Survey
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
Solid State Relays Datasheet WG A3 Comus International Bvba Overhaamlaan 40 3700 Tongeren, Belgium Phone: +32 12390400 Fax: +32 12235754 Email: [email protected] www.comus.be Features Switching Zero-cross and Random Output Back to back SCR INPUT DC Applications Three phase loads ( motors, transformers ) resistive and inductive loads with cos > 0.85 (Z-type) inductive load ( R-type ) Technical data WG A3 12D... WG A3 16D... 10 Z 25 Z 45 Z 10 R 25 R 45 R Input circuit Control voltage range 3...32 VDC Control current max 25 mA Turn-off voltage min.. 1 VDC Input resistance Constant current Output circuit Load voltage Range 24...480 VAC (12D) 24...660 VAC (16D) 48...480 VAC (12D) 48...660 VAC (16D) 1200 Vdrm (12D) 1600 Vdrm (16D) Peak-off state votage Off-state leakage current 10 mA eff. Load current range 0,1..10 A 0,2..25 A 0,4..45 A 0,1..10 A 0,2..25 A 0,4..45 A Surge current 1 half wave 110 Apeak 230 Apeak 500 Apeak 110 Apeak 230 Apeak 500 Apeak 500 A²s 60 A²s I²t for fusing 60 A²s 260 A²s On-state voltage 1,6 Vpeak Off-state (static) dv/dt 1000 V/µs 260 A²s 500 A²s 11 ms 0,1 ms 47 Ω / 10 nF Snubber General data Turn-on time max. 11 ms 0,1 ms Turn-off time max. 11 ms 0,1 ms 11 ms Line frequency range. 47...63 Hz Isolation volt. between input/output 4.000 V Isolation volt. between input-output/base 2.500 V Isolation resistance 50 MΩ Operating temperature -20...+80 °C Recommended varistor SIOV-S20 K420 Approvals page 1 www.comus.com Rev. 2 ECN 06012701 Comus International, Belgium : + 32 (0)12 390 400, France : + 33 (0) 1 43 96 86 10, USA : + 1 973 777 6900 - Assemtech, UK : +44 (0) 1255 862 236 Solid State Relays Datasheet WG A3 Comus International Bvba Overhaamlaan 40 3700 Tongeren, Belgium Phone: +32 12390400 Fax: +32 12235754 Email: [email protected] www.comus.be Dimensions in mm 107,0 max 23,0 ±0,3 4 M 6~ 4~ 20 73,5 ± 0,3 55,5 ± 0,2 47,6 ± 0,1 5~ 3~ 12,0 ± 0,2 1~ A1+ M 3, 5 23,5 ± 0,2 A2- 5,0 ± 0,2 20 2~ 36 27,0 ± 0,3 92,0 ± 0,2 Housing specification Weight Approx. 430 g. Housing material Glass filled polyester Potting compound UL recognized Epoxy Base plate Aluminium , nickel plated Terminals Input : M3,5-screws Output : M4-screws page 2 www.comus.com Rev. 2 ECN 06012701 Comus International, Belgium : + 32 (0)12 390 400, France : + 33 (0) 1 43 96 86 10, USA : + 1 973 777 6900 - Assemtech, UK : +44 (0) 1255 862 236 Solid State Relays Datasheet WG A3 Comus International Bvba Overhaamlaan 40 3700 Tongeren, Belgium Phone: +32 12390400 Fax: +32 12235754 Email: [email protected] www.comus.be Circuit diagram 1~ Zero cross & Nullspannungsbzw. Random OUTPUT 1 Lastkreis 1 Momentanschalter Switching 2~ 3~ A1+ INPUT Steuerkreis Zero cross & NullspannungsRandom bzw. Momentanschalter Switching OUTPUT 2 Lastkreis 2 A24~ 5~ Zero cross & NullspannungsRandom bzw. Switching Momentanschalter OUTPUT 3 Lastkreis 3 6~ Ordering WG A3 12 D 10 Z Voltage 12 : 1200 V 16 : 1600 V Current 10 : 10A 25 : 25A 45 : 45A Switching Z : Zero cross R : Random page 3 www.comus.com Description Part Number Protective case large 8440 5701 770 Thermal Conducting paste 8406 0180 020 Heat sink WG K2/100 5981 5701 110 Heat sink WG K3/160 5981 5701 370 Heat sink WG K4/160L 5981 5701 371 Mounting plate 5981 5701 420 Rev. 2 ECN 06012701 Comus International, Belgium : + 32 (0)12 390 400, France : + 33 (0) 1 43 96 86 10, USA : + 1 973 777 6900 - Assemtech, UK : +44 (0) 1255 862 236 Solid State Relays Datasheet WG A3 Comus International Bvba Overhaamlaan 40 3700 Tongeren, Belgium Phone: +32 12390400 Fax: +32 12235754 Email: [email protected] www.comus.be Derating-diagrams WG A3 12D 10 Z/R H e a t s ink K/ W 35 1,6 Heat sink Power dissipation [W rms] 30 25 Load current for 1 SSR 2 ,5 20 15 WG K2/100 6A WG K3/160 10 A WG K4/160L 10 A Values for 40°C enclosure-temperature and mounted with conduction paste between the SSR and the heat sink 10 wit ho ut he a t s ink 5 WG A3 12D 25 Z/R H e a t s ink K/ W 100 Load current for 1 SSR 0 ,4 Power dissipation [W rms] 80 Heat sink 0 ,8 60 1,6 40 2 ,5 20 5 10 15 20 25 Load current [A rms] 20 30 40 50 6A WG K3/160 16 A WG K4/160L 25 A Values for 40°C enclosure-temperature and mounted with conduction paste between the SSR and the heat sink witho ut he a t s ink 0 WG K2/100 60 70 80 Ambient temperature [°C] WG A3 12D 45 Z/R H e a t s ink K/ W 0 ,3 175 Load current for 1 SSR Power dissipation [W rms] 150 Heat sink 125 100 0 ,8 75 1,6 50 0 W. H e a t s ink 10 20 30 40 Load current [A rms] page 4 50 20 30 40 50 6A WG K3/160 17 A WG K4/160L 42 A Values for 40°C enclosure-temperature and mounted with conduction paste between the SSR and the heat sink 2 ,5 25 WG K2/100 60 70 80 Ambient temperature [°C] www.comus.com Rev. 2 ECN 06012701 Comus International, Belgium : + 32 (0)12 390 400, France : + 33 (0) 1 43 96 86 10, USA : + 1 973 777 6900 - Assemtech, UK : +44 (0) 1255 862 236