Download Series 300 Frequently Asked Questions Features

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Electrification wikipedia, lookup

Mains electricity wikipedia, lookup

Buck converter wikipedia, lookup

Switched-mode power supply wikipedia, lookup

Opto-isolator wikipedia, lookup

Alternating current wikipedia, lookup

Metadyne wikipedia, lookup

Voltage optimisation wikipedia, lookup

Stray voltage wikipedia, lookup

Distribution management system wikipedia, lookup

Pulse-width modulation wikipedia, lookup

Variable-frequency drive wikipedia, lookup

Islanding wikipedia, lookup

Electrical substation wikipedia, lookup

Three-phase electric power wikipedia, lookup

Switch wikipedia, lookup

Crossbar switch wikipedia, lookup

Resonant inductive coupling wikipedia, lookup

Relay wikipedia, lookup

Transcript
4. Remote Transfer to Emergency (Feature 17) – Requires a customer supplied normally closed contact.
Opening of the contact initiates engine start and transfer to the emergency source. Closing the contact
activates the retransfer to normal delay prior to re-transfer. In the event that the emergency source fails while
the transfer switch is connected to emergency and the remote contact is open, the transfer switch will
automatically retransfer to the normal source.
5. Inhibit Transfer to Emergency (Feature 34B) – Requires a customer supplied normally closed contact.
Opening of the contact will prohibit the transfer switch from transferring to the emergency source while
connected to the normal source.
6. Bypass Transfer Time Delay - Requires a customer supplied normally closed contact. Opening of the
contact bypasses the retransfer to normal time delay if active.
What is the operating temperature of the ATS?
The standard operating temperature of the ATS is 0 to 40ºC or 32 to 104ºF, controller is –20 to 60ºC or –4 to
140ºF.
DISCONTINUED
PRODUCT
Note: When temperatures can be experienced below 32ºF, a strip heater (Accessory 44A & 44G) can be
used to help prevent freezing and condensation.