Download square metal coffee table

: square metal coffee table
assembly instructions
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
B
A
bolt: 1/4" dia x 3/4" 8x
allen key 1x
C
rubber bumper 8x
7494875 - 12/05
page 1 of 3
: square metal coffee table
assembly instructions
1. Aligning the top of the legs with the supports underneath the tabletop, set the legs into place. Insert bolt (A) through
pre-drilled holes in tabs and into the pre-drilled holes in the underside of the table frame. Tighten using allen key (B).
A
B
8x
7494875 - 12/05
page 2 of 3
: square metal coffee table
assembly instructions
2. Attach rubber bumpers (C) to the interior lip of table frame as shown. Carefully place glass into frame as shown.
CARE INSTRUCTION
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.
7494875 - 12/05
page 3 of 3