Download Product Brief (PDF577KB)

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Transcript
Optical Camera Link Cable Assembly
for Full Configuration (8bit - 8tap)
FOCLF Series
FEATURES
 Full configuration (8bit - 8tap)
used with FOCLB series cable assembly (Note 1)
 Enables 100 m transmission without extender/repeater
by transmitting image signals over optical fiber
 High flex cycles cable available as an option
Note 1: This cable alone or two pcs of this cable cannot operate as Full configuration.
GENERAL SPECIFICATIONS
Parameters
Descriptions
Configuration
Full Configuration (8bit - 8tap)
Camera Clock Rate
20 ~ 85 MHz
Transmission Length
Max 100 m (Note 2)
Cable Type
Standard / High Flex Cycles
Electrical Connector
MDR Straight Plug / SDR Straight Plug / SDR Right-angled Plug (Camera-side only)
Power Supply Voltage
+12 V DC
Power Supply Type
PoCL Power Supply (Note 3) / External Power Supply
Flex Life (Slide Bending) Under testing for high flex cycles cable
Power Consumption
1.80 W (Typ.)
Note 2: Maximum transmission distance for PoCL is 30 m. Please consult us for the detail.
Note 3: PoCL type cable can be used for Full side port of Camera and Grabber board
if both Full side port of them support PoCL power supply. Please consult us for the detail.
SYSTEM CONFIGURATION EXAMPLES
Full Configuration (non-PoCL)
+12 V
Power Supply
Base-side Optical Camera Link Cable Assembly
FOCLB Series (Soled separately) +12 V
Power Supply
Full-side Optical Camera Link Cable Assembly
FOCLF Series (This product)
Non-PoCL type
Full Configuration Camera
Power Supply to Camera
Full Configuration
Grabber Board
Full Configuration (Example for Base-side connector of Camera being PoCL)
Base-side Optical Camera Link Cable Assembly
FOCLB Series (Soled separately)
+12 V
Power Supply
Full-side Optical Camera Link Cable Assembly
FOCLF Series (This product)
PoCL type
Full Configuration Camera
Full Configuration
Grabber Board
CONNECTOR
DIMENSIONS
MDR
Straight Plug
SDR
Straight Plug
[unit: mm]
BLOCK DIAGRAM (Example for PoCL Base cable and non-PoCL Full cable)
X Image
Signals
P/S
X Clock
FOCLB Series
E/O
Grabber-board Side Connector
O/E
Optical Fiber
MCU
Serial
Communication
Camera Ctrl
(CC1~4)
+12 V (PoCL)
GND
S/P
X Image
Signals
X Clock
MCU
Serial
Communication
Camera Ctrl
(CC1~4)
+12 V (PoCL)
GND
Optical Fiber & Metal Hybrid Cable
Base-side Connector
Base-side Connector
Camera Side Connector
Y Image
Signals
P/S
O/E
E/O
Optical Fiber #1
Optical Fiber & Metal Hybrid Cable
Z Image
Signals
P/S
E/O
O/E
Optical Fiber #2
Y Image
Signals
Y Clock
MCU
MCU
Y Clock
S/P
S/P
Z Image
Signals
Z Clock
Z Clock
GND
GND
GND
Full-side Connector
Full-side Connector
FOCLF Series
+12 V (External Power Supply)
ORDERING INFORMATION
For full configuration application, both FOCLF cable and FOCLB cable are needed.
e.g.) Base-side: FOCLBN-20S-MPS-MP
Full-side: FOCLFN-20S-MPS-MP
[Length]
01, 03, 05, 07, 10, 15,
20, 30, 40, 50, 60, 70,
80, 90, A0 (=100m)
[Camera-side connector]
MDR: M
SDR: S
Straight: S
Right-angle (camera-side only): R
[Right-angle Orientation]
[Configuration]
14-26 pin side (Down): D
1-13 pin side (Up): U
Full: F
FOCLFN-20S-SPRD3-MP
FOCLFP-20D-MPS -SP
[Power Supply]
Non-PoCL: N
PoCL (Note 4): P
Plug (male): P
[Cable]
Standard: S
High Flex Cycles: D
For N, select side where wires
for power supply are fitted.
Plug (male): P
MDR: M
SDR: S
[Grabber-side connector]
Standard (Wires on Grabber-side): blank
Wires on Camera-side: 3
Note 4: PoCL type cable can be used for Full side port of Camera and Grabber board
if both Full side port of them support PoCL power supply.
Fujikura Ltd.
Datacom Products Department
1-5-1, Kiba, Koto-ku, Tokyo 135-8512, Japan
Phone: +81-3-5606-1473
Fax: +81-3-5606-1598
E-mail:
www.fujikura.co.jp
June, 2013
CC93-11-13-0053(1)
Contents are subjected to change without notice.
Copyright © 2013 Fujikura Ltd. All right reserved.
Similar