Download NL-110-HO

Catalog Number:
Submied by:
Job Name:
Type:
NL-110-HO
Frosted Lens
1"
Aluminum Fixture
End Cap
1 1/16"
Specificaons
The Neotek NL-020 is a straight light eming diode fixture that is a stand alone fixture.
The fixture has an LED light strip mounted onto an aluminum extrusion with a wiring harness that plugs into a remote 12V power supply.
Extrusion: The extrusion will be made of aluminum. Extrusion comes standard mill finish, it can also be powder coated with colors.
LEDs: High output +/-50K binned chips, 12 volt operang. Consuming 4.4 was per foot and available in colors listed below. The chips and
circuitry are fastened to the aluminum fixture. The strips produce 550 lumens per foot. Angle of illuminaon is 120 degrees.
Power Supply: The power supply is a dimmable or non-dimmable solid state. The power supply is remote from the fixture in an accessible
area. The power supply has a 12 volt output and waage to be rated for 4.8 was per foot.
End Caps: There shall be a polypropylene end cap on exposed ends with or with out wire holes as needed.
Lens: The lens shall be made of polycarbonate and be frosted or white.
Color of LED Light:
24K White
28K White
30K White
Lens:
35K White
45K White
65K White
Red
Green
Blue
Amber
Voltage:
Frosted
White
120v
277v
Dimmed
Non-Dimmed
Quanty/Footage:
Job Informaon:
LED & Cold Cathode Lighng
1030 Dividend Rd
Midlothian, TX. 76065
(972) 775-3121
[email protected]
Date:
Page #:
RGB