Download RSP-200-24 Data Sheet

RSP-200
200W Single Output with PFC Function
series
■ Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
1U low profile 30mm
Optional conformal coating models (RSP-200-□CC)
LED indicator for power on
3 years warranty
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
SPECIFICATION
MODEL
OUTPUT
www. tuv.com
ID 2000000000
RSP-200-2.5
RSP-200-3.3
RSP-200-4
RSP-200-5
RSP-200-7.5
RSP-200-12
DC VOLTAGE
2.5V
3.3V
4V
5V
7.5V
12V
RATED CURRENT
40A
40A
40A
40A
26.7A
16.7A
CURRENT RANGE
0 ~ 40A
0 ~ 40A
0 ~ 40A
0 ~ 40A
0 ~ 26.7A
0 ~ 16.7A
RATED POWER
100W
132W
160W
200W
200.25W
200.4W
RIPPLE & NOISE (max.) Note.2 100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
2.97 ~ 3.8V
3.7 ~ 4.3V
4.5 ~ 5.5V
6 ~ 9V
10 ~ 13.2V
±2.0%
±2.0%
±2.0%
±2.0%
±1.0%
2.35 ~ 2.85V
VOLTAGE TOLERANCE Note.3 ±2.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.3%
LOAD REGULATION
±1.5%
±1.5%
±1.0%
±1.0%
±1.0%
±0.5%
SETUP, RISE TIME
1500ms, 50ms/230VAC
HOLD UP TIME (Typ.)
8ms at full load
Note.4 88 ~ 264VAC
VOLTAGE RANGE
FREQUENCY RANGE
47 ~ 63Hz
INPUT
PROTECTION
124 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY (Typ.)
79.5%
2A/115VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
20A/115VAC
3000ms, 50ms/115VAC at full load
230VAC /115VAC
PF>0.98/115VAC at full load
81.5%
1.1A/230VAC
84%
85.5%
2.5A/115VAC
89%
1.3A/230VAC
40A/230VAC
LEAKAGE CURRENT
<1mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
2.88 ~ 3.5V
3.8 ~ 4.62V
4.5 ~ 5.6V
5.75 ~ 7V
9.4 ~ 10.9V
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
89%
13.8 ~ 16.2V
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +70℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 45℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 5)
EMC EMISSION
OTHERS
NOTE
UL60950-1, TUV EN60950-1 ,CCC GB4943 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3,GB9254 class B,GB17625.1
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
224.5K hrs min.
DIMENSION
215*115*30mm (L*W*H)
PACKING
0.72Kg; 15pcs/11.8Kg/0.78CUFT
MIL-HDBK-217F (25℃)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
6. For charging related applications, please consult Mean Well for details.
7. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: RSP-200-2.5/-3.3/-4/-5/-7.5/-12/-13.5/-15)
File Name:RSP-200-SPEC 2016-12-23
RSP-200
200W Single Output with PFC Function
series
■ Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
1U low profile 30mm
Optional conformal coating models (RSP-200-□CC)
LED indicator for power on
3 years warranty
SPECIFICATION
MODEL
OUTPUT
RSP-200-13.5
RSP-200-15
RSP-200-24
RSP-200-27
RSP-200-36
RSP-200-48
DC VOLTAGE
13.5V
15V
24V
27V
36V
48V
RATED CURRENT
14.9A
13.4A
8.4A
7.5A
5.56A
4.2A
CURRENT RANGE
0 ~ 14.9A
0 ~ 13.4A
0 ~ 8.4A
0 ~ 7.5A
0 ~ 5.56A
0 ~ 4.2A
RATED POWER
201.15W
201W
201.6W
202.5W
200.16W
201.6W
240mVp-p
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
200mVp-p
220mVp-p
VOLTAGE ADJ. RANGE
13.5 ~ 18V
20 ~ 26.4V
26 ~ 31.5V
32.4 ~ 39.6V
41 ~ 56V
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
12 ~ 15V
VOLTAGE TOLERANCE Note.3 ±1.0%
LINE REGULATION
±0.3%
±0.3%
±0.2%
±0.2%
±0.2%
±0.2%
LOAD REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
1500ms, 50ms/230VAC
HOLD UP TIME (Typ.)
8ms at full load
90%
90%
Note.4 88 ~ 264VAC
VOLTAGE RANGE
FREQUENCY RANGE
47 ~ 63Hz
INPUT
124 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY (Typ.)
89%
2.5A/115VAC
89.5%
1.3A/230VAC
20A/115VAC
40A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
PROTECTION
3000ms, 50ms/115VAC at full load
230VAC /115VAC
PF>0.98/115VAC at full load
89.5%
89%
LEAKAGE CURRENT
<1mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
15.7 ~ 18.4V
18.8 ~ 21.8V
27.6 ~ 32.4V
32.9 ~ 38.3V
41.4 ~ 48.6V
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
58.4 ~ 68V
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +70℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 45℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 5)
EMC EMISSION
OTHERS
NOTE
UL60950-1, TUV EN60950-1 ,CCC GB4943 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3,GB9254 class B,GB17625.1
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
224.5K hrs min.
DIMENSION
215*115*30mm (L*W*H)
PACKING
0.72Kg; 15pcs/11.8Kg/0.78CUFT
MIL-HDBK-217F (25℃)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
6. For charging related applications, please consult Mean Well for details.
7. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: RSP-200-2.5/-3.3/-4/-5/-7.5/-12/-13.5/-15)
File Name:RSP-200-SPEC 2016-12-23
RUSSPP--2320205
200W Single Output with PFC Function
Mechanical Specification
Case No.207B
ssee rr iieess
Unit:mm
215
32.5
150
LED
+V
ADJ.
9
8
50
115
9.5
135
4-M4 L=3mm
7
6
5
4
32.5
8
3
2
16
1
15
32.5
150
Terminal Pin No. Assignment :
12.5
30
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
Pin No.
Assignment
4~6
DC OUTPUT -V
7~9
DC OUTPUT +V
4-M4(Both Sides) L=5mm
Block Diagram
PFC fosc : 100KHz
PWM fosc : 100KHz
ACTIVE
INRUSH
CURRENT
LIMITING
EMI
FILTER
I/P
RECTIFIERS
FG
O.L.P.
RECTIFIERS
&
FILTER
POWER
SWITCHING
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
O.T.P.
Derating Curve
Static Characteristics
100
100
2.5V~4V
90
80
80
70
5V~48V
LOAD (%)
LOAD (%)
60
40
20
-30
+V
-V
60
50
40
0
10
20
30
40 45 50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
88
90
95
100
115
135
155
175
195
230
264
INPUT VOLTAGE (VAC) 60Hz
File Name:RSP-200-SPEC 2016-12-23