.Khabbaz, W.Panyayong and Y.Lim; “Non-Destructive Characterization of Variously Treated
Titanium Surfaces”. ditto.
60. F.E.Hernandez, Y.Oshida, C.J.Andres, and M.T.Barco; “Corrosion Behavior of Commercially Pure
Titanium with Different Grades and from Different Suppliers”. ditto.
61. D.Carr, Y.Oshida, J.A.Platt, C.J.Andres, M.T.Barco and S.Hovijitra; “Effects of Pre-Fatigue on Remaining
Cement Bond Strength in a Cement-Retained Cera-One Implant System”. ditto.
62. M.R.Rosenthall, Y.Oshida, T.R.Katona, and F.Farzin-Nia; “Comparison of Frictional Forces between Three
Grades of Low Friction “Colors” TMA”. ditto.
63. W.Panyayong, K-T, Chu, Y.Oshida, J.A.Platt and G.Hernandez; “Improvements in Mechanical Properties of
Bone Cement Materials”. ditto.
64. Y.Oshida, K.Mirza, C.B.Sellers, W.Panyayong and F.Farzin-Nia; “Effects of Dental Treatment Agents on
Discoloration/Corrosion Behavior of Metallic Dental Materials”, ditto.
65. F.J.Torres, B.K.Moore, P.W.Naylor, C.J.Andres, Y.Oshida, and M.A.Cochran; “Shear Bond Strength of AllCeram and In-Ceram Materials with Five Surface Treatments”, AAD/IADR (Abstract # 244).
66. Z.Khabbaz, Y.Oshida, J.A.Platt and K.Yi; “Contact Angle and Ca/P Ratio of Caries-Affected Dentin”,
AADR/IADR (Abstract # 328).
67. G.Hernandez, Y.Oshida, J.A.Platt and C.J.Andres; “Reinforcement of Traditional Glass-Ionomer Cement”,
AADR/IADR (Abstract # 1280).
17
68. Y.Oshida, J.A.Platt and B.Rhodes; “Fractographic Studies on Dentin-Bonded Interfaces” AADR/IADR
(Abstract # 1618).
69. F.E.Hernandez, Y.Oshida and C.J.Andres; “Corrosion of Commercially Pure Titanium from Different
Grades and Suppliers” AADR/IADR (Abstract # 1670).
70. S.Al-Ali, C.J.Andres, M.T.Barco, D.T.Brown, S.Hovijitra and Y.Oshida; “Galvanic Corrosion of Titanium
and Dental Precious Alloy Couples” AADR/IADR (Abstract # 1671).
2004
71. C.B.Sellers and Y.Oshida; “Effects of Fluoride Treatment Agents on Dental Metallic Materials”, ditto.
(Abstract #0066).
72. K.Mirza and Y.Oshida; “Corrosiveness of Bleaching Agent on Dental Metallic Materials” ditto. (Abstract #
0621).
73. J.Dunigan-Miller and Y.Oshida; “Corrosion of Metal-Injection Molded Titanium in Three Electrolytes”,
ditto. (Abstract #0062).
74. W.Panyayong and Y.Oshida; “The Effects of Microleakage Penetration Dye Agents on Tooth Structure”,
ditto. (Abstract #0497).
75. W.N.Tansathit, Y.Oshida, M.T.Barco, and J.A.Platt; “Acrylic Gel Application and Denture Tooth Tensile
Bond Strength”, ditto. (Abstract #3245).
76. T.Yoshida, T.Mizoguchi, S.Nagasawa, M.Ito, and Y.Oshida; “Laser Welding of Cobalt-Chrome Alloy and
Gold Alloy”, ditto. (Abstract #1899).
77. Y.Oshida; “Surface Characterization of Variously Treated Implantable Cp Titanium” WCOI6, Honolulu,
Hawaii.
78. P.Agarwal, Y.Oshida, and M. Ito; “Effects of Surface Modification of Ti on Cement Bond Strengths”, 2 nd
ASM Conference on Materials & Processes for Medical Devices, Minneapolis. (Abstract #O-23).
79. Y.Oshida, F. Farzin-Nia, M.Ito, and W.Panyayong; “Passivation Stability of Titanium”, ditto. (Abstract #P08).
2005
80. H.Abu Al Nasr and Y.Oshida, “Corrosion Comparison of Stainless Steels with Three Different Ni Contents”
AADR/IADR, March, Baltimore MD
81. K.Mirza and Y.Oshida, “Passivation Stability of Commercially Pure titanium”, ditto.
82. Y.Oshida and W.Panyayong, “The Effects of Microleakage Penetration Dye Agents on Tooth Structure”,
The 2nd Int’l Congress on Adhesive Dentistry, April, Tokyo Japan
2014
83. Y.Oshida, “Requirements for Successful Implant Systems- from Biomaterial, Bioscience and Biomechanics
Aspects”, the 2nd ACC (Asian Clinical Congress), Kyoto, Japan
Book
01. Y.Oshida; “Bioscience and Bioengineering of Titanium Materials”, Elsevier, 1st edition, 2005.
02. Y.Oshida; “Bioscience and Bioengineering of Titanium Materials”, Elsevier, 2nd edition, 2011.
03. Y.Oshida; “Surface Engineering and Technology for Biomedical Implants” Momentum Press,
January 2014.
04. Y.Oshida; “Hydroxyapatite – Synthesis and Applications” Momentum Press, December 2014.
05. Y.Oshida; “Integrated Dental Implantology” Momentum Press, approved
Book Chapters
01.Y.Oshida; “Surface Characterization and Microanalytical Studies on TiNi Shape Memory Dental Device”,
Chapter 2 in a book “Perio Root Implant and Medical Application of Shape Memory Alloy” ed. by S.
Fukuyo et al., ASMU, Tokyo, pp.17/30, 1992.
02. B.K.Moore and Y.Oshida; “Materials Science and Technology in Dentistry”, Chapter 48 in “Encyclopedic
Handbook of Biomaterials and Bioengineering” Part B, Vol. 2, ed. by D.L.Wise, Marcel Dekker, Co.
18
pp.1325/1430, 1995.
03. M.Miyazaki, Y.Oshida, N.Onose; “Dentin bonding systems; Factors affecting bond
strength” Chapter 5, in “Modern Trends in Adhesive Dentistry”, Kuraray CO., Japan,
pp.55/73, 1999.
04. Y.Oshida and F.Farzin-Nia; Chapter 17 “Progressive damage assessment of TiNi
endodontic files”, in “Shape Memory Implants” ed. by LYahia, Springer, pp.236/249, 2000.
05. Y.Oshida; “Science- and Technology-Integrated Titanium Implant Systems” in “Advanced
Biomaterilas” ed. by B. Basu, to be published from Wiley, 2008.
06. Y.Oshida and F.Farzin-Nia; “Chemical Reaction and Oxidation” in “Shape Memory Alloys
for Biomedical Applications” ed. by T.Yoneyama and S. Miyazaki, to be published from
Woodhead Pub Ltd., UK, 2008.
07. M.Miyazaki, Y.Oshida, N.Onose; “Dentin bonding systems; Factors affecting bond strength” Chapter 5, in
“Modern Trends in Adhesive Dentistry”, Kuraray CO., Japan, pp.55/73, 1999.
08. Y.Oshida and F.Farzin-Nia; “Chemical Reaction and Oxidation” in “Shape memory alloys for biomedical
applications” ed. by T.Yoneyama and S.Miyazaki, Woodhead Pub., 2008.
09. Y.Oshida and E.B.Tuna; “Science and Technology Integrated Titanium Dental Implant Systems” in
“Advance Biomaterials” ed. by B.Basu, D.S.Katti and A.Kumar, Wiley, 2009; pp. 143-177.
10. Y.Oshida and Y.Guven; Chapter 15 “Biocompatible coatings for metallic biomaterials” in “Surface Coating
and Modification of Metallic Biomaterials”, ed. by Cuie Wen, Woodhead Pub., to be published 2014.
Video Tapes
1990 :Mechanics of Materials and Materials Science - Fundamental of Engineering, video tape for
continuing education, Syracuse University
1990 :Characterization of Interfacial Layers of Biomaterials, video tape for special seminar,
Academy of Shape Memory Materials for Medical Use, Tokyo Japan.
Publications (refereed)
1968
1. T.Nakayama and Y.Oshida; Identification of the Oxide Films on 18-8 Stainless Steel in High Temperature
Water, The Casting Research Lab., Waseda Univ., No.19, pp.39/40.
2. T.Nakayama and Y.Oshida; Identification of the Initial Oxide Films on 18-8 Stainless Steel in High
Temperature Water, Corrosion, 21(10), pp.336/337.
1970
3. T.Nakayama and Y.Oshida; On the Structure of Initial Oxide Films on Stainless Steel in High
Temperature Water and Vapor, Trans. of Japan Inst. of Metals, 11(4), pp. 245/251.
4. T.Nakayama, Y.Oshida and T.Ikezawa; On the Oxide Films Formed on Stainless Steels in Deaerated
High Temperature Water, The Casting Research Lab., Waseda Univ., No.21, pp.9/41.
5. T.Nakayama and Y.Oshida; Effects of Si on the Structures of Oxide Films Formed on Surfaces of
18-8 and 18Cr Stainless Steels in High Temperature Water, Japan Inst. of Metals, 35(4), pp.358/363.
1971
6. T.Nakayama and Y.Oshida; Effects of Surface Working on the Structures of Oxide Films by Wet
Oxidation in Austenitic Stainless Steels, Trans. of Japan Inst. of Metals, 12(3), pp.214/217.
7. T.Nakayama and Y.Oshida; On the Oxide Film Formed on Hydrogen-Absorbed Stainless Steels in High
Temperature Water, Japan Inst. of Metals, 35(8), pp.826/830.
8. Y.Oshida and T.Nakayama; Effects of Plastic Deformation on Structures of the Wet-Oxidized Films on
Stainless Steels, Japan Inst. of Metals, 35(12), pp.1108/1114.
1972
9. Y.Oshida; On the High Temperature Water Corrosion, Materials Science, 12(9), pp.17/25.
1975
10. Y.Oshida and J.Nakamura; On the Abnormal Plastic Phenomena of Thermoplastic Resins, Jour. of Japan
Soc. for Technology of Plasticity, 16(177), pp.928/934.
19
1975
11. Y.Oshida; An Application of Superplasticity to Powder Metallurgy, Jour. of the Japan Soc. of Powder and
Powder Metallurgy, 22(8), pp.147/153.
1976
12. Y.Oshida and S.Takase; On the Solid-State Bonding of Same Materials in Cast Irons, Jour. of Japan Inst. of
Casting Irons, 48(5), pp.273/279.
13. Y.Oshida and S.Takase; Application of Dynamic Superplasticity to Solid-State Bonding of Cast Irons to
Different Ferrous Alloys, Jour. of Japan Inst. of Casting Irons, 48(6), pp.349/354.
1976
14. Y.Oshida and S.Takase; On the Micro-Structures of Superplastic Solid-State Bonded Parts in Cast Irons,
Jour. of Japan Inst. of Casting Irons., 48(12), pp.763/768.
1977
15. Y.Oshida and S.Takase; On the Solid-State Bonding in Cast Irons Using Dynamic Superplastic
Phenomena, Trans.of Japan Inst. of Iron and Steel, 17, pp.506/515.
16. Y.Oshida and S.Takase; On the Solid-Sate Superplastic Bonding in Cast Irons, Proc. of the 45th
International Foundry Congress, Budapest Hungary (Oct.), pp.189/195.
1979
17. V.Weiss, Y.Oshida and A.Wu; Towards Practical Non-Destructive Fatigue Damage Indicators, Fatigue
and Fracture of Engineering Materials and Structures, 1, pp.333/341.
1980
18. V.Weiss, Y.Oshida and A.Wu; A Note on Fatigue Damage Assessment by X-Ray Diffraction
Techniques for a 304 Stainless Steel Specimen, Jour Nondestructive Evaluation, 1(3), pp.207/213.
1982
19. V.Weiss and Y.Oshida; Effects of Load Cycling During Phase Transformations on the Microstructure of
Plain Carbon Steels and Cast Irons, in Superplastic Forming of Structural Alloy, N.E.Paton and
C.H.Hamilton ed. for Int'l Symp. on Superplastic Forming of Structural Alloys, AIME, p.401/405.
1984
20. V.Weiss and Y.Oshida; Fatigue Damage Characterization by X-Ray Diffraction Line Analysis, in book
Fatigue '84", C.J.Beevers ed., EMAS, Cradley Heath, Warley, West Midlands, U.K., 2, pp.1151/1160.
21. Y.Oshida and H.W.Liu; Oxidation and Low Cycle Fatigue Life Prediction, in Proc. of the 3rd Annual
Workshop on Turbine Engine Hot Section Technology (HOST) Project, pp.321/329.
22. H.W.Liu and Y.Oshida; Literature Survey on Oxidation and Fatigue Lives at Elevated Temperatures,
NASA Contractor Report No.174,639, pp.1/49.
1986
23. H.W.Liu and Y.Oshida; Grain Boundary Oxidation and Oxidation Accelerated Fatigue Crack Nucleation
and Propagation, EPRI AP-4477, EPRI, pp.13-1/13-16.
24. V.Weiss and Y.Oshida; Fatigue Damage Characterization by X-Ray Diffraction Line Analysis and
Failure Probability, EPRI AP-4477, EPRI, pp.16-1/16-18.
25. Y.Oshida; Superplasticity - Its Present and Future's Research Activities in America and Europe, Jour. of
Japan Soc. for Technology of Plasticity, 27(302), pp.357/363.
26. Y.Oshida and H.W.Liu; Grain Boundary Oxidation and Oxidation Accelerated Fatigue Crack Nucleation,
Proc. of the 3rd TMF Workshop, NASA Lewis Research Center, pp.34/46.
27. H.W.Liu and Y.Oshida; Grain Boundary Oxidation and Fatigue Crack Growth at Elevated Temperatures,
Theoretical and Applied Fracture Mechanics, 6, pp.85/94.
1987
28. Y.Oshida and H.W.Liu; Grain Boundary Oxide Crack, Oxidation Accelerated Fatigue Crack Growth and
Fatigue Life, the 40th Meeting on Mechanical Failure Prevention Group, Symposium on Use of New
Technology to Improve Mechanical Readiness, Reliability and Maintainability, pp.287/295.
29. Y.Oshida and A.Deguchi; Martensite Formation and its Related Toughness in 304 Stainless Steel During
Low Temperature Fatigue, Fatigue and Fracture of Engineering Materials and Structures, 10(10), p.363/372.
30. Y.Oshida; The Many FACEs of CAFA, Jour. of Metals, 39(10), p.39.
31. Y.Oshida; Putting a New Face on Weather Reports, Weatherwise, 40(6), pp.330/332.
1988
32. Y.Oshida and H.W.Liu; Grain Boundary Oxidation and an Analysis of the Effects of Oxidation on Fatigue
20
Crack Deformation Life, American Society for Testing Materials, STP 942, pp.1199/1217.
1989
33. Y.Oshida and A.Deguchi; Low Temperature Isothermal Strain in a Metastable Austenitic Stainless Steel
Sheet, Jour. of Engineering Materials and Technology, Trans.ASME, 112, pp.362/365.
34. P.C.Chen and Y.Oshida; Residual Stress Analysis of a Multi-Layer Thin Film Structure by Destructive
(Curvature) and Non-Destructive (X-Ray) Methods, Proc. MRS, pp.439/443.
35. Y.Oshida, R.Sachdeva, S.Miyazaki and S.Fukuyo; Biological and Chemical Evaluation of TiNi Alloys,
Materials Science Forum, 56/58, pp.705/710.
36. R.Sachdeva, S.Miyazaki, Y.Oshida and S.Fukuyo; Shape Memory NiTi Alloys - Applications in
Dentistry, Materials Science Forum, 56/58, pp.693/698.
37. Y.Oshida and P.C.Chen; Nondestructive Low-Cycle Fatigue Characterization of Multi-Layer Thin Film
Structures, Jour. of Nondestructive Evaluation, 8(4), pp.235/245.
1990
38. Y.Oshida; Oxide Films Formed on Aluminum-Enriched Surfaces of 304 Stainless Steel in High
Temperature Water Containing Co Ion, Jour. of Materials Science, 25, pp.661/668.
39. Y.Oshida and J.Daly; Fatigue Damage Evaluation of Shot-Peened High Strength Aluminum Alloy, in
Surface Engineering, S.A.Meguid ed., Elsevier Applied Science, London, pp.404/416.
40. Y.Oshida and J.Daly; Effects of Shot Peening on Fatigue-Damaged High Strength Aluminum Alloy Application of Rejuvenation of Fatigue-Damaged Components -, Int'l Conf. on Shot Peening (ICP-4),
pp.317/326.
1991
41. Y.Oshida and P.C.Chen; High- and Low-Cycle Fatigue Damage Evaluation of Multi-Layer Thin Film
Structure, Jour. of Electronic Packaging, ASME, 113, pp.58/62.
42. Y.Oshida and S.Miyazaki; Corrosion and Biocompatibility of Shape Memory Alloys, Materials and
Environment, 40, pp.834/844. (in Japanese)
1992
43. Y.Oshida, R.Sachdeva and S.Miyazaki; Changes in Contact Angles as a Function of Time on Some PreOxidized Bio-Materials, Jour. of Materials Science: Materials in Medicine; 3, pp.306/312.
44. Y.Oshida, T.Seno, T.Nishihara and A.Itoh; Fractal Characterization of Shot-Peened Surfaces, MAT- TEC:
Shot-Peening, ed. by A. Niku-Lari, Institute for Industrial Technology Transfer, pp.253/260.
45. Y.Oshida, R.Sachdeva and S.Miyazaki; Microanalytical Characterization and Surface Modification of
TiNi Orthodontic Archwires, Bio-Medical Materials and Engineering, 2, pp.51/69.
46. R.Sachdeva, Y.Oshida, F.Farzin-Nia, and S.Miyazaki; Systemizing the Use of Superelastic TiNi Orthodontic
Archwires, Proc. ICOMAT-92, pp.295/299.
47. R.Sachdeva, F.Farzin-Niz, Y.Oshida, and S.Miyazaki; Load Deformation Characteristics of TiNi
Orthodontic Archwires Proc. ICOMAT-92, pp.299/303.
48. Y.Oshida, P.C.Chen, J.D.Reid and T.Nishihara; Time-Dependent Ductility of Electrodeposited Copper, J.
Electronic Packaging, ASME., 114, pp.448/454.
1993
49. Y.Oshida, R.Sachdeva and S.Miyazaki; Effects of Shot Peening on Surface Contact Angles of
Biomaterials, Jour. of Materials Science: Materials in Medicine, 4, pp.443/447.
50. Y.Oshida and B.K.Moore; Anodic Polarization Behavior and Microstructure of a Gallium-Based Alloy,
Dental Materials, 9, pp.234/241.
51. S.Miyazaki and Y.Oshida; Chapter 8.3 “Application to Medicine" in "Mechanical Properties of Shape
Memory Alloys@, K.Tanaka et al. ed., Yokenko, pp. 206/222. (in Japanese)
52. Y.Oshida, C.A.Munoz, M.M.Winkler, A.Hashem, and M.Ito; Fractal Dimension Analysis of Aluminum
Oxide Particle for Sandblasting Dental Use, J. Bio-Medical Materials and Engineering, 3 pp.117/126.
53. Y.Oshida and A.Hashem; Titanium-Porcelain System. Part I: Oxidation Kinetics of Nitrided Pure
Titanium, Simulated to Porcelain Firing Process, J. of Bio- Medical Materials and Engineering, 3(4),
pp.185/198.
54. Y.Oshida, A.Hashem, T.Nishihara, and M.V.Yapchulay; Fractal Dimension Analysis of Mandibular
Bones - Toward A Morphological Compatibility Of Implants -, J. of Bio-Medical Materials and Engineering,
4(5), pp.397/407.
1994
21
55. M.Ito, A.Miyazaki, T.Yamagishi, H.Yagasaki, A.Hashem, and Y.Oshida;Experimental Development of A
Chitosan-bonded -Tricalcium Phosphate Bone Paste, J.of Bio-Medical Materials and Engineering, 4(6),
pp.439/449.
1995
56. Y.Oshida, A.Hashem, and R.Elsalawy; Some Mechanistic Observation on Water-Embrittled Dental
Composite Resins, J. of Bio-Medical Materials and Engineering, 5(2), pp.93/115.
57. Y.Oshida, M.Miyazaki, H.Osman, and L.Xirouchaki;Development of Photo-Sensing Bulge Ductility
Tester and Application to Dental Articulating Paper, J. of Bio-Medical Materials and Engineering, 5(2),
pp.125/139.
1996
58. M.Ito. T.Yamagishi, Y.Oshida, and C.A.Munoz; Effect of selected physical properties of waxes on
investments and casting shrinkage, Journal of Prosthetic Dent. 75(2), pp.211/216.
59. M.Miyazaki, Y.Oshida and L.Xirouchaki; Dentin bond system, Part I: Literature Review, J. of BioMedical Materials and Engineering, 6(1), pp.15/31.
60. Y.Oshida and M.Miyazaki; Dentin bonding system. Part II: Effect of crosshead speed, J. of BioMedial Materials and Engineering, 6(2), pp.87/100.
61. M.Miyazaki, Y.Oshida, M.Sugiyama, T.Asano, T.Kawamura and H.Onose; A study on lightcured composite resins - Effect of crosshead speed on tensile bond strength to dentin -, Japan Soc. for
Adhesive Dentistry, 14(3), pp.132/140.
62. T.Deguchi, M.Ito, A.Obata, Y.Koh, T.Yamagishi, and Y.Oshida; Trail production of titanium
orthodontic brackets fabricated by sintering metal injection molding methods, Journal of Dental
Research, 75(7),pp.1491/1496.
63. M.Miyazaki, Y.Oshida, B.K.Moore and H.Onose; Effect of light exposure on fracture toughness
and flexural strength of light-cured composites, Dent Mater, 12(11),pp.328/332.
1997
64. Y.Oshida, L.W.Fung, and S.C.Isikbay; Titanium-Porcelain System. Part II: Bond Strength of Fired
Porcelain on Nitrided Pure Titanium J.of Bio-Medical Materials and Engineering, 7(1), 13/34.
65. E.J.DeSchepper, Y.Oshida, B.K.Moore, N.B.Cook, H.Eggerston; In Vitro Corrosion Behavior and
Microstructure Examination of a Gallium-based Restorative, Operative Dentistry, 22, 209/216.
66. Y.Oshida and A.Zuccari; On three-point flexural tests on dental polymeric resins, J. of Bio-Medical
Materials and Engineering, 7(2), 111/119.
67. J.A.Platt, A.Guzman, A.Zuccari, D.W.Thornburg, B.F.Rhodes, Y.Oshida, B.K.Moore; Corrosion
behavior of 2205 duplex stainless steel, Amer. J. Orthodontics and Dentofacial Orthopedics, 112(7), 69/79.
68. A.Zuccari, Y.Oshida, M.Okamura, C.Y.Paez and B.K.Moore; Bulge ductility of several occlusal contact
measuring paper-based and plastic-based sheets J. of Bio-Medical Materials and Engineering. 7(4), 265270.
69. A.Zuccari, Y.Oshida, B.K.Moore; Reinforcement of acrylic resins for provisional fixed restorations. Part I:
Mechanical properties, J. of Bio-Medical Materials and Engineering. 7(5), 327/344.
70. A.Zuccari, Y.Oshida, M.Miyazaki, K.Fukuishi, B.K.Moore, and H.Onose; Reinforcement of acrylic resins
for provisional fixed restorations. Part II: Physical properties, J. of Bio-Medical Materials and Engineering.
7(5), 345/355.
1998
71. F.J.Torres, W.Panyayong, W.Rogers, D.Velasquez-Plata, Y.Oshida and B.K.Moore; Corrosion behavior of
sensitized duplex stainless steel, Bio-Medical Materials and Engineering, 8(1), 25/36.
1999
72. Y.Oshida and J.Gorthy, Water-sorption kinetics of dental polymeric resin under tensile stressing conditions,
Bio-Medial Materials and Engineering, 9, 125-133.
73.Y.J.Lim, M.Reys, S.Thongthammachat, K.Sukchit, M.Panich, and Y.Oshida, Corrosion behavior in dualphase stainless steels - Effect of alpha/gamma phase ratio –, Bio-Medical Materials and Engineering, 9, 277283.
2001
74. C.Kuphasuk, Y.Oshida, C.J.Andres, S.T.Hovijitra, M.T.Barco, and D.T.Brown; Electrochemical corrosion
behaviors of titanium and titanium-based alloys, J Prosthet Dent, 85, 195-202.
75. M.J.D.Reyes, Y.Oshida, C.J.Andres, T.Barco, S.Hovijitra, and D.Brown; Titanium Porcelain System. Part
22
III. Effects of Surface Modification on Bonded Strengths, Bio-Med Materials and Engineering, 11, 117-136.
76. Y.Oshida and M.J.D.Reyes; Titanium Porcelain System. Part IV. Some Mechanistic Consideration on Bond
Strengths, Bio-Med Materials and Engineering, 11, 137-142.
77. Y.J.Lim, Y.Oshida, T.Barco, and C.J.Andres, Surface characterization of variously treated titanium
materials, International Journal of Oral & Maxillofacial Implants, 16, 333-342.
78. S. Nagasawa, T.Yoshida, H.Mizoguchi, M.Ito, and Y.Oshida; Porcelain-Metal Bonding: Part I: Effects of
Repeated Baking Process, Journal of Bio-Med Mat and Eng, 11, 185-195.
79. Y.J.Lim and Y.Oshida; Initial Contact Angle Measurements on Variously Treated Dental/Medical Titanium
Materials, Journal of Bio-Med Mat and Eng, 11, 325-341.
80. B.Enz, Y.Oshida, D.Head, J.E.Tomassoni, and A.Sances; Mathematical Approach to Side Underride
Vehicular Accidents, Math Modelling and Sci Comput., 13, 136-151.
2002
81. M.Ito, A.Kuroiwa, S.Nagasawa, T.Yoshida, H.Yagasaki, and Y.Oshida; Effect of wax melting range and
investing liquid concentration on the accuracy of a three-quarter crown casting, J Prosthet Dent., 87, 57/61.
82. D.Velasquez-Plata, J.Lutonsky, Y.Oshida and R.Jones; A Close-up Look at an Implant Fracture: A Case
Report, The Int’l J of Period and Resto Dent 22, 483-491.
83. W.Panyayong, Y.Oshida, C.J.Andres, T.M.Barco, D.T.Brown, and S.Hovijitra; Reinforcement of acrylic
resins for provisional fixed restorations Part III: effects of addition of titania and zirconia mixtures on some
mechanical and physical properties, Bio-Med Mat and Eng., 12, 353-366.
84. Y.Oshida; Overview: Titanium Materials for Dental and Medical Uses, Mater.Trans. Special Issue on
Biomaterials and Bioengineering, 43(10).
85. Y.Oshida, I.Garcia, C.Kuphasuk, J-C.Chang, W.Lim, S.Al-Ali, Il-W.Koh, K.Mirza, M.Ito, and
S.Nagasawa; Corrosion Behaviors of Titanium Materials under Various Conditions, Mater. Trans. Special
Issue on Biomaterials and Bioengineering, 43(10).
2003
86. J.B.Almeida, J.A.Platt, Y.Oshida, B.K.Moore, M.A.Cochran ,and G.Eckert; Three Different Methods to
Evaluate Microleakage of Packable Composites in Class II Restorations, Oper Dent, 28, 453-460.
87. Jui-Chung Chang, Y.Oshida, R.L.Gregory, C.J.Andres, T.M.Barco and D.Brown; Electrochemical study on
microbiology-related corrosion of metallic materials, Bio-Med Mater and Engineering, 13, 281-295.
88. M.Ito, S.Nagasawa, T.Yoshida, K.Kamijo, Z.Khabbaz, Y.Oshida; Cement Bond Strengths of Titanium
Plates, Bio-Medical Materials and Engineering, 13, 261-269.
89. S.Nagasawa, T.Yoshida, T.Mizoguchi, N.Terashima, M.Ito, J.A.Platt and Y.Oshida; High Temperature
Characteristics and Solidification Microstructures of Dental Metallic Materials; Part I: Gold-SilverPalladium Alloy, Dental Materials Journal, 22(3), 227-243.
2004
90. K.T.Chu, Y.Oshida, E.B.Hancock, M.J.Kowolik, T.Barco, S.L.Zunt; Hydroxyapatite/PMMA Composite
as Bone Cements, Bio-Medical Materials and Engineering., 14, 87-105.
91. E.P.Hernandez, Y.Oshida, J.A.Platt, C.J.Andres, M.T.Barco, D.T.Brown; Mechanical properties of four
methylmethacrylate-based resins for provisional fixed restorations, Bio-Medical Materials and Engineering,
14, 107-122.
92. S.Nagasawa, T.Yoshida, N.Terashima, T.Mizoguchi, H.Yagasaki, K.Kamijo, M.Ito, J.A.Platt, and
Y.Oshida; High Temperature Characteristics and Solidification Microstructures of Dental Metallic
Materials. Part II. ADAS Type 3 Gold Alloy, Dental Materials Journal, 23(2), 81-88.
93. S.Nagasawa, T.Yoshida, T.Mizoguchi, N.Terashima, K.Kamijyo, M.Ito, and Y.Oshida; Effects of repeated
baking on the mechanical and physical properties of metal-ceramic systems. Dental Mater J, 23(2), 136-145.
2005
94. Y.Oshida, C.B.Sellers, K.Mirza, and F.Farzin-Nia: “Corrosion of dental metallic materials by dental
treatment agents”, Mater Sci and Eng: C, 25(3), 343-348.
95. Z.K.Hashemi, Y.Oshida, J.J.Deely, and Y. Ki; Ca/P Mol Ratio of Caries-Affected Dentin Structures, BioMedical Mater and Eng. 15(4), 251-260.
96. S.Al-Ali, Y.Oshida, C.J.Andres, M.T.Barco, D.T.Brown, S.Hovijitra, M.Ito, S.Nagasawa, and T.Yoshida,
Effects of Coupling Methods on Galvanic Corrosion Behavior of Commercially Pure Titanium with Dental
Precious Alloys. Bio-Med Mater and Eng. 15(4), 307-316.
23
97. T.Yoshida, N.Terashima, T.Niiro, S.Nagasawa, M.Ito, H.Yagasaki, Y.Oshida, P.Agarwal. Bond strength of
resin cements to H2O2-treated titanium plates. Dental Materials 21(12), 1087-1097.
2006
98. B.Wadagaonlkar, S.Ito, N.Svizero, D.Elrod, S.Foulger, R.Rodgers, Y.Oshida, K.Kirkland, J.Sword,
F.Rueggeberg, F.Tay, and D.Pashley. Evaluation of the effect of water-uptake on the impedance of dental
resins. Biomaterials 27(17), 3287-3294.
99. D.Carr, Y.Oshida, C.J.Andres, T.M.Barco and J.A.Platt; The effect of fatigue damage on the force required
to remove a restoration in cement-retained Cera-One implant system. Journal of Prosthodontics 15, 289-294.
100. K.Choi, Y.Oshida, J.A.Platt, M.A.Cochran, B.A.Matis, K.Yi; Microtensile bond strength of glass ionomer
cements to artificially created carious dentin. Operative Dent 31(5), 590-597.
2008
101. C.N.Elias, Y.Oshida, J.H.C.Lima, C.A.Muller; “Relationship between surface properties (roughness,
wettability and morphology) of titanium and dental implant torque”, J Mechanical Behavior of Biomedical
Mater, 1(3), 234-242.
2010
102. Y.Oshida, E.B.Tuna, O.Aktoren, K.Gencay; “Dental Implant Systems” Int. J. Mol. Sci., 11(4), 1580-1678.
103. E.B. Tuna, O. Aktoren, Y. Oshida, K. Gencay; “Elution of residual monomers from dental composite
materials, European J of Paediatric Dent, 11(3), 110-114.
Science Citation Index*
1969(2), 1970(3), 1971(0), 1972(4), 1973(6), 1974(3), 1975(8), 1976(0), 1977(2), 1978(8), 1979(3), 1980(2),
1981(0), 1982(4), 1983(4), 1984(3), 1985(5), 1986(6), 1987(2), 1988(1), 1989(5), 1990(4), 1991(2), 1992(3),
1993(2), 1994(3), 1995(8), 1996(8), 1997(9), 1998(5), 1999(6), 2000(9), 2001(6), 2002(9), 2003(12), 2004(18),
2005(22), 2006 (12 ), 2007(22 ), 2008 (18), 2009 (33), 2010 (34), 2011 (49), 2012 (57), 2013 (77), 2014 ( ),
2015 ( ), 2016 ( )
* SCI is an alphabetic list of references given in bibliographies and footnotes of source articles arranged by the
first author. SCI is a calendar-year index to scientific literature published by the Institute for Scientific
Information, Inc. The number listed in the above (n) indicates the total numbers of my articles (in which my name
is listed as the first author) being cited by other author(s) in that year.
Awarded Patents (US Patents only)
Yoshiki Oshida, and Rochit C.L.Sachdeva; “Orthodontic Bracket” (US Patent 5,232,361, Aug. 3, 1993)
Yoshiki Oshida, Farrokh Farzin-Nia, and Rochit C.L.Sachdeva; “Insert For Reinforcing An Orthodontic
Appliance And Method Of Making Same” (US Patent 5,816,801, Oct. 6, 1998).
Yoshiki Oshida and Masayoshi Usui; “Dental Mirror” (US Patent 5,655,904, Aug. 12, 1997)
Yoshiki Oshida, Masayoshi Usui, and Seiichi Hata; “Mirror For Dental Examination” (US Patent 5,741,132,
Apr. 21, 1998).
Yoshiki Oshida; “Orthopedic Implant System” (US Patent 6,066,176, May 23, 2000).
Yoshiki Oshida, “Orthopedic Implant System” (US Patent 6,312,473 B1, Feb. 6, 2001).
Yoshiki Oshida; “Titanium Materials Implants” (US Patent 6,183,255 B1, Feb. 6, 2001).
Yoshiki Oshida and Martin Thomas Barco II; “Superplastically-Formed Prosthetic Components, And Equipment
24
For Same” (US Patent 6,116,070, Sep. 12, 2000).
Yoshiki Oshida, “Mirror” (US 6,575,744 B1, Jun 10, 2003).
Yoshiki Oshida, “Dental And Medical Cement” (US 6,860,932 B2, March 1, 2005).
25