Download motwane dm-6k1 digital multimeter

Electricals Electronics Enterprises,
India.
MOTWANE DM-6K1 DIGITAL MULTIMETER
Features:
• 6000 Count LCD display with
pleasant blue backlit.
• Auto ranging.
• 15 mintues Auto power off
facility to save battery life.
• 60 Position Analog bargraph for
trend indication.
• Highly linear Readings.
• Min, Max Data and range hold,
Relative measurement facility
• Capacitance, diode and
continuity < 30Ohms
• Selectable Frequency and Duty
cycle measurement.
• Selectable Centigrade and
Fahrenheit readout Temperature
measurement.
• Polycarbonatge, Ruggged, dust
proof and fire retardant case for
high temperature endurance.
• CE and EN 61010-1 CAT IV-for
enchanced safety in Indoor use.
© www.measurecurrent.in.
Electricals Electronics Enterprises,
India.
TECHNICAL SPECIFICATION.
DC Voltage.
Range
Resolution
Max.Reading
Accuracy
600mV
0.1mV
599.9mV
±(0.5% +3 dgts)
6V
1.0mV
5.999V
±(0.5% +3 dgts)
60V
10mV
59.99V
±(0.5% +3 dgts)
600V
100mV
599.9V
±(0.5% +3 dgts)
1000V
1.0V
1000V
±(0.8% +3 dgts)
* Input impedance: 10M ohms approx.
AC Voltage ( 50Hz to 500Hz) Only sine wave ( Average)
Range
Resolution
Max.Reading
Accuracy
6V
1mV
5.999V
±(1.0% +3 dgts)
60V
10mV
59.99V
±(1.0% +3 dgts)
600V
100mV
599.9V
±(1.0% +3 dgts)
750V
1V
750V
±(1.0% +8 dgts)
* Input impedance: 10M ohms shunted by 30pF approx.
OHMS Range.
Range
Resolution
Max.Reading
Accuracy
600Ω
0.1 Ω
599.9Ω
±(0.5% +3 dgts)
6 KΩ
1.0Ω
5.999KΩ
±(0.5% +3 dgts)
60 KΩ
10Ω
59.99KΩ
±(0.5% +3 dgts)
600 KΩ
100Ω
599.9KΩ
±(0.5% +3 dgts)
6MΩ
1.KΩ
5.999MΩ
±(1.0% +3 dgts)
60 MΩ
10KΩ
59.99MΩ
±(3.0% +3 dgts)
Note: Open circuit voltage on all OHM ranges are 0.6V DC approx
DC Current Range.
Range
Resolution
Max.Reading
Accuracy
60mA
0.01mA
59.99mA
±(1% +3 dgts)
600mA
0.1mA
599.9mA
±(1% +3 dgts)
6A
1mA
5.999A
±(1% +3 dgts)
20A
10mA
20.00A
±(1.2% +3 dgts)
AC Current Range ( 50Hz to 500Hz) Only Sine Wave ( Average)
Range
Resolution
Max.Reading
Accuracy
60mA
0.01mA
59.99mA
±(1.2% +5dgts)
±(1.2% +5dgts)
600mA
0.1mA
599.9mA
±(1.2% +5dgts)
6A
1mA
5.999A
±(1.5% +5dgts)
20A
10mA
20.00A
Capacitance Ranges.
Range
Resolution
Max.Reading
Accuracy
40nF
0.01nF
39.99nF
±(3.0% +10 dgts)
400nF
0.1nF
399.9nF
±(3.0% +10 dgts)
4µF
1nF
3.999µF
±(3.0% +10 dgts)
40µF
10nF
39.99µF
±(3.0% +10 dgts)
400µF
100nF
399.9µF
±(3.0% +10 dgts)
4000µF
1µF
3999.9µF
±(3.0% +10 dgts)
Frequency Ranges.
Range
Resolution
Max. Reading.
Accuracy
10 Hz.
0.0001Hz
9.999Hz
100 Hz.
0.01Hz.
99.99Hz
±(0.1% +3 dgts)
1 KHz
0.1Hz
999.9 KHz.
10 KHz
1.0Hz
9.999KHz
© www.measurecurrent.in.
Overload Protection.
1050 DC/AC RMS
Overload Protection
1050 DC/AC RMS
Overload Protection.
440V DC/AC rms
Overload Protection.
0.8A DC/AC Fuse
Protection.
20A/600V fuse
Protection.
Overload Protection
0.8A DC/AC Fuse
Protection.
20A/600V fuse
Protection.
Overload Protection.
440V DC/AC RMS
Overload Protection.
440V DC/AC RMS
Electricals Electronics Enterprises,
India.
100 KHz
10 Hz
99.99KHz
1000 KHz
100 Hz.
999.9 KHz
10 MHz
1KHz
9.999 MHz
Accuracy is specified at <20 VA rms
Sensivity: 10Hz to 100KHz > 50mVrms, 1000 KHz to 10MHz > 50Vrms.
Diode Test
DIODE TEST.
Open Circuit voltage
Test Current.
≤ 2.0VDC
0.8mA approx.
Continuity Test
Range:
Gives audible beep when resistor is below 30Ω
Temperature (K-Type Thermocouple Optional)
-20˚C to 300˚C
±(2% +3 C)
-4˚F to 572˚F
±(2% + C)
General.
Display
Polarity
Sensing
Dimension
Weight
Standard Accessories
6000 Counts LCD display with blue backlit.
Automatic
Average sensing calibrated for RMS
94(L) x 36(W)x 205(H)mm Approx.
250Grams.
Pair of leads, User manual, Battery Installed,, Carrying
Case,
Pair of leads, K-type Thermocouple.
Optional Accessories.
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Power
Power Supply
Power Consumption
Auto Power OFF
0 to 50C
-20 to 60C
80% at 5C to 31C, 50% at 31C to 40C non-condensing.
1.5V AAA size X2.
3.2mA Typical
15 minutes idle sleep mode consumption 10 Microamp.
Approx.
Over Load Protection.
Fuse Protection for mA input Terminal
0.8A/600V fast blow type ceramic fuse.
Fuse Protection for 20A Input Terminal
20A/600V fast blow type ceramic fuse
V/Ohms/D/Con
440V DC/AC RMS
Safety
Transient Protection
8kV(1.2/50uS Surge) as per IEC 1010.92
Accuracy:
Accuracy is valid from 10% of the range to 95% of the range
Accuracy is specified as ± % of reading and is valid at 25± 3C, 55% ±10% RH.
* Technical Spec & Appearance can change without prior Notice.
© www.measurecurrent.in.