Download LED dimmer

LED dimmer
JB-DM9102
Features
◆1channel, max.3~36W
◆ No flicker, 1-10V dimming.
◆ High frequency PWM output, smooth dimming.
Specifications
Input ： DC12-48V
Output ：1CH
Power：36W
Controlling signal：1-10V
HZ ：﹥5KHz
Weight：210g
Size ：1*48 (L364*W334*H158mm)
Dimming curve
Update2011-11-10
Page 1 of 3
JB-DM9102-V1.0
Product operation
According to product connection diagram, an active 0/1-10 V pressure regulator,
or passive 1-10 V dimmers, LED load and power supplies are aligned according
to have in the right to the port, open the power supply, regulation 0/1-10 V
pressure regulator, which changes the output of the controller, until they get the
satisfactory LED output brightness so far.
When the 【Analog IN 】port impending, controller all light output; When the
【 Analog IN 】 port two terminals short circuit, the output shut down.
Dimension
Update2011-11-10
Page 2 of 3
JB-DM9102-V1.0
Wiring
Note:
1. Please choose to surge of smooth curve 1-10 V dimmers, otherwise may
directly affect the smoothness of the LED light
2. This product constant current driver using step-down design way, the power
supply voltage must be over load of VF value LED combined, Uin > 4 vUvf
3, If on a bus and pick up more JB-DM9102 dimmer drive, please make sure good
dimmer switches with the effective load capacity
Update2011-11-10
Page 3 of 3
JB-DM9102-V1.0