Download Lecture 7 Power Consumption in CMOS Circuits and Low Power

ELEC 5970-003/6970-003 (Fall 2004)
Advanced Topics in Electrical Engineering
Designing VLSI for Low-Power and Self-Test
Power Consumption in a CMOS Circuit
Vishwani D. Agrawal
James J. Danaher Professor
Department of Electrical and Computer Engineering
Auburn University
http://www.eng.auburn.edu/~vagrawal
[email protected]
9/23-30/04
ELEC 5970-003/6970-003
1
Motivation
• Low power applications
– Remote systems (e.g., satellite)
– Portable systems (e.g., mobile phone)
• Methods of low power design
– Reduced supply voltage
– Adiabatic switching
– Clock suppression
– Logic design for reduced activity
– Reduce Hazards (40% in arithmetic logic)
– Software techniques
• Reference: Chandrakasan and Brodersen
9/23-30/04
ELEC 5970-003/6970-003
2
Low-Power Design
• Design practices that reduce power
consumption at least by one order of
magnitude; in practice 50% reduction is
often acceptable.
• General topics
– High-level and software techniques
– Gate and circuit-level methods
– Power estimation techniques
– Test power
9/23-30/04
ELEC 5970-003/6970-003
3
VLSI Chip Power Density
Source: Intel
Sun’s
Surface
Power Density (W/cm2)
10000
Rocket
Nozzle
1000
Nuclear
Reactor
100
8086
Hot Plate
10 4004
8008 8085
386
286
8080
1
1970
9/23-30/04
1980
P6
Pentium®
486
1990
Year
2000
ELEC 5970-003/6970-003
2010
4
Specific Topics on Low-Power
•
•
•
•
•
Power dissipation in CMOS circuits
Low-power CMOS technologies
Dynamic reduction techniques
Leakage power
Power estimation
9/23-30/04
ELEC 5970-003/6970-003
5
Components of Power
• Dynamic
– Signal transitions
• Logic activity
• Glitches
– Short-circuit
• Static
– Leakage
9/23-30/04
ELEC 5970-003/6970-003
6
Power of a Transition
isc
R
VDD
Power
Vo
Vi
CL
R
= CLVDD2/2
+ Psc
Ground
9/23-30/04
ELEC 5970-003/6970-003
7
Short Circuit Current, isc(t)
VDD
VDD - VTp
Vi(t)
Volt
Vo(t)
VTn
0
45μA
Iscmaxr
isc(t)
Amp
0
9/23-30/04
tB
tE
ELEC 5970-003/6970-003
1
Time (ns)
8
Peak Short Circuit Current
• Increases with the size (or gain, β) of
transistors
• Decreases with load capacitance, CL
• Largest when CL= 0
• Reference: M. A. Ortega and J. Figueras,
“Short Circuit Power Modeling in
Submicron CMOS,” PATMOS’96, Aug.
1996, pp. 147-166.
9/23-30/04
ELEC 5970-003/6970-003
9
Short-Circuit Energy per Transition
• Escr=∫
tE
tB
VDD isc(t)dt = (tE – tB) IscmaxrVDD/2
• Escr = tr (VDD+ VTp-VTn) Iscmaxr/2
• Escf = tf (VDD+ VTp-VTn) Iscmaxf/2
• Escf = 0, when VDD = |VTp| + VTn
9/23-30/04
ELEC 5970-003/6970-003
10
Short-Circuit Energy
• Increases with rise and fall times of input
• Decreases for larger output load
capacitance
• Decreases and eventually becomes zero
when VDD is scaled down but the
threshold voltages are not scaled down
9/23-30/04
ELEC 5970-003/6970-003
11
Short-Circuit Power Calculation
• Assume equal rise and fall times
• Model input-output capacitive coupling
(Miller capacitance)
• Use a spice model for transistors
– T. Sakurai and A. Newton, “Alpha-power Law
MOSFET model and Its Application to a
CMOS Inverter,” IEEE J. Solid State Circuits,
vol. 25, April 1990, pp. 584-594.
9/23-30/04
ELEC 5970-003/6970-003
12
Psc vs. C
0.7μ CMOS
45%
Psc/Ptotal
3ns
0%
35
9/23-30/04
Input rise time
0.5ns
C (fF)
ELEC 5970-003/6970-003
75
13
Technology Scaling
• Scale down by factors of 2 and 4, i.e.,
model 0.7, 0.35 and 0.17 micron
technologies
• Constant electric field assumed
• Capacitance scaled down by the
technology scale down factor
9/23-30/04
ELEC 5970-003/6970-003
14
Technology Scaling Results
L=0.17μ, C=10fF
Psc/Ptotal
70%
L=0.35μ, C=20fF
10%
L=0.7μ, C=40fF
0%
0.4
9/23-30/04
tr (ns)
ELEC 5970-003/6970-003
1.6
15
Effects of Scaling Down
•
•
•
•
1-16% short-circuit power at 0.7 micron
4-37% at 0.35 micron
12-60% at 0.17 micron
Reference: S. R. Vemuru and N.
Steinberg, “Short Circuit Power Dissipation
Estimation for CMOS Logic Gates,” IEEE
Trans. on Circuits and Systems I, vol. 41,
Nov. 1994, pp. 762-765.
9/23-30/04
ELEC 5970-003/6970-003
16
Summary: Short-Circuit Power
• Short-circuit power is consumed by each
transition (increases with input transition time).
• Reduction requires that gate output transition
should not be slower than the input transition
(faster gates can consume more short-circuit
power).
• Scaling down of supply voltage with respect to
threshold voltages reduces short-circuit power.
9/23-30/04
ELEC 5970-003/6970-003
17
Components of Power
• Dynamic
– Signal transitions
• Logic activity
• Glitches
– Short-circuit
• Static
– Leakage
9/23-30/04
ELEC 5970-003/6970-003
18
Leakage Power
IG
Ground
VDD
R
n+
Isub
IPT
IGIDL
9/23-30/04
ELEC 5970-003/6970-003
n+
ID
19
Leakage Current Components
• Subthreshold conduction, Isub
• Reverse bias pn junction conduction, ID
• Gate induced drain leakage, IGIDL due to
tunneling at the gate-drain overlap
• Drain source punchthrough, IPT due to
short channel and high drain-source
voltage
• Gate tunneling, IG through thin oxide
9/23-30/04
ELEC 5970-003/6970-003
20
Subthreshold Current
Isub = μ0 Cox (W/L) Vt2 exp{(VGS-VTH)/nVt}
μ0: carrier surface mobility
Cox: gate oxide capacitance per unit area
L: channel length
W: gate width
Vt = kT/q: thermal voltage
n: a technology parameter
9/23-30/04
ELEC 5970-003/6970-003
21
IDS for Short Channel Device
Isub = μ0 Cox (W/L) Vt2 exp{(VGS-VTH+ηVDS)/nVt}
VDS = drain to source voltage
η: a proportionality factor
9/23-30/04
ELEC 5970-003/6970-003
22
Increased Subthreshold Leakage
Scaled device
Log Isub
Ic
0 VTH’ VTH
9/23-30/04
ELEC 5970-003/6970-003
Gate voltage
23
Summary: Leakage Power
• Leakage power as a fraction of the total power
increases as clock frequency drops. Turning
supply off in unused parts can save power.
• For a gate it is a small fraction of the total power;
it can be significant for very large circuits.
• Scaling down features requires lowering the
threshold voltage, which increases leakage
power; roughly doubles with each shrinking.
• Multiple-threshold devices are used to reduce
leakage power.
9/23-30/04
ELEC 5970-003/6970-003
24
Components of Power
• Dynamic
– Signal transitions
• Logic activity
• Glitches
– Short-circuit
• Static
– Leakage
9/23-30/04
ELEC 5970-003/6970-003
25
Power of a Transition
isc
R
VDD
Power
Vo
Vi
CL
R
= CLVDD2/2
+ Psc
Ground
9/23-30/04
ELEC 5970-003/6970-003
26
Dynamic Power
• Each transition of a gate consumes CV2/2.
• Methods of power saving:
– Minimize load capacitances
• Transistor sizing
• Library-based gate selection
– Reduce transitions
• Logic design
• Glitch reduction
9/23-30/04
ELEC 5970-003/6970-003
27
Glitch Power Reduction
• Design a digital circuit for minimum
transient energy consumption by
eliminating hazards
9/23-30/04
ELEC 5970-003/6970-003
28
Theorem 1
• For correct operation with minimum
energy consumption, a Boolean gate
must produce no more than one
event per transition
9/23-30/04
ELEC 5970-003/6970-003
29
Theorem 2
• Given that events occur at the input of a
gate (inertial delay = d ) at times t1 < . .
. < tn , the number of events at the gate
output cannot exceed
tn – t1
min ( n , 1 + -------d
)
tn - t1
t1
9/23-30/04
t2
t3
ELEC 5970-003/6970-003
tn
time
30
Minimum Transient Design
• Minimum transient energy condition for
a Boolean gate:
| t i - tj | <
d
Where ti and tj are arrival times of input
events and d is the inertial delay of gate
9/23-30/04
ELEC 5970-003/6970-003
31
Balanced Delay Method
• All input events arrive simultaneously
• Overall circuit delay not increased
• Delay buffers may have to be inserted
4?
1
1
1
1
1
1
1
3
1
9/23-30/04
1
1
ELEC 5970-003/6970-003
32
Hazard Filter Method
• Gate delay is made greater than maximum input
path delay difference
• No delay buffers needed (least transient energy)
• Overall circuit delay may increase
2
1
1
1
1
1?
3?
1
9/23-30/04
1
1
1
ELEC 5970-003/6970-003
2
33
Linear Program
• Variables: gate and buffer delays
• Objective: minimize number of
buffers
• Subject to: overall circuit delay
• Subject to: minimum transient
condition for multi-input gates
• AMPL, MINOS 5.5 (Fourer, Gay and
Kernighan)
9/23-30/04
ELEC 5970-003/6970-003
34
Variables: Full Adder add1b
0
0
0
0
0
1
1
1
0
0
1
0
0
0
1
1
1
0
0
9/23-30/04
1
0
ELEC 5970-003/6970-003
1
35
Objective Function
• Ideal: minimize the number of non-zero
delay buffers
• Actual: sum of buffer delays
9/23-30/04
ELEC 5970-003/6970-003
36
Specify Critical Path Delay
0
0
0
0
0
1
1
1
0
0
1
0
0
0
1
1
1
1
0
0
0
1
Sum of delays on critical path ≤ maxdel
9/23-30/04
ELEC 5970-003/6970-003
37
Multi-Input Gate Condition
d1
0
0
0
1
d
d
1
0
0
1
0
1
d1 - d2 ≤ d
d2 - d1 ≤ d
9/23-30/04
ELEC 5970-003/6970-003
d
d2
38
AMPL Solution: maxdel = 6
1
2
1
1
1
2
1
1
1
2
2
9/23-30/04
ELEC 5970-003/6970-003
39
AMPL Solution: maxdel = 7
3
1
1
1
2
1
1
2
1
2
9/23-30/04
ELEC 5970-003/6970-003
40
AMPL Solution: maxdel ≥ 11
5
1
1
1
2
3
1
3
4
9/23-30/04
ELEC 5970-003/6970-003
41
Power Estimates for add1b
Power* with respect to Ref.
No.
maxdel
of
Ref: model del.
Ref: unit del.
buf.
Peak
Ave.
Peak
Ave.
6
2
0.60
0.89
0.60
0.90
7
1
0.56
0.85
0.56
0.86
≥11
0
0.52
0.80
0.52
0.81
* Hsiao et al., ICCAD-97
9/23-30/04
ELEC 5970-003/6970-003
42
VDD
Open at t = 0
Large C
V
Circuit
Energy, E(t)
Power Calculation in Spice
Ground
t
1
1
2
E(t) = -- C VDD - -- C V 2 ~ C VDD ( VDD - V )
2
2
Ref.: M. Shoji, CMOS Digital Circuit Technology, Prentice Hall, 1988, p. 172.
9/23-30/04
ELEC 5970-003/6970-003
43
Power Dissipation of ALU4
Energy in nanojoules
7
1 micron CMOS, 57 gates, 14 PI, 8 PO
100 random vectors simulated in Spice
6
5
Original ALU
delay ~ 3.5ns
4
3
Minimum energy ALU
delay ~ 10ns
2
1
0
0.0
0.5
1.0
1.5
2.0
microseconds
9/23-30/04
ELEC 5970-003/6970-003
44
Signal Amplitude, Volts
F0 Output of ALU4
Original ALU, delay = 7 units (~3.5ns)
5
0
Minimum energy ALU, delay = 21 units (~10ns)
5
0
0
40
80
120
160
nanoseconds
9/23-30/04
ELEC 5970-003/6970-003
45
References
• E. Jacobs and M. Berkelaar, “Using Gate Sizing to Reduce
Glitch Power,” Proc. ProRISC/IEEE Workshop on Circuits,
Systems and Signal Processing, Nov. 1996, pp. 183-188;
also Int. Workshop on Logic Synthesis, May 1997.
• V. D. Agrawal, “Low-Power Design by Hazard Filtering,”
Proc. 10th Int. Conf. VLSI Design, Jan. 1997, pp. 193-197.
• V. D. Agrawal, M. L. Bushnell, G. Parthasarathy, and R.
Ramadoss, “Digital Circuit Design for Minimum Transient
Energy and a Linear Programming Method,” Proc. 12th Int.
Conf. VLSI Design, Jan. 1999, pp. 434-439.
• Last two papers are available at website
http://www.eng.auburn.edu/~vagrawal
9/23-30/04
ELEC 5970-003/6970-003
46
A Limitation
• Constraints are written by path
enumeration.
• Since number of paths in a circuit can be
exponential in circuit size, the formulation
is infeasible for large circuits.
• Example: c880 has 6.96M constraints.
9/23-30/04
ELEC 5970-003/6970-003
47
Timing Window
• Define two timing window variables per gate
output:
– ti Earliest time of signal transition at gate i.
– Ti Latest time of signal transition at gate i.
t1, T1
.
.
.
ti, Ti
i
tn, Tn
Ref: T. Raja, Master’s Thesis, Rutgers Univ., 2002
9/23-30/04
ELEC 5970-003/6970-003
48
Linear Program
• Gate variables d4 . . . d12
• Buffer Variables d15 . . . d29
• Corresponding window variables t4 . . . t29 and T4 . . .
T29.
9/23-30/04
ELEC 5970-003/6970-003
49
Multiple-Input Gate Constraints
For Gate 7:
T7 > T5 + d7;
T7 > T6 + d7;
9/23-30/04
t7 < t 5 + d 7;
t7 < t6 + d 7;
ELEC 5970-003/6970-003
d7 > T7 - t7;
50
Single-Input Gate Constraints
Buffer 19:
T16 + d19 = T19 ;
t16 + d19 = t19 ;
9/23-30/04
ELEC 5970-003/6970-003
51
Overall Delay Constraints
T11 < maxdelay
T12 < maxdelay
9/23-30/04
ELEC 5970-003/6970-003
52
Advantage of Timing Window
• Path constraints (exponential in n):
2 × 2 × … 2 = 2n paths between I/O pair
• A single variable specifies I/O delay. Total variables,
O(n).
• LP constraint set is linear in the size of circuit.
9/23-30/04
ELEC 5970-003/6970-003
53
Number of constraints
Comparison of Constraints
Number of gates in circuit
9/23-30/04
ELEC 5970-003/6970-003
54
Results: 1-Bit Adder
9/23-30/04
ELEC 5970-003/6970-003
55
Estimation of Power
• Circuit is simulated by an event-driven
simulator for both optimized and unoptimized gate delays.
• All transitions at a gate are counted as
Events[gate].
• Power consumed  Events[gate] x # of
fanouts.
• Ref: “Effects of delay model on peak
power estimation of VLSI circuits,” Hsiao,
et al. (ICCAD`97).
9/23-30/04
ELEC 5970-003/6970-003
56
Color codes for number of transitions
Original 1-Bit Adder
9/23-30/04
ELEC 5970-003/6970-003
57
Color codes for number of transitions
Optimized 1-Bit Adder
9/23-30/04
ELEC 5970-003/6970-003
58
Results: 1-Bit Adder
Simulated over all possible vector transitions
•Average power = optimized/unit delay
= 244 / 308 = 0.792
•Peak power
= optimized/unit delay
= 6 / 10 = 0.60
Power Savings :
Peak
= 40 %
Average = 21 %
9/23-30/04
ELEC 5970-003/6970-003
59
Results: 4-Bit ALU
maxdelay
Buffers inserted
7
10
12
15
5
2
1
0
Power Savings :
Peak = 33 %, Average = 21 %
9/23-30/04
ELEC 5970-003/6970-003
60
Benchmark Circuits
Circuit
Maxdel.
(gates)
No. of
Buffers
C432
17
34
95
66
0.72
0.62
0.67
0.60
C880
24
48
62
34
0.68
0.68
0.54
0.52
C6288
47
94
294
120
0.40
0.36
0.36
0.34
c7552
43
86
366
111
0.38
0.36
0.34
0.32
9/23-30/04
Normalized Power
Average
Peak
ELEC 5970-003/6970-003
61
Physical Design
Gate
Gate
Gate
l/w
l/w
l/w
Gate
l/w
Gate delay modeled as a linear function of gate size, total load capacitance,
and fanout gate sizes (Berkelaar and Jacobs, 1996).
Layout circuit with some nominal gate sizes.
Enter extracted routing delays in LP as constants and solve for gate delays.
Change gate sizes as determined from a linear system of equations.
Iterate if routing delays change.
9/23-30/04
ELEC 5970-003/6970-003
62
Power Dissipation of ALU4
9/23-30/04
ELEC 5970-003/6970-003
63
References
• R. Fourer, D. M. Gay and B. W. Kernighan, AMPL: A Modeling Language
for Mathematical Programming, South San Francisco: The Scientific
Press, 1993.
• M. Berkelaar and E. Jacobs, “Using Gate Sizing to Reduce Glitch
Power,” Proc. ProRISC Workshop, Mierlo, The Netherlands, Nov. 1996,
pp. 183-188.
• V. D. Agrawal, “Low Power Design by Hazard Filtering,” Proc. 10th Int’l
Conf. VLSI Design, Jan. 1997, pp. 193-197.
• V. D. Agrawal, M. L. Bushnell, G. Parthasarathy and R. Ramadoss,
“Digital Circuit Design for Minimum Transient Energy and Linear
Programming Method,” Proc. 12th Int’l Conf. VLSI Design, Jan. 1999, pp.
434-439.
• M. Hsiao, E. M. Rudnick and J. H. Patel, “Effects of Delay Model in Peak
Power Estimation of VLSI Circuits,” Proc. ICCAD, Nov. 1997, pp. 45-51.
• T. Raja, A Reduced Constraint Set Linear Program for Low Power
Design of Digital Circuits, Master’s Thesis, Rutgers Univ., New Jersey,
2002.
9/23-30/04
ELEC 5970-003/6970-003
64
Conclusion
• Glitch-free design through LP: constraint-set is linear in the size of the
circuit.
• LP solution:
– Eliminates glitches at all gate outputs,
– Holds I/O delay within specification, and
– Combines path-balancing and hazard-filtering to minimize the number
of delay buffers.
• Linear constraint set LP produces results exactly identical to the LP
requiring exponential constraint-set.
• Results show peak power savings up to 68% and average power savings
up to 64%.
9/23-30/04
ELEC 5970-003/6970-003
65