Download Mallinckrodt Cr-51 - Nuclear Education Online

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Anemia wikipedia , lookup

Blood transfusion wikipedia , lookup

Hemolytic-uremic syndrome wikipedia , lookup

Schmerber v. California wikipedia , lookup

Blood donation wikipedia , lookup

Jehovah's Witnesses and blood transfusions wikipedia , lookup

Men who have sex with men blood donor controversy wikipedia , lookup

Plateletpheresis wikipedia , lookup

Blood type wikipedia , lookup

Autotransfusion wikipedia , lookup

Rh blood group system wikipedia , lookup

Hemorheology wikipedia , lookup

Blood bank wikipedia , lookup

Transcript
Sodium Chromate Cr 51 Injection
Package inserts are current as of January, 1997. Contact Professional Services,
1-888-744-1414, regarding possible revisions.
Click Here to Continue
Click Here to Return to Table of Contents
Sodium Chromate Cr 51 Injection
Diagnostic—For Intravenous Use
370,372,374
A370I0
Revised 3/96
DESCRIPTION
Sodium Chromate Cr 51 (Na2 51CrO4) Injection is available for diagnostic use as a sterile, non-pyrogenic
solution. Each milliliter contains 3.7 megabecquerels (100 microcuries) chromium Cr51 on the
calibration date, and 0.5 milligrams sodium bicarbonate as a buffer. The pH is adjusted to between 7.5
and 8.5 with hydrochloric acid or sodium hydroxide. The specific activity is at least 370 megabecquerels
(10 millicuries) per milligram of sodium chromate.
PHYSICAL CHARACTERISTICS
Chromium-51 decays by electron capture with a physical half-life of 27.7 days.1 The principal photon
useful for detection is listed in Table 1.
Table 1: Principal Radiation Emission Data1
Radiation
Gamma-1
Mean Percent
Per
Disintegration
9.83
Energy
(keV)
320.1
EXTERNAL RADIATION
The specific gamma ray constant for chromium Cr51 is 0.18 R/mCi-hr at 1 cm. The first half-value
thickness is 0.17 cm of lead (Pb). A range of values for the relative attenuation of the radiation emitted by
this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For
example, the use of a 1.68 cm thickness of Pb will decrease the external radiation exposure by a factor of
about 1,000.
Table 2: Radiation Attenuation by Lead Shielding
Shield
Coefficient of
Thickness (Pb) cm
Attenuation
0.17
0.56
1.12
1.68
2.25
0.5
10 -1
10 -2
10 -3
10 -4
To correct for radioactive decay of chromium-51 , the fractions that remain at selected time intervals after
the date of calibration are shown in Table 3.
Table 3. Physical Decay Chart; Chromium Cr51,
Half-Life 27.7 Days
Days
Fraction
Remaining
Days
Fraction
Remaining
0*
1.000
17
0.654
1
0.975
18
0.637
2
3
0.951
0.928
19
20
0.622
0.606
4
0.905
21
0.591
5
6
0.882
0.861
22
23
0.577
0.562
7
8
0.839
0.819
24
25
0.549
0.535
9
10
0.798
0.779
26
27
0.522
0.509
11
12
0.759
0.741
28
29
0.496
0.484
13
14
0.722
0.704
30
60
0.472
0.223
15
16
0.687
0.670
90
0.105
*Calibration Time
CLINICAL PHARMACOLOGY
Chromium is present in the hexavalent (plus 6) state, in which form it readily penetrates the red blood
cell, attaches to the hemoglobin, and is reduced to the trivalent (plus 3) state. This state is maintained
until the red blood cell is sequestered by the spleen, at which time the chromium is released to the plasma
and is readily excreted in the urine. In the trivalent state, chromium Cr51 is not re-utilized for tagging of
additional red blood cells. Since the product has a high specific activity, adequate red blood cell tagging
is secured in minimum time without demonstrable effect on cell life.
INDICATIONS AND USAGE
Sodium Chromate Cr 51 Injection may be used in the determination of red blood cell volume or mass, the
study of red blood cell survival time, and evaluation of blood loss.
CONTRAINDICATIONS
None known.
WARNINGS
None known.
PRECAUTIONS
General
As in the use of any radioactive material, care should be taken to minimize radiation exposure to the
patient, consistent with proper patient management, and to insure minimum radiation exposure to
occupational workers.
In order to preclude or minimize the possibility of contamination and increased fragility of the tagged red
blood cells, sterile techniques must be employed throughout the collection, tagging, rinsing, suspending,
and injection of red blood cells. Also, the number of washes and transfers should be kept to a minimum,
and only sterile, pyrogen-free isotonic diluent should be employed throughout the tagging procedure.
Specific activity should be not less than 370 megabecquerels (10 millicuries) per milligram of sodium
chromate at the time of use. Do not use after expiration date stated on label.
Radiopharmaceuticals should be used only by physicians who are qualified by specific training in the safe
use and handling of radionuclides produced by nuclear reactor or particle accelerator and whose
experience and training have been approved by the appropriate government agency authorized to license
the use of radionuclides.
Carcinogenesis, Mutagenesis,
Impairment of Fertility
No long-term animal studies have been performed to evaluate carcinogenic or mutagenic potential, or
whether this drug affects fertility in males or females.
Pregnancy Category C
Animal reproductive studies have not been conducted with Sodium Chromate Cr 51. It is also not known
whether Sodium Chromate Cr 51 can cause fetal harm when administered to a pregnant woman or can
affect reproduction capacity. Sodium Chromate Cr 51 should be given to a pregnant woman only if
clearly needed.
Ideally, examinations using radiopharmaceuticals, especially those elective in nature, of a woman of
childbearing capability should be performed during the first few (approximately 10) days following the
onset of menses.
Nursing Mothers
Since Chromium-51 is excreted in human milk during lactation, formula feedings should be substituted
for breast feedings.
Pediatric Use
Safety and effectiveness in pediatric patients have not been established.
ADVERSE REACTIONS
No adverse reactions specifically attributable to the use of this drug have been reported.
DOSAGE AND ADMINISTRATION
The usual dosages in the average adult patient (70 kg) are as follows:
The determination of red blood cell volume or mass: 0.37 to 1.11 megabecquerels (10 to 30
microcuries).
The determination of red blood cell survival time: 5.55 megabecquerels (150 microcuries).
The evaluation of blood loss: 7.4 megabecquerels (200 microcuries).
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to
administration. Do not use if contents are turbid.
The patient dose should be measured by a suitable radioactivity calibration system immediately prior to
administration.
RADIATION DOSIMETRY
The estimated absorbed radiation doses2 to an average patient (70 kg) from an intravenous injection of a
maximum dose of 7.4 megabecquerels (200 microcuries) of Sodium Chromate Cr 51 are shown in Table
4.
Table 4. Absorbed Radiation Doses
Tissue
Sodium Chromate Cr 51
mGy/7.4
rads/
MBq
200 µCi
Blood
2.00
0.20
Spleen
26.4
2.64
Testes
0.66
0.066
Ovaries
0.66
0.066
Total Body 0.55
0.055
HOW SUPPLIED
Catalog Number
370 Sodium Chromate Cr 51 Injection is supplied at a concentration of approximately 3.7 megabecquerels
(100 microcuries) per milliliter in vials containing approximately 9.25 megabecquerels (250
microcuries) as of the date of calibration. The specific activity is greater than 370 megabecquerels
(10 millicuries) per milligram of sodium chromate within the expiration time of the product stated on
the label.
372 A-C-D (Anticoagulant-Citrate-Dextrose) Solution (Modified) is supplied in 100-milliliter vials
containing 10 milliliters of solution for tagging red blood cells with Sodium Chromate Cr 51. Each
milliliter contains 8 milligrams of citric acid (anhydrous), 25 milligrams sodium citrate (dihydrate)
and 12 milligrams dextrose (anhydrous). Ratio of ingredients differs from USP Formulas.
STORAGE AND HANDLING
Store at room temperature (below 86°F/30°C).
Storage, handling and disposal of Chromium-51 solutions should be controlled in a manner that is in
compliance with the appropriate regulations of the governmental agency authorized to license the use of
this radionuclide.
DIRECTIONS FOR USE (TEST PROCEDURE)
NOTE 1: Wear waterproof gloves during the entire red cell tagging procedure and during
subsequent patient dose withdrawals.
NOTE 2: Make transfers of Chromium-51 solutions during the tagging procedure and during
subsequent injections of radioIabeled blood cells with adequately shielded syringes.
NOTE 3: Maintain adequate shielding of the radioIabeled blood cells by using a lead vial shield
and cover.
Various procedures may be employed in performing the diagnostic tests for which
Sodium Chromate Cr 51 is indicated. The following outlines specific procedures which
may be elected in performing these tests.
Red Cell Volume
The following procedure provides a direct measurement of the red blood cell component, and the whole
blood volume is inferred from the venous hematocrit. The plasma chromium-51 radioactivity is excluded
by calculation, thereby obviating the aseptic washing of the red blood cells.
Procedure
1. With A-C-D solution from the A-C-D tagging vial, wet a 20-mL syringe and then use the syringe to
withdraw 15 mL of blood from the antecubital vein.
2. Slowly and gently (to prevent hemolysis) aseptically inject the contents of the syringe into the vial of AC-D solution.
3. With a 10-mL syringe aseptically add approximately 3.7 MBq (100 µCi) of Sodium Chromate Cr 51
Injection to the blood-A-C-D mixture.
4. Gently mix the blood by intermittent swirling every 5 to 10 minutes. Allow to tag at room temperature
for 30 minutes.
5. With a 1-mL syringe aseptically add 30 to 50 mg of suitable ascorbic acid injection to the vial, mix
gently, and allow to stand for 5 minutes.
6. After gently mixing, withdraw exactly 10 mL of the tagged red blood cell (RBC) suspension, and inject
intravenously into the patient.
7. Determine the hematocrit of the remaining Tagged RBC Suspension (A).
8. Pipet 1 mL of the tagged RBC suspension into a 100-mL volumetric flask and dilute to 100 mL with
water. Mix thoroughly and pipet 4 mL into a counting vial. This is the Whole Blood Standard (B).
9. Centrifuge the remaining tagged RBC suspension, and pipet 1 mL of the plasma into a 100-mL
volumetric flask, and dilute to 100 mL with water. Mix thoroughly, and pipet 4 mL into a counting
vial. This is the Plasma Standard (C).
10. Ten to twenty minutes post-injection withdraw approximately 20 mL of blood from the patient with a
sterile, evacuated container containing an anticoagulant.
11. Pipet 4 mL of the whole blood into a counting vial. This is the Patient Whole Blood Sample (D).
12. Remove a sample for a Patient Hematocrit (E) and centrifuge the remaining blood.
13. Pipet 4 mL of plasma into a counting vial. This is the Patient Plasma Sample (F).
14. Count the:
Whole Blood Standard (B)
Plasma Standard (C)
Patient Whole Blood Sample (D)
Patient Plasma Sample (F)
Background
Subtract background from B, C, D, F. Counting times should be equal and of sufficient length to provide a
minimum of 10,000 counts.
Calculations
A = Hematocrit of Tagged RBC Suspension (step 7)
B = Net Whole Blood Standard Count
C = Net Plasma Standard Count
D = Net Patient Whole Blood Sample Count
E = Patient Hematocrit (step 12)
F = Net Patient Plasma Sample Count
[B - C( 1 - A)] E
Red Cell Volume (mL) =
Whole Blood Volume (mL) =
Plasma Volume (mL) =
x 1000
D - F (1 - E)
Red Cell Volume (mL)
Patient Hematocrit
Whole Blood Volume (mL) -Red Cell Volume (mL)
Red Cell Survival
Procedure:
1. With A-C-D solution from the A-C-D tagging vial, wet a 20-mL syringe and then use the syringe to
withdraw 15 mL of blood from the antecubital vein.
2.
Slowly and gently (to prevent hemolysis) aseptically inject the contents of the syringe into the vial of
A-C-D solution.
3.
With a 10-mL syringe aseptically add approximately 7.4 MBq (200 µCi) of Sodium Chromate Cr 51
Injection to the blood-A-C-D mixture.
4.
Gently mix the blood by intermittent swirling every 5 to 10 minutes. Allow to tag at room
temperature for 30 minutes.
5.
Withdraw 20 mL of the tagged RBC suspension and inject intravenously into the patient.
6.
At 24 hours post injection and every 2 to 3 days thereafter for a minimum of 30 days or until a halftime is reached, withdraw 10 mL of blood into a sterile, evacuated container containing an
anticoagulant. Determine the hematocrit of each sample.
NOTE:
Each sample should be labeled with the date and time of withdrawal. Each withdrawal should
be at approximately the same time each day. Frequency of sampling depends primarily on
convenience. For statistical accuracy a minimum of 10 samples should be obtained.
7.
Pipet 4 mL of each sample into a counting vial and label accordingly.
8.
Count all samples at the same time to negate the effect of radioactive decay. Count and subtract
background.
Calculations
The calculations are based on using the 24-hour sample as 100% and making it the starting point. All
other samples are calculated as a percent of the 24-hour sample, and indicate the percent remaining. If
later samples have hematocrits different from the 24-hour sample, the correction below should be made.
%Remaining =
Net Whole Blood Count (each sample)
Net Whole Blood Count (at 24 Hours)
x
Hematocrit (at 24 hours) x 100
Hematocrit (each sample)
As indicated, the above calculation should be made on each sample individually. Upon completion of the
calculation, the percent remaining should be plotted on the logarithmic scale against time on semilogarithm paper. Draw a best-fit straight line through the points. The red cell survival time is determined
from the graph by finding the time at which the straight line reached 50 percent.
Normal Range: Normal 28 to 40 days
Abnormal Less than 28 days
The U.S. Nuclear Regulatory Commission has approved distribution of this radiopharmaceutical to
persons licensed to use byproduct material listed in Section
35.100, and to persons who hold an equivalent license issued by an Agreement State.
1
Kocher, David C., “Radioactive Decay Tables,” DOE/TIC-11026, page 74 (1981).
2
Method of Calculation: “S” Absorbed Dose per Unit Cumulated Activity for Selected Radionuclides and
Organs, MIRD Pamphlet No. 11 (1975).
Revised/ 3/96
Mallinckrodt, Inc.
St. Louis, MO 63134
A370I0
370, 372, 374
Click Here to Return to Table of Contents