Download BK267 - Governors America Corp.

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Transcript
30 Years Strong!
GAC APPLICATION NOTE
Document Title:
Customer / OEM:
Application(s):
Engine Make / Model / Displacement /
Rating:
Equipment Make / Model:
Fuel System Type & Make / Model:
Operating Speed(s):
Battery Voltage:
Installed or Recommended Products:
Summary / Details / Notes:
Adapter to Convert a Woodward Dyna 8000 Series to GAC 225 Series
Actuator
Various
Power-Generation, Industrial, Agricultural, Marine, Off-Road Vehicles
Diesel or Gaseous
Application dependent
12 or 24VDC
Speed Controls: ESD2210, ESD5500E, ESD5500-II, ESD5111, ESD5550,
Actuator Mating Connector: Packard - EC1300, Military - EC1000
(straight) & EC1010 (90 degree)
Actuator Mating Harness: 6’ Packard – CH1215 & 30’ Packard – CH1212
Packard, or 12’ Military - CH1203 (Straight) / CH1210 (90 degree)
Replacing a Woodward Dyna 8000 Series actuator with a GAC 225 Series
is simplified with this adapter. The original mounting kit can still be used
as the shaft of the 225 series actuator will be in the exact same position as
the old Woodward unit. The adapter lets you mount a 225 in either
direction to replace a CW or CCW rotation 8000 series actuators.
Photos / Images / Drawings:
1 – Woodward Dyna 8000 to GAC 225 Series Actuator Adapter
GAC: 225 Series
Dyna 8000 Series
Rev A_16-May 2016
Torque
Ft-Lbs
Nm
2.2
2.7
1
1.4
Shaft
Nominal Steady
Nominal Steady
Rotation State Current - 12V State Current - 24V
25°
3.0 Amps
1.5 Amps
35°
3.5 Amps
1.5 Amps
Page 1 of 1