Download accreditation register - Metallo

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

page
1
page
2
page
3
Document related concepts
no text concepts found
Transcript 
Federal Department of Economic Affairs,
Education and Research EAER
State Secretariat for Economic Affairs SECO
Swiss Accreditation Service SAS
STS Directory
Accreditation number: STS 0535
International standard:
ISO/IEC 17025:2005
Swiss standard:
SN EN ISO/IEC 17025:2005
Metallo-Tests SA
Rue du Pont 12a
2300 La Chaux-de-Fonds
Head:
Philippe Girardin
Responsible for MS:
Sylvie Daval
Telephone:
+41 32 967 99 11
E-Mail:
mailto: [email protected]
Internet:
http://www.metallo-tests.ch
Initial accreditation:
27.04.2010
Current accreditation:
27.04.2015 to 26.04.2020
Scope of accreditation
see:
www.sas.admin.ch
(Accredited bodies)
Scope of accreditation as of 27.01.2015
Testing laboratory for chemical analyses (ICP, UV-VIS), EDX analyses and SEM
examination, physicochemical analyses of materials and metallographic examination,
waterproofness checking, environmental tests (corrosion, UV, climatic), strain and wear
tests of watch components
Group of products or materials,
field of activity
Principle of measurement 2)
(characteristics, measuring
ranges, type of test)
Test methods, remarks
(national, international
standards, in-house test
methods)
Chemical Analyzes
Nickel release by ICP method
Preparation of chemical tests samples
pH measurement in leathers
Formaldehyde analysis in leathers
and textiles
Chromium VI contents in leathers
Azo dyes
Penta- and tetra- chlorophenols
Metals
EN 1811 - EN 12472
ISO 4044
27.04.2015 / E
peo/bgs
1) Scope of accreditation type A (fix)
2) Scope of accreditation type B (flexible)
3) Scope of accreditation type C (flexible)
ISO 4045
ISO 17226-1, ISO 17226-2 ,
ISO 14184-1
ISO 17075
ISO 17234, EN 14362-1 & 3
ISO 17070
EN NF 62321, EN NF 14602,
ISO 17072-2, EN NF 10351,
ISO 11885
0535stsvz engl
Definition of flexibilty see SAS Document 741
1/3
Federal Department of Economic Affairs,
Education and Research EAER
State Secretariat for Economic Affairs SECO
Swiss Accreditation Service SAS
STS Directory
Accreditation number: STS 0535
Chemical analyzes (following)
Organotin compounds
Polycyclic aromatic hydrocarbons
PTBP, PTOP, NMP, TCEP, BM,
CM
Phthalates
ISO 16179
ZEK 01.4-18, ISO 18287
In-house method MON-C.211
- Dimethylfumarate (DMFu)
- Triglycidyl isocyanurate TGIC)
- Ethylene glycol dimetacrylate
(EGDMA)
- Hexabromocyclododecane
(HBCDD)
- Dimethylformamide (DMF)
- Short-Chain Chlorinated
Paraffins (C10-C13)
XP CEN ISO/TS 16186
In-house method MON-C.218
In-house method MON-C.219
EDX analyses
Qualitative analyzes (elements
starting from Berilium [Be])
Semi-quantitative analyzes
In-house method MON-MT.301
SEM examination
Observations, searching defects,
photos
In-house method MT-331
Metallographic examination
Steel grain size determination
Inclusion rate
Searching of inter metallic precipitate presence (delta ferrite, sigma
phase)
ISO 643
NF EN 10247
Physicochemical analyses of materials
Thickness coating measurement
by optical or SEM method
ISO 1463
Vickers micro hardness (1 to
10’000 g)
Shore A hardness
ISO 4516 - ISO 6507
Waterproofness checking
Water tightness test
Micro leak detection
ISO 22810
In-house method MON-MC.002
Environmental tests
Salted spray corrosion
Synthetic sweat corrosion
Thioacetamide corrosion
UV radiation test / Solar radiation
test
ISO 9227 - NIHS 96-50
NIHS 96-50
ISO 4538 - NIHS 96-50
NIHS 96-50, ISO 105 A02, ISO
105 A03 / EN 60068-2-9, ISO 105
B02
In-house method MON-E.113
EN 60068-2-67 - NIHS 96-50
ISO 11378-2, ISO 105 A02,
ISO 105 A03
ISO 2819
Climatic ageing test
Heat-Humidity test
Stain test in barrel
Adherence checking
27.04.2015 / E
peo/bgs
1) Scope of accreditation type A (fix)
2) Scope of accreditation type B (flexible)
3) Scope of accreditation type C (flexible)
EN 15777, ISO 16181
In-house method MON-C.223
ISO/TS 16189
ISO/DIS 18219
ISO 7619-1
0535stsvz engl
Definition of flexibilty see SAS Document 741
2/3
Federal Department of Economic Affairs,
Education and Research EAER
State Secretariat for Economic Affairs SECO
Swiss Accreditation Service SAS
STS Directory
Accreditation number: STS 0535
Strain and wear tests of watch
components
Wear tests using ceramic balls in
Turbula T2C
Colour fastness tests of leathers
(Veslic)
Striker test
Kinetic energy of glass rupture
Scratch test
Metallic strap ageing
- -Tensile and torsion test
- Alternation movements on wrist
- Disordered movements
- Play – arrow measurement of
bracelets
ISO 23160 (NIHS 96-22)
Clasp wear
Crown function wear
Crown gasket wear
Push-buttons function wear
Rotary bezel wear
In-house method MON-MC.016
In-house method MON-MC.015
In-house method MON-MC.018
In-house method MON-MC.026
In-house method MON-MC.029
Abbreviation
Signification
ASTM
Amercian Society for Testing Materials
DIN
Deutsche Industrial Norms
EN
European Norms
ISO
International Organization for Standardization
NIHS
Standard oft the Swiss watch industry
ISO 11640 – ISO 11641
NIHS 91-10 (ISO 1413)
ISO 14368-3 (NIHS 61-13)
ISO 15184
In-house method
In-house method MON-MC.010
In-house method MON-MC.013
In-house method MON-MC.014
In-house method MON-MC.031
*/*/*/*/*
27.04.2015 / E
peo/bgs
1) Scope of accreditation type A (fix)
2) Scope of accreditation type B (flexible)
3) Scope of accreditation type C (flexible)
0535stsvz engl
Definition of flexibilty see SAS Document 741
3/3
Related documents