Download Slide 1

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Transcript
Date of download: 4/29/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Filler Materials Used for Uniform Load Distribution at Boundaries During Structural
Biomechanical Testing of Whole Vertebrae
J Biomech Eng. 2005;128(1):161-165. doi:10.1115/1.2133770
Figure Legend:
(a) Mean compressive modulus of dental stone, Wood’s metal, and PMMA. * indicates the significantly lower modulus of PMMA. (b)
Mean yield stress of dental stone, Wood’s metal, and PMMA. Because failure of dental stone was brittle, failure stress is plotted
instead. * indicates the significant difference between Wood’s metal, and PMMA. Failure stress of dental stone was not included in
the statistical analysis. Error bars represent standard deviation.
Similar