Download ps-rm-48/ps-rm-48-2

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
Features:
»» Power faction correction
»» 250W output power (single)
»» 2X250W or 1X500W output power
(dual)
»» Redundancy (250W, dual)
»» Active current sharing (dual)
»» Over-current, over-voltage and
thermal protection
»» AC, DC, and FAN monitoring
The 48V Rack Mount Power Supply is designed to provide power to Telemetrics robotics systems. It produces enough power to
operate multiple 48V Pan/Tilt heads, auxiliary robotics devices such as trolley, televator, teleglide, cameras, large teleprompters
and confidence monitors. The power supply is available in single (PS-RM-48V) and dual (PS-RM-48V-2) configuration to satisfy
specific customer requirements. The single model has one DC output, which can deliver 250 W of power. The dual model has
2 DC outputs, each one capable of providing 250 W or power. If only one output on the dual model is used, it can deliver up to
500 W of power at this output. If only one output is used and the power consumption does not exceed 250 W, the dual model
will operate as fully redundant power.
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
Mechanical
Specifications
Voltage
Frequency
Current (Input)
Current (Output)
Inrush Current (Input)
Power Inlet ( Input)
Power (Output)
Total Regulation
(Output)
Turn-on delay (Output)
Temperature Coefficient
85-264 V AC ( Input) / 48 V DC (Output)
47-63 Hz (Input)
2.8 A max at 115 V AC (single)
1.4 A max at 230 V AC (single)
5.6 A max at 115 V AC (dual)
2.8 A max at 230 V AC (dual)
5 A (single)
2 X 5 A or 10 A (dual)
40 A max at 264 V AC (single)
80 A max at 264 V AC (dual)
IEC 60320/C14
250 W (single)
2 X 250 W or 500 W (dual)
+/- 2% max
2.0 s max
+/- 0.02 % Celcius
Overvoltage Protection
115 +/- 5 %
Short Circuit Protection
Continuous
Connector
Camera Power
Dimensions
XLR-7 F, female
40 W (13.5 VDC, 3 A max)
Specifications and features subject to change without notice
Weight
19.0” W X 1.75” H X 11.5” D (10.5” behind rack)
(48.3 X 4.4 X 29.2 cm)
7.0 lbs (3.2 kg)
Environmental
Operating Temperature
Storage Temperature
Humidity
0 degrees Celcius to 40 degrees Celcius
-40 degrees Celcius to 85 degrees Celcius
5% to 95% RH, non-condensing
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
PS RACK 48V POWER SUPPLY –
PS-RM-48/PS-RM-48-2
Revised: 4-16-15
6 Leighton Place, Mahwah, New Jersey, U.S.A. 07430 • phone: 201.848.9818 • fax: 201.848.9819 • telemetricsinc.com