Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
NWHP-CDT High Power Compact Diffused Tube Light Model: NWHP-CDT The High Power Diffused Tube is one of the best kept secrets in Line Scan. It is a low profile, narrow body version of Metaphase’s area scan diffused tube light with an aperture designed for line scan applications. This High Power version boasts brightness three times greater than the MB-CDT (standard power Compact Diffused Tube Line Light). Its diffused and multi-directional light output makes this light perfectly suited for inspecting highly specular objects such as gel tablets, metallic materials, and items wrapped in clear plastic film. SPECIFICATIONS FEATURES Compact design and aperture for line scan applications High Intensity for line scan applications with high KHz scan rates Diffused and multi directional light output is ideal for highly specular applications Available up to 85 inch length and longer Includes manual dimmer (wired in-line with light) or optional 0-10VDC intensity control (-Z option) Power source: Cable: Housing: Operating Temperature: Illuminance: Intensity Control: Lifetime Hours: 24 VDC 10 foot (3.05 m) cable with flying leads Aluminum -30°C to 60°C 170,000 Lux (consult Metaphase for possible Higher intensity) Optional 75,000 SPECIFICATIONS (CONTINUED) Model NWHP-CDT309 Length 10 in (25.4 cm) Model NWHP-CDT1109 Length 50 in (127 cm) NWHP-CDT409 15 in (38.1 cm) NWHP-CDT1209 55 in (139.7 cm) NWHP-CDT509 20 in (50.8 cm) NWHP-CDT1309 60 in (152.4 cm) NWHP-CDT609 25 in (63.5 cm) NWHP-CDT1409 65 in (165.1 cm) NWHP-CDT709 30 in (76.2 cm) NWHP-CDT1509 70 in (177.8 cm) NWHP-CDT809 35 in (88.9 cm) NWHP-CDT1609 75 in (190.5 cm) NWHP-CDT909 40 in (101.6 cm) NWHP-CDT1709 80 in (203.2 cm) NWHP-CDT1009 45 in (114.3 cm) NWHP-CDT1809 85 in (215.9 cm) Specifications are subject to change Copyright © Metaphase Technologies. All rights reserved 2-243-16 211 Sinclair Road, Suite 100 Bristol, PA 19007 USA www.metaphase-tech.com 2 DRIVERS/OPTIONS APPLICATIONS Reflective, mirror-like surfaces Metallic materials such as aluminum, brass, copper, steel and stainless steel High-gloss finishes Curved or round objects such as gel tablets, bearings, or cylinder shaped items Plastic film wrapped objects WAVELENGTH (nanometers) 24V – for use with a standard 24V constant voltage power supply [24] ULC-2 – for use with constant current controllers such as our ULC-2 Universal Controller [U] ILS – configure for strobing applications with power boost for increased intensity for rising and falling edge triggers [ILS] Keyence – compatible with Keyence light controllers such as the Keyence CA-DC21e [KEY] Baumer – compatible with Baumer VeriSens cameras Cognex – compatible with Cognex cameras Versions also available for 3rd party controllers such as: Gardasoft, Triniti, Opteon, Visics, etc. 0-10VDC intensity control [-Z] COMPLIANCE Note: Multispectral & custom wavelengths available W R G B IR UVL UVS RGB White 6000K Red 630 nm Green 530 nm Blue 470 nm Infrared 850 395 nm 365 nm 630/530/470 nm Specifications are subject to change Copyright © Metaphase Technologies. All rights reserved 2-243-16 CONTACT US Contact your Metaphase Technologies representative at 215-639-8669 or your local representative for additional details, options, and customizations. 211 Sinclair Road, Suite 100 Bristol, PA 19007 USA www.metaphase-tech.com