Download MODEL A - i-STS

Model A
19-inch Rack
Static Transfer
Switch
Why choose a model A
static transfer switch?
•
•
•
•
•
•
•
•
•
•
Break before make transfers
Break time < ¼ Cycle
Will not transfer faults
Small 1RU Design
Passively Cooled
One touch transfer
Better than relay based
Voltage free contact
Preferred source selector
Supported current up to 32A
Features
• Fast, reliable switching
• Transparent transfer – less than ¼ cycle.
• Solid state devices are far superior to their electro-mechanical equivalents.
• Dual redundant internal power sources.
Weight and Dimensions
Width: : 483mm, 19” Rack
Height: 44mm, 1.7”
Depth: 285mm, 11.2”
Weight (typical): 2.5Kg, 5 lb
Features
• Real time monitoring
•
•
•
•
•
Simple mimic status.
Simple Load indicator LEDS.
Preference LEDS.
Visual and Audible Alarm.
Remote Contact.
Features
• Programmable logic control
•
•
•
•
Fast internal communication.
All variables are easily set in software.
Constantly monitors for alarm conditions.
Intelligent transfers.
Features
• Flexible input/output configurations
• 2 IEC C19 Inlets or Terminals
• 2 IEC C20 Outlets and 8 IEC C13 Outlets
Specification
Specification
Type
Current Rating
2-pole / 1-phase
16A
32A
Nominal
Voltage
115V to 230V +- 20%
Fault Current
1kA for 20ms, 100A Fused
Frequency
50 / 60Hz (auto detection)
THD
15%
Power Factor
No Limit
Crest Factor
3.5:1
Overload
Capacity
80A for 30 sec.
100A for 1 sec.
1,000A for 20 ms.