Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Conventional Indicating Heat Detector Kits Head Office Wellington PO Box 35-063 Naenae 17 Eastern Hutt Rd Wingate Lower Hutt Tel (04) 567-3229 Fax (04) 567-3644 www.pertronic.co.nz [email protected] [email protected] Auckland Office PO Box 15-867 New Lynn 119 Lansford Cres Avondale Auckland Tel (09) 820-8228 Fax (09) 820-8284 Product Overview: Pertronic Industries manufacture Heat Detector Kits for use in extreme situations where the temperature exceeds the ability of the indicating circuit electronic devices to operate reliably, eg. extreme heat (kitchen range-hoods) or cold (freezers/cool stores), etc. Heat Detector Kits consist of: Encapsulated Heat Sensor Unit: is mounted inside the area to be protected and therefore may be exposed to very high or low temperatures. Alarm Indication Unit: is mounted outside the area to be protected and is therefore not exposed to the potential extreme temperature. Features: ¾ Fast response, fixed temperature Fire Alarm Heat Detector. ¾ Protected against false activation caused by vibration or other transient impulses. ¾ Complies fully with NZS4512:2003. Encapsulated Heat Sensor Unit: ¾ Encapsulated thermo-mechanical heat sensor element: Black (1250C); Green (930C); Yellow (770C) and Blue (570C). ¾ 3-metre fire-rated cable connection to Alarm Indication Unit. Alarm Indication Unit: ¾ Brass terminals accept up to 1.5mm2 cable ¾ Bi-directional circuit connection terminals - either of the ‘Red’ terminals may be connected to the fire panel. ¾ Red LED indication: the LED latches ON when the thermo-mechanical sensor element activates. De-powering the heat detector resets the LED. ¾ The detector clamps the circuit voltage at 2.3V Note: the Alarm Indication Unit must be installed in a remote location outside the extreme temperature area where the Encapsulated Heat Sensor Unit is mounted. Specifications: Electrical: Environmental: - Indicator Unit Mechanical: - Thermal Unit - Indicator Unit Operating Voltage 12 to 24Vdc Quiescent Current 0mA Alarm Current Operating Temperature Range 0 to +80 oC Humidity (non-condensing) 10 to 90% RH Dimension (Diam x Height mm) 65 x 40 65 x 24 Weight Material Colour 400 gms (includes cable) Polycarbonate Polycarbonate White White panel dependent Compatibility: Indicating Heat Detectors are compatible with the following products: Product ISO 9001: 2000 International Standards Certifications QAC/R61/0051 Software Version Release Date F1 v2.3 & above November 2003 F4 v2.26 & above November 2003 F16 v7.0 & above November 2003 F16e v1.10N & above June 2004 Loop Responder v3.00N & above May 2004 0721-Indicating Heat Detector Kits Iss 1.2 200706 Heat Detector Layout: T hermo-Mechanical Sensor Element 'Black' Encapsulated Heat Sensor Unit: installed inside the high temperature area High Temperature Area Ambient Temperature Area LED Indicator 3m Fire-Rated Cable Alarm Indication Unit: installed outside the high temperature area Encl Ind Heat Kit 20070214 Heat Detector Connections: Encapsulated Heat Sensor Units High Tem perature Area Am bient Temperature Area Alarm Indication Units Red Red Red 10kΩ EOL Bl ac k Bl ac k Red + Fire Alarm Panel M Ensure the 'M' cable is separated and NOT tw isted together. Failure to com ply m ay m ean loss of a detector is not detected. Encl Ind Heat Kit Connection 20070214 Product Code: Description Encapsulated Indicating Heat Detector Kit, Blue : 57oC Encapsulated Indicating Heat Detector Kit, Yellow : 77oC Encapsulated Indicating Heat Detector Kit, Green : 93oC Encapsulated Indicating Heat Detector Kit, Black : 125oC Product Code IHDBEK IHDYEK IHDGEK IHDBKEK PERTRONIC INDUSTRIES LTD Head Office: 17 Eastern Hutt Rd, Wingate, Lower Hutt Tel (04) 567-3229 Fax (04) 567-3644 www.pertronic.co.nz [email protected] [email protected] Auckland Office: 119 Lansford Cres, Avondale, Auckland Tel (09) 820-8228 Fax (09) 820-8284 ‘Pertronic’ and ‘Firetronix’ are registered trademarks of Pertronic Industries Ltd