Download MODsolutions - thyssenkrupp Elevator America

ESCALATOR MODERNIZATION
MODs o l u t i o n s
ThyssenKrupp Elevator Americas
SAFE. EFFICIENT. COST-EFFECTIVE.
Modernize your escalators and improve the safety of your equipment. And with our ES-Power modernization package, you can
reduce energy use by up to 58 percent. Plus, with ES-Power, we replace everything but the existing truss and cladding.
COMMERCIAL DUTY – LOW-TRAFFIC
Rise up to 40'-0" (12.2 m)
SAFETY IMPROVEMENTS
Step Width 24", 32", 40"
(600 mm, 800 mm, 1000 mm)
Angle of Inclination 30 degrees
Speed 100 fpm (0.5 m/s)
Usage Factor 18–20 hours/day
Average Lifespan 25 years
– Handrail speed monitoring
– Missing step monitor
– Comb plate tension device switches
(horizontal and vertical activation)
Step Load per ASME A17.1 / CSA-B44 Code
HEAVY-DUTY – HIGH TRAFFIC
– Handrail inlet safety device reduces entrapment
Rise up to 60'-0" (18.2 m)
– Proven and reliable brake design
Step Width 24", 32", 40"
(600 mm, 800 mm, 1000 mm)
– Auxiliary main drive shaft brake
Angle of Inclination 30 degrees
Speed 100 fpm (0.5 m/s)
Usage Factor 20–24 hours/day
– Variable Voltage Variable Frequency (VVVF)
technology adjusts the energy consumption
based on the passenger load
– VVVF drive acts as a soft starter device
– Up to 58 percent energy savings as compared
to the industry’s conventional escalator controls
– Radar control system detects oncoming
passengers and increases speed from low
speed/sleep mode to rated speed
– Step and step-chain supervision
– Prolonged component lifespan due to reduced
– Step up-thrust protection
Average Lifespan 30 years
Step Load rated at 33% above
ASME A17.1 / CSA-B44 Code
ENERGY-SAVING IMPROVEMENTS
operating speed during sleep mode
– Skirt panel design per skirt indexing and loaded
step/skirt requirements
–Safety skirt brushes reduce side-of-step
entrapments
APPEARANCE ENHANCEMENTS
–Custom-tailored to suit each existing installation
– Modern finishes, such as stainless steel, tinted
MINIMAL DISRUPTION FOR TENANTS
– No need for costly building structural alterations
– Minimal disruption to passenger flow pattern
–
Minimal to no additional subcontractor
or opaque glass and colored handrails
–LED Lighting
–Audio messaging systems
– Remote monitoring
work is required
– Existing architectural finishes (cladding)
are retained
–Unique installation process ensures
high-precision end product
Ask your ThyssenKrupp Elevator representative
about our Advantage Packages, designed to make
the ES-Power modernization process as quick and
convenient as possible for you and your tenants.
A NEW ESCALATOR WITHIN THE EXISTING STRUCTURE.
ES-POWER PERFORMANCE PACKAGE FEATURES:
REPLACE WITH NEW STATE-OF-THE-ART EQUIPMENT
–Floor plates
–Steps, chains, axles, rollers
–Combplate assemblies
–Step tracks and supports
–Handrails
–Motor, gear box, and brake
–Handrail drive system
–Main drive sprocket assembly
–Balustrades, skirts, deckings
–Mounting hardware
–Controls, piping, and electrical
equipment
–Updated safety circuit equipment
–Lower tension carriage systems
The existing truss is cleaned, repainted and prepared for
the installation of the new ES-Power performance package
ThyssenKrupp Elevator Americas • 2600 Network Blvd., Ste. 450, Frisco, TX 75034 • Phone (877) 230-0303 • thyssenkruppelevator.com
All illustrations and specifications are based on information in effect at time of publication approval. ThyssenKrupp Elevator reserves the right to change
specifications or design and to discontinue items without prior notice or obligation. Copyright © 2015 ThyssenKrupp Elevator Corporation. CA License #651371
version 04.15