Download Name:_____________ Chemistry 114 Second Hour Exam

Name:_____________
(4 points)
Chemistry 114
Second Hour Exam
Remember- Show all work for partial credit
1. (12 points) Tell my why:
HF has a higher boiling point than HCl.
HF will form intermolecular hydrogen bonds, HCl won’t; this will give HF stronger
intermolecular interactions and give it a higher boiling point.
I2 has a lower vapor pressure than Cl2 at room temperature.
I2 is larger that Cl2, this will make its London force larger to give it stronger
intermolecular interactions and make it harder to go into the vapor phase, thus lowering
its vapor pressure.
NaCl has a lower melting point than MgS.
Both are ionic and the ions are the same size, but MgS had +2 and -2 ions,
making its lattice energy stronger so it will have stonger interaction in the solid and a
higher melting point.
H2S is a gas and H2O is a liquid at room temperature.
H2O can form intermolecular Hydrogen bonds, H2S can’t. This gives H2O
stronger intermolecular interactions that will hold the liquid together at room
temperature. H2S lacks these interactions so it can go into the gas phase at RT.
2. (12 points) What type of solid (Pick letter from right hand column) will each of the
following substances form?
Substance
Pick (A - F)
Solid
C (diamond) ___F____
A.
Ionic
CO2
___C____
B.
Molecular Network
I2
___C____
C.
Molecular
Mg
___D____
D.
Atomic - Metallic
CaCO3
___A____
E.
Atomic - Network
H2O
___C____
F.
Atomic - Group 8a
Ne
___F____
SiO2
___B____
3. (12 points) The vapor pressure of water at 25oC is 23.8 torr, and the heat of
vaporization of water is 43.9 kJ/mol. Calculate the vapor pressure of water at 50.oC.
4. (12 points) Make a phase diagram that is consistent with the following data:
At 1 atm this material is a black amorphous solid at temperatures less than
150K.
Its normal melting point is 150K.
Its normal boiling point is 200K.
It has a critical point at 300K and 20 Atm of pressure.
It can sublime at 100K and .5 Atm of pressure.
At 100K it undergoes a transition from a black amorphous solid to a clear
crystalline solid at 10 Atm of pressure.
Note: Once you plot the points
there are many different ways you
can make the lines to connect the
points, so one graph may not look
like another. I was checking to
see if the points were properly
located and the lines and phases
were consistent.
5. (12 points) The liquid in a automobile battery is 3.75M sulfuric acid and it has a
density of 1.23 g/ml
How much does 1 liter of this solution weigh?
Density = g/volume; Density ×Volume = Grams; 1.23g/ml ×1000 ml = 1230 g
How many moles of H2SO4 are in 1 liter of this solution?
3.75 M means that 1 liter contains 3.75 mol !
How many grams of H2SO4 and H2O are in 1 liter of this solution?
g H2SO4 = 3.75 mol × 98.07 g/mol = 368 g
Since the total mass of 1 liter is 1230 g, the mass of water must be 1230-368 = 862 g
What is the mass % of H2SO4 in this solution?
Using above numbers 368/1230×100% = 29.9% H2SO4
What is the Mole fraction of H2SO4 in this solution?
Moles H2SO4 = 3.75, moles H2O = 862 g x (1mole/18g) = 47.9 mol
Mole fraction H2SO4 = 3.75/(3.75+47.9) = .0726
What is the molality of H2SO4 in this solution?
m=moles/kg solvent = 3.75/.862 = 4.35m
6. A (8 points) At room temperature diethyl ether has a vapor pressure of 0.70 atm
while acetone has a vapor pressure of .31 atm. If I mix .5 moles of ether with .75 moles
of acetone, what is the vapor pressure of the resulting solution?
VPsolution = P1VP01 + P2VP02
= .5/(.5+.75)×.7 + .75/(.5+.75)×.31
= .4(.7) + .6(.31)
= .47 atm
6.B (4 points) If the above solution has a higher vapor pressure than you calculated,
would the solution have gotten hotter or colder when you mixed it?
Higher vapor pressure means a positive deviation from Raoult’s Law. Positive
deviations from Raoult’s Law come from solutions that have a negative )Hsolution.
A negative )Hsolution means that the solution got colder as it was mixed.
7. (12 points) Carbon tetrachloride has a freezing point of -23oC and a Kf of 5.03
C@kg/mol. If a carbon tetrachloride solution has a freezing point of -30 oC, what is the
molality of this solution?
o
)T = -23-(-30) = +7
)T = imKF; i=1 for this nonionic compound so:
7 = x (5.03)
X = 7/5.03 = 1.39 m
7. (12 points) Define the following terms
van’t Hoff factor :
A number that tell how many particles are formed when an ionic compound is
dissolved in solution.
heat of solution:
The heat energy that is gained or lost when two compounds are mixed to form a
solution.
Henry’s Law:
C=kP; C = concentration of a gas dissolved in a liquid, P the pressure of the gas
over the liquid, k is a constant that is different for every liquid and gas pair.
Semipermeable:
A barrier that will let some molecules pass while it prevents the passage of other
molecules.
Tyndall effect
Light that can be seen scattering off of a colloid because it is not truly in solution.
Osmosis
The movement of a molecule across a semipermeable membrane from an area
of high concentration to an area of lower concentration