Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
MCQ WITH ONLY ONE
ALTERNATIVE CORRECT:
You may apply various techniques, like:
1.Elimination
2.Checking for extreme condition
3.Putting specific values in expression
4.Checking dimensions
There are various scopes of errors also.
Usually there are alternatives for
corresponding mistakes.
In using short techniques, you may make
mistake because of lack of practice.
MCQ WITH MORE THAN ONE
ALTERNATIVE CORRECT
Here also you may use few techniques like
elimination, dimension checking etc.
In these types of questions your depth of
understanding is being tested…so very clear
concepts are needed to do such kind of
problems.
In these kind of questions every alternative
should be read carefully.
Sometimes some words may be
misleading…like only, never, sometimes, can
be, can not be…
These small things may lead to a mistake,
even one knows the correct answer.
ASSERTION REASON
You will be given two statements…and you will have
to check the correctness of statements as well as
the relation between those.
Clear concepts are required to solve these type of
questions.
Here also you may find misleading statements.
MATCH THE FOLLOWING
Usually part marks are awarded for such kind
of questions.
Sometimes you may need to check all
possible combinations.
-unit of force may be Newton as
well as Tesla-Ampere-Meter .
ANSWER AFTER READING THE
PASSAGE…
Here your comprehension skills will be checked.
Some new terms, rules or phenomena may be
defined.
- pomentum=mass * speed;
- there may be universe in which
gravitational force is inverse of ‘r’ .
- A $ B=A2 + B;
-A ~ B=A3 – B2;
For doing these kind of questions you may be
thorough with derivation of formulae.
Limitation of formulae should also be taken
into account.
-you can’t use normal fringe width
formulae, if ‘D’ is comparable to ‘x’.
82. In the interval [0, 1], the mean value theorem is NOT
applicable to the function
(A) f (x) =1/2-x
x<1/2
= (½-x)^2 x>=1/2
(B) f(x) = (sin x)/x
=
1
(C) f (x) = x|x|
(D) f (x) = |x|
ANS: A
x ≠0
X=0
The orthocenter of the triangle with vertices
(0, 0), (4, 0) and (3, 4)
(A)(5/4,-4/3)
(B) (3, 12)
(C)(3,5/4 )
(D) (3,3/4)
59. If the angles of a triangle are in the ratio 4 :
1 : 1, then the longest side and the perimeter are
in the ratio
(A) 3 : 2 + 3
(B) 1: 6
(C) 1 : 2 + 3
(D) 2 : 3
83. Two numbers are drawn at random, one
after another and without replacement, from
the set {1, 2, 3, 4, 5, 6}. The probability that
minimum of the chosen numbers is smaller
than 4 is
(A) 1/15
(B) 14/15
(C)1/5
(D) 4/5
5. The edge of a cube is measured to be 1.2
102m. Its volume should be recorded as
(A) 1.7 106 m3. (B) 1.73 106 m3.
(C) 1.70 106 m3.
(D) 1.728 106
m3.
QUESTION
1.A body is kept such that its centre of mass
lies on X-axis. Its moment inertia about an
axis passing through (x,0)& parallel to y-axis
is given by I=X2 -2X+2(0<X<4). Find the xcoordinate of CM.
A.2
B.1
C.5
D.3
2: A charge vs. time graph is plotted for a d.c.
flow, where this charge is the charge flown
through a cross section of wire continuously.
Which is the most correct option for the graph
(1)this can be a straight line graph
(2)this can be a circle
(3)this can be any continuous graph
(4)this will always be a discontinuous graph