* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download I need to indicate flow pulse signals (10,000 pulses/hour) at two
Survey
Document related concepts
Power inverter wikipedia , lookup
Stray voltage wikipedia , lookup
Phone connector (audio) wikipedia , lookup
Flip-flop (electronics) wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Buck converter wikipedia , lookup
Oscilloscope history wikipedia , lookup
Analog-to-digital converter wikipedia , lookup
Chirp compression wikipedia , lookup
Power electronics wikipedia , lookup
Time-to-digital converter wikipedia , lookup
Schmitt trigger wikipedia , lookup
Pulse-width modulation wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Transcript
EAP-031042 I need to indicate flow pulse signals (10,000 pulses/hour) at two independent integrating counters. Maximum input to each counter is 500 pulses/hour. You have to first scale the flow signal of 10,000 pulses/hour down to 500 pulses/hour (1), and then distribute the pulse output to two counters (2). See the system configuration below. (1) Frequency Scaler (model PRU, KPRU, etc) In order to convert 10,000 pulses into 500, set the scaling factor to 0.5 x 10-1. You can set the factor with front-mounted rotary DIP switches. Input: mechanical contact, open collector or voltage pulse Output: open collector, relay contact or voltage pulse Scale: 0.9999 x 100 – 0.0001 x 10-6 (PRU/KPRU) (2) Pulse Isolator (model KMT) It provides two isolated contact output signals. Input: mechanical contact, open collector Output: relay contact, open collector M-System has flexible solutions to meet your specific application and requirements. Consult our Signal Conditioners Data Library. ■ 5-2-55, Minamitsumori, Nishinari-ku Osaka 557-0063 JAPAN / Tel: +81(6) 6659-8201 / Fax: +81(6) 6659-8510