Download Light Card Capabilities Form

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Transcript
Light Card Capabilities Form – User Guide
v1.11 – January, 2013
1.
Purpose of this document
As part of the Vendor Product Approval Process, the Light Card Capabilities Form aims at gathering in a very
synthetic document the features required to request a Letter of Approval in case the product already passed the
Interface and Application Testing and the Compliance Assessment and Security Testing.
In other words, a Card Vendor must submit this form if it wants to request a Letter of Approval for a product that
already passed the aforementioned steps.
This Light Card Capabilities Form (Light CCF) shall be provided to MasterCard in a Microsoft Word format only at:
[email protected]
This form does not require the Vendor to define the value of the parameters of the application but we warn the
Vendor that the parameters shall have the same values as the ones used to personalize the product for the Interface
and Application Testing during the initial approval. Therefore we consider that when providing the Light CCF the
Vendor acknowledges that the configuration of the product is strictly identical to the one used during the initial
approval. The parameters will still be checked during the CPV session.
This document will provide explanations over several fields of the Light CCF and help the Vendors to fill it in.
2.
Product Identification
Filename of the Light CCF
The name of the product and the version of the Light CCF (not the template version) shall appear somehow into the
filename. This version is very helpful to track the updates. This version shall be incremented into the filename for
each update of the Light CCF.
A5. Product Technical Name and Version
This field provides the name and the version that will be used to identify the product. Name and version have to be
unique. Therefore we will not accept name and version strictly identical to the ones of the father product.
When the name of the product is inspired with the name of the father product we recommend adding into this field a
few characters identifying the Vendor itself.
A6. Product Commercial Name and Version
There is no constraint about this field.
A6b. Product Name and Version used for CAST registration
The value of this field must be the same as the one that appears under the field ‘Master Product Name’ of the Cast
Certificate.
A8 vs. A8b.
A8 defines the specification used for the development of the payment application while A8b defines how the product
will be used in the field.
E.g. a Vendor might want to get an M/Chip 4 LoA for a product based on an application developed according to the
PayPass – M/Chip 1.3.1 specification.
A28. Update History
Any updated field shall be indicated in field A28. This field will be used to quickly track the changes from one file
version to another.
A29. Integrated Circuit licensed by Cryptography Research Inc.
The checkbox in field A29 aims at confirming that the Integrated Circuit used in your product has been licensed by
Cryptography Research Inc.
Light CCF User Guide – v1.10 – July 4, 2011
©2010 MasterCard Worldwide
Page 1/2
3.
Product Definition
A22. Registration Number of the father product
Registration Number of the product which passed the IAT and CAST.
4.
Technology Identifier
T1. Product Type
This field defines the manufacturing model used for the product




CT: Usual EMV Contact only ID-1 card model
CL: Usual PayPass – Mag Stripe Contactless only ID-1 card model
DI1: Dual Interface ID-1 card model where the chip is embedded after card body manufacturing (currently
usual ID-1 product)
DI2: Dual Interface ID-1 card model where the chip is added to inlay before lamination
Suffixes ‘-DIS/C’ and ‘-DISP/U’ respectively refer to Connected and Unconnected Display Cards.
Components identification table

The following table shows which lines have to be filled in according to the Product Type:




CT: lines ‘Chip’, ‘Module’, ‘Card Body’ and ‘Embedding’ have to be filled in
CL: lines ‘Chip’, ‘Module’, ‘Antenna’, ‘Inlay’ and ‘Lamination’ have to be filled in
DI1: lines ‘Chip’, ‘Module’, ‘Antenna’, ‘Card Body’ and ‘Embedding’ have to be filled in
DI2: lines ‘Chip’, ‘Module’, ‘Antenna’, ‘Inlay’ and ‘Lamination’ have to be filled in
Component Identification
CQM Label
CT
CL
DI1
DI2
Chip
IC
x
x
x
x
Module
ICM
x
x
x
x
Antenna
n/a
x
x
x
Inlay
PIL
x
x
Lamination
PIC
x
x
Card Body
CB
x
x
Embedding
ICC
x
x

Lines that do not have to be filled in must be cleared (they shall not contain any information).

Only the pertinent information must be filled in. No additional wording shall be added.

The default value into the ‘Label’ column refers to the CQM workshop involved and then is the first digit of the
label to fill in.

‘Supplier’: We request the name of the company performing the manufacturing, not the name of a company
that would request the manufacturing

‘Production Site (City / Country)’: We request to fill in only the name of the city and the country where the
manufacturing facility is. E.g.: ‘Waterloo / Belgium’

‘Component (Name / Version)’: We request the version number of the component as well when available. We
always require the Revision of the chip.
T26. Antenna size for ID-1 products
A MasterCard product supports 4 lines of embossing. Therefore with regular technologies a full antenna allows 3
lines of embossing while a half antenna allows 4 lines.
Light CCF User Guide – v1.10 – July 4, 2011
©2010 MasterCard Worldwide
Page 2/2