Download power filters high performance emi filters - ETS

POWER FILTERS HIGH PERFORMANCE EMI FILTERS
ETS-Lindgren’s Model N900X Power Filters
are high performance EMI power filters
for use in EMC and Data Center/IT applications as well as any other installation
which requires maximum protection from
mains bourne interference.
The N900x Series Filters are all RF sealed
in high quality stainless steel cases and
include multi stage filtering for significant
filtering performance. The load current
must return to the dedicated neutral in
order to maintain maximum performance.
Solid and permanent earthing of the
filter case is essential for safety reasons
and to ensure optimum performance.
All ETS-Lindgren filters are CE marked
for compliance with the Low Voltage
Directive.
MODEL N900X
dB Insertion Loss from 9 kHz
up to 40 GHz
Insertion Loss
The N900x range provides 100 dB from
9 kHz to 40 GHz.
Low Power Dissipation
These filters offer very low power dissipation and a case temperature rise of 25°C at
full load.
Current Range
The N900x range offers current ratings
from 16 Amps to 200 Amps in both Single
Phase + N and Three Phase + N.
Voltage Drop
The Voltage drop at full load is below 2 %.
■■100
■■Low
Applications
■■High Performance
Screened Rooms
Power Dissipation
■■Compact,
■■Current
Rugged Construction
Range 16 to 200 Amps
■■Anechoic Chambers
■■Fitted
with Transient Suppressors
as a Standard
■■Stainless
Standard Configuration
■■Transient Suppressor’s
Fitted as Standard
■■Supplied with Fixing Kit
■■Alternative Transient
and Penetrations
■■Reverb Chambers
■■Computer Suites/Data Centers
Steel Constructions
Options
■■Custom Cable Entry and Exit
Locations Available on Request
Suppressors Available as
Required
■■Dedicated Neutral
■■EMC Applications
■■General Purpose High
Performance Filtering
Technical Specifications
Electrical
N9000
N9001
N9002
N9003
N9004
N9005
N9006
N9007
N9008
N9009
Current Maximum
16 A
16 A
32 A
32 A
63 A
63 A
100 A
100 A
200 A
200 A
Leakage Current
240 V, 50 Hz
0.905 A
0.061 A
1.282 A
0.0851 A
1.282 A
0.0851 A
1.772 A
0.1181 A
4.22 A
0.0281
Leakage Current
110 V, 60 Hz
0.498 A
0.061 A
0.705 A
0.0851 A
0.705 A
0.0851 A
0.975 A
0.1181 A
2.322 A
0.0281
Voltage Maximum
Frequency
Lines
250 V
250/400 V 250 V
250/400 V 250 V
250/400 V 250 V
250/400 V 250 V
250/400 V
DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz DC to 60 Hz
2
4
2
4
2
4
2
4
2
4
With 3-phase filters, the leakage currents will be 120o out of phase and will largely cancel as a result. The resultant leakage current will depend on how well the line capacitance and phase voltages are matched. The resultant leakage current is typically less than 5 mA per μF.
1
ets-lindgren.com
POWER FILTERS HIGH PERFORMANCE EMI FILTERS
N9000X Insertion
Loss Performance
N9000 Power Filter
N9001 Power Filter
ets-lindgren.com
POWER FILTERS HIGH PERFORMANCE EMI FILTERS
N9002 Power Filter
N9003 Power Filter
N9004 Power Filter
ets-lindgren.com
POWER FILTERS HIGH PERFORMANCE EMI FILTERS
N9005 Power Filter
N9006 Power Filter
N9007 Power Filter
ets-lindgren.com
POWER FILTERS HIGH PERFORMANCE EMI FILTERS
N9008 Power Filter
N9009 Power Filter
ets-lindgren.com
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications.
6/15 - RR/PDF © 2015 ETS-Lindgren v.1.0