Download NES-150-48 Datasheet

NES-150
150W Single Output Switching Power Supply
series
■ Features :
•AC input range selectable by switch
•Protections: Short circuit / Overload / Over voltage
•Cooling by free air convection
•LED indicator for power on
•100% full load burn-in test
•High efficiency, long life and high reliability
•2 years warranty
..
SPECIFICATION
MODEL
OUTPUT
INPUT
NES-150-3.3
NES-150-5
NES-150-7.5
NES-150-9
NES-150-12
NES-150-15
NES-150-24
NES-150-48
DC VOLTAGE
3.3V
5V
7.5V
9V
12V
15V
24V
48V
RATED CURRENT
30A
26A
20A
16.7A
12.5A
10A
6.5A
3.3A
CURRENT RANGE
0 ~ 30A
0 ~ 26A
0 ~ 20A
0 ~ 16.7A
0 ~ 12.5A
0 ~ 10A
0 ~ 6.5A
0 ~ 3.3A
RATED POWER
99W
130W
150W
150W
150W
150W
156W
158.4W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
120mVp-p
120mVp-p
120mVp-p
120mVp-p
120mVp-p
200mVp-p
VOLTAGE ADJ. RANGE
3.2 ~ 3.5V
VOLTAGE TOLERANCE Note.3 ±3.0%
4.75 ~ 5.5V
±2.0%
7.13 ~ 8.3V
±1.0%
8.55 ~ 9.9V
±1.0%
11.4 ~ 13.5V
±1.0%
14.25 ~ 16.5V 22.8 ~ 27.6V
±1.0%
±1.0%
45.6 ~ 52.8V
±1.0%
LINE REGULATION
Note.4 ±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
Note.5 ±2.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
Note.8 800ms, 20ms/230VAC
83%
86%
86%
1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)
24ms/230VAC
VOLTAGE RANGE
90 ~ 132VAC / 180 ~ 264VAC selected by switch
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
73%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
3A/115VAC
2A/230VAC
COLD START 45A/230VAC
LEAKAGE CURRENT
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
20ms/115VAC at full load
78%
80%
254 ~ 373VDC
83%
83%
<2mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.65V
5.75 ~ 6.75V 8.6 ~ 10.1V
10.4 ~ 12.2V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
55.2 ~ 64.8V
-20 ~ +60℃ (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
VIBRATION
SAFETY STANDARDS Note.6 UL60950-1, TUV EN60950-1,GB4943.1:2011 approved
SAFETY &
EMC
(Note 7)
OTHERS
WITHSTAND VOLTAGE
I/P-FG:2KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 70% RH
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B
Compliance to EN61000-3-2,-3,GB17625.1
HARMONIC CURRENT
EMS IMMUNITY
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A
MTBF
433.3Khrs min. MIL-HDBK-217F (25℃)
199*98*38mm (L*W*H)
0.7Kg; 20pcs/15Kg/0.72CUFT
DIMENSION
PACKING
NOTE
I/P-O/P:3KVAC
ISOLATION RESISTANCE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. For the request of GB4943.1,the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
File Name:NES-150-SPEC 2012-09-24
NES-150
150W Single Output Switching Power Supply
Mechanical Specification
Case No. 902
series
Unit:mm
7
3.5
9
12
197
1
9.5
2
98
80
4
85.5
3
8.2
5
6
7
ψ
3.5
4-
+V ADJ.
M
3
57.5
4.5
120
199
190
Terminal Pin No. Assignment
3.5
38
3
28.5
3-M
18
3.5
ψ
18
9
9.5
6.5
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
Pin No.
Assignment
DC OUTPUT -V
4,5
6,7
DC OUTPUT +V
157
22
Block Diagram
fosc : 65KHz
230
115
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
POWER
SWITCHING
RECTIFIERS
&
FILTER
-V
DETECTION
CIRCUIT
FG
O.L.P.
+V
PWM
CONTROL
O.V.P.
Derating Curve
Static Characteristics
Ta=25℃
100
Others
100
85
80
3.3V,5V
55
7.5V,9V
LOAD (%)
LOAD (%)
60
70
40
20
-20
0
10
20
30
40
50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
40
25
90
180
100
200
110
220
115
230
125
250
132
264
INPUT VOLTAGE (VAC) 60Hz
File Name:NES-150-SPEC 2012-09-24
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Mean Well:
NES150-24 NES-150-48 NES-150-12 NES-150-15 NES-150-5 NES-150-7.5 NES-150-9