Download NV-3272 Datasheet

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Islanding wikipedia , lookup

Pulse-width modulation wikipedia , lookup

Telecommunications engineering wikipedia , lookup

Spectral density wikipedia , lookup

Mains electricity wikipedia , lookup

Regenerative circuit wikipedia , lookup

Videocassette recorder wikipedia , lookup

Alternating current wikipedia , lookup

Television standards conversion wikipedia , lookup

Heterodyne wikipedia , lookup

Transcript
Model NV-3272
32-Channel Active Receiver Hub
Front
Rear
RJ45A Adaptors
Included
Features:
TM
• Adaptive DigitalEQ fully automatic 4-band equalization provides adjustment-free
equalization every time
• Compact rack-mountable 19” 1U high enclosure features 32 channels with 1 output per channel
• Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT
transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m)
with shielded twisted-pair when used with any passive NVT transceiver or hub
• RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
• Exceptional interference rejection
• Built-in transient protection and ground-lifting
• Automatic compensation for reverse-polarity wiring
• At-a-glance per-channel diagnostics
• Compatible with qualified UTP cameras
• Includes thirty-two 2ft (60cm) coax jumper cables, rack mount hardware and eight NV-RJ45A adaptors
• Limited lifetime warranty
TM
Employing NVT’s latest generation DigitalEQ technology, the NV-3272 is an 32-channel active (amplified) hub that allows
the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better
unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content. The
unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone,
datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no
annoying “hum-bars” when ground-potential differences exist. With built-in transient protection, damaging voltage spikes
are eliminated.
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • FAX (+1) 650.326.1940
nvt.com • www.nvt.com/email
-104-
Model NV-3272
32-Channel Active Receiver Hub
Technical Specifications
V I D E O D I S TA N C E R E C O M M E N D AT I O N S
WIRE TYPE
780
700
10 MHz
9 MHz
630
8 MHz
Unshielded Twisted Pair
0 to 3,000ft 24-16 AWG (0,5-1,31mm)
Category Type
2 or better
Impedance
100 ± 20 ohms
DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance
19 pF/ft max (62 pF/m max)
Shielded Twisted Pair
0 to 1,000ft (0 to 300m)
24-16 AWG (0,5-1,31mm)
7 MHz
LEDs
ce
tan
Dis
315
1,6km
3km
6 MHz
5 MHz
Frequency
ce
Distan
alEQ
Digit
Max
ive
ss
Pa
400
ance
Dist
EQ
tub
xS
Ma
475
ax
M
Camera Lines of Resolution
550
1km
300m
100m
30m
Cat 5 Wire Distance
4 MHz
Power On:
Per-channel status:
Blue LED
Off = no signal detected
Green = valid video signal
Amber = marginal signal detected
Red = faulty signal detected
POWER
IEC380 power inlet
115 / 230V 50 / 60 Hz
315mA
75 Watts 250 BTU / hour
IEC with molded power cord (included)
5x20mm type T fuse 315mA 250V
3 MHz
Power inlet
Protection
10,000ft
1 mile
3,000ft
1,000ft
300ft
100ft
235
Cat 5 Wire Distance
E N V I R O N M E N TA L
VIDEO
Frequency response
DC to 10 MHz
Equalization
0.5 dB typ
Automatic (no adjustment) 0 to 3000ft (0 to 1km)
for NTSC or PAL standards
Automatic polarity detection and control
Common-mode / Differential-mode rejection
15 KHz to 5 MHz
60 dB typ
Impedance
Coax, female BNC
75 ohms
UTP, Screw terminal block or RJ45
100 ohms
1+
2
3+
4
5+
6
7+
8
-
Temperature
Minimum airflow
Humidity (non-condensing)
Transient Immunity
MECHANICAL
Dimensions, excluding brackets and connectors
Dimensions
17in wide, 1.7in high, 8.125in deep
43cm wide, 4,5cm high, 20cm deep
Product Weight
8.0lbs (3,6kg)
Packaged Weight
12.34lbs (5,6kg)
ACCESSORIES
Ch. 2, 6, 10, 14, 18, 22, 26, or 30
Ch. 1, 5,9, 13, 17, 21, 25, or 29
+32 to +1223 °F (0 to +50
°C)
3
4 ft /min (0,1m /min)
0 to 95%
per ANSI / IEEE 587 C62.41
Mounting
Ch. 3, 7, 11, 15, 19, 23, 27, or 31
Ch. 4, 8, 12, 16, 20, 24, 28, or 32
Cables
NV-RJ45A
(Included)
Rack mount “L” brackets for front,
rear, or wall installations;
rubber feet for desk applications
Thirty-two 2ft (60cm) coax jumpers
Molded IEC power inlet cord 7ft (200cm)
Eight NV-RJ45A RJ45 to-screw-terminal
Specifications subject to change without notice.
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • FAX (+1) 650.326.1940
nvt.com • www.nvt.com/email
Model NV-3272
32-Channel Active Receiver Hub
Typical Applications
Passive to Active Application up to 3,000ft (1km)
NV-3272
NV-208A-M
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
Monitor
DVR / NVR
IP
Active to Active Application up to 1 mile (1,6km)
NV-3272
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
NV-653T
Monitor
DVR / NVR
IP
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • FAX (+1) 650.326.1940
nvt.com • www.nvt.com/email
Copyright © 2011 NVT, Inc.
410-3272-1-D