Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Page 1 Dome Camera Vicon® Industries V926 FIXED DOME VANDALPROOF COLOR CAMERA SERIES SECURITY SYSTEM 28 23 00 VIDEO SURVEILLANCE PART 2 - PRODUCTS 2.01 GENERAL A. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer’s system. B. All systems and components shall have been thoroughly tested and proven in actual use. C. All systems and components shall be provided with the availability of a toll free 24hour technical support phone number from the manufacturer. This no charge service shall be available to dealers, installers and end users. D. All systems and components shall be provided with an explicit manufacturer warranty. 2.02 FIXED DOME VANDALPROOF COLOR CAMERA SERIES A. The fixed dome, color camera shall incorporate a fixed camera/lens combination with a 3.3-12 mm varifocal lens. The analog camera domes shall be available as indoor/outdoor models. The cameras shall offer in-ceiling mounting or in-soffit mounting. B. The cameras shall be available in color and day/night models. C. The color camera shall have a resolution of 560 TVL. Built-in digital noise reduction shall improve image quality in low-light environments. Privacy masking shall provide the ability to mask out selected regions of the screen. A Highlight Mask feature shall mask bright spots in a scene, providing better overall clarity. D. The cameras shall be constructed with a metal housing with a smoked, high-impact, polycarbonate plastic dome and black mask. All camera models shall be protected with tamper-resistant screws. E. The cameras shall offer coaxial, UTP or fiber video transmission. F. The cameras shall have an internal heater, powered by 24 VAC input power. G. The camera position shall have a three-axis adjustment, allowing for adjustment of pan (360°), tilt (70° from vertical) and lens rotation (roll), for any angle of view required. H. The camera shall be designed for easy installation and setup. The extensive onscreen display menus shall allow set up of white balance, AGC, backlight compensation, exposure, privacy masks and many other functions. I. 478195017 A PAL model shall be available. 7/3/17 Page 2 2.03 Dome Camera FIXED DOME CAMERA AND OPTICS SPECIFICATIONS A. B. Imaging Device: Picture Elements: C. Sensitivity- Color Model: Sensitivity- Day/Night Model: D. E. F. G. H. I. O. P. Q. Video Output: Horizontal Resolution: S/N Ratio: Synchronization: Automatic Gain Control (AGC): Backlight Compensation: Flickerless: Privacy Mask: Sense Up: Digital Noise Reduction: Iris Control: White Balance: Shutter Speed: R. S. T. Focal Length: Aperture: Field of View: J. K. L. M. N. 2.04 2.05 1/3-inch CCD 2:1 interlace, NTSC/PAL. NTSC: 811 (H) x 508 (V) 410,000 pixels. PAL: 795 (H) x 596 (V) 470,000 pixels. 0.01 fc (0.14 lux) with f/1.2 lens at 30 IRE. Color: 0.01 fc (0.14 lux) with f/1.2 lens at 30 IRE; B&W: 0.001 fc (0.01 lux) with f/1.2 lens at 30 IRE. 1.0 V p-p @75 ohms, composite. 560 TV lines; 600 TV lines B&W. 50 dB (AGC off). Internal/External. Selectable: Off, Low, Middle, High. On/Off. On/Off. 6 zones/size. Off/Auto (X2 - X256). Selectable: Off, Low, Middle, High. Automatic. Automatic/Manual, Red/Blue Gain Level. NTSC: 1/60-1/100,000 sec. PAL: 1/50-1/100,000 sec. 3.3-12 mm. f/1.2. Horizontal: 83.9°-23.91º/ Vertical: 61.9º-17.93º. ELECTRICAL SPECIFICATIONS A. B. Input Voltage: Current: 24 VAC (20-27 VAC) isolated. 0.5 A nominal; 0.6 A nominal with heater. C. D. Power Consumption: Connectors: 12 W nominal; 17.4 W nominal with heater. Power: 3-pin terminal block. Video: BNC or UTP. Heater: 2-pin connector. VIDEO TRANSMISSION SPECIFICATIONS A. B. 478195017 Maximum Transmission Distance: Video Output Impedance: Coaxial: 1100 ft (335 m), cable dependant. UTP: 500 ft (passive receiver) to 1000 ft (active receiver) (152 to 305 m). 75 ohms. 7/3/17 Page 3 2.06 Dome Camera OPERATIONAL A. Control Display: B. Tilt and Horizontal Adjustment: C. 2.07 B. C. 2.09 Pan, 360°; tilt, 70° from vertical and rotation about its axis (roll/azimuth). Focus: focus lever screw. Zoom: zoom lever screw. ENVIRONMENTAL SPECIFICATIONS A. 2.08 Lens Adjustment: On-screen, menu-driven system allowing full configuration of the camera Operating Temperature: Humidity: Storage Temperature: 14 to 131° F (-10 to 55° C). Up to 90% relative, non-condensing. -4 to 158° F (-20 to 70° C) maximum. MECHANICAL SPECIFICATIONS A. Construction: B. Dimensions: C. D. Weight: Camera Mount: Metal housing with smoked polycarbonate plastic dome and black mask. Height: 4.1” (104 mm ) above ceiling. 3.4” (86 mm) below ceiling. Total Diameter: 6.44” (155 mm). Dome Diameter: 4.73” (120 mm). 2.25 lb (1.02 kg) Indoor/outdoor. In-ceiling or in-soffit mount with 4 x 4 electrical box/bracket. CERTIFICATIONS A. CE B. FCC, Class A 2.10 WARRANTY A. 3 years, parts and labor. 2.11 APPROVED MANUFACTURERS A. The fixed dome, color camera shall be Vicon Model V926 Series. END OF SECTION Vicon is a registered trademark of Vicon Industries Inc. in the United States and other countries. 478195017 7/3/17