Download 750W1000 - Axiom Test Equipment

Specifications
Features
750W1000
 750 Watts CW
 80MHz–1000MHz
The Model 750W1000 is a self-contained, aircooled, broadband, completely solid-state
amplifier designed for applications where instantaneous bandwidth and high gain are
required. Push-pull circuitry is utilized in all
high power stages in the interest of lowering
distortion and improving stability. The Model
750W1000, when used with an RF
sweep generator, will provide a
minimum of 750 watts of RF power.
The
Model
750W1000
is
equipped with a Digital Control
Panel (DCP) which provides both
local and remote control of the
amplifier. The DCP uses a color
LCD touch screen and a single
rotary knob to offer status reporting and control capability. The
display
provides
operational
presentation of Forward Power
and Reflected Power plus amplifier
status. Special features include a
gain control, internal automatic
level control (ALC) with front panel
control of the ALC threshold, forward and reflective RF sample
ports for precise power measure-
ments and RF output level protection. Protection is provided by DC current level sensing of
all output stages.
All amplifier control functions and status indications are available remotely in GPIB/IEEE488 format and RS-232 hardware and fiber
optic, USB and Ethernet. The buss interface
connector is located on the back panel and
positive control of local or remote operation is
assured by a keylock on the front panel of the
amplifier.
Housed in a single equipment rack, the
750W1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing,
watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via
a rear panel connector.
The 750W1000 has the ability to be upgraded
at a later date to the 1000W1000E.
The export classification for this equipment is
EAR99. These commodities, technology or
software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
750W1000
1100
1050
1000
950
900
Power (Watts)
850
Psat
800
P3dB
750
700
P1dB
650
AR RF/Microwave
Instrumentation
160 School House Rd
Souderton, PA 18964
215-723-8181
For an applications engineer call:800.933.8181
www.arworld.us
600
550
500
450
400
Freq. (MHz)
Specifications


750 Watts CW
80MHz–1000MHz
RATED OUTPUT POWER: 750 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3 dB compression:
Nominal 900 watts, 775 watts min up to 500 MHz,
725 watts from 500 to 1000 MHz
POWER OUTPUT @ 1 dB compression:
Nominal 750 watts, 700 watts min up to 500 MHz;
600 watts min from 500 to 1000 MHz
FLATNESS: ±1.5 dB maximum; ±1.0 dB typical
FREQUENCY RESPONSE: 80–1000 MHz instantaneously
GAIN (at maximum setting): 58.8 dB minimum
GAIN ADJUSTMENT (continuous range): 25 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum;
1.3:1 typical
OUTPUT IMPEDANCE: 50 ohms nominal
MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load
impedance. (See Application Note #27)
PRIMARY POWER (specify voltage): 200-240 VAC,
50/60 Hz, single phase, 3200 watts
CONNECTORS
RF Input:
Type N female, front panel
RF Output:
Type 7/16 female, rear panel
Forward sample: BNC female, front (-60 dBc)
Reverse sample: BNC female, front (-60 dBc)
Remote Interfaces:
IEEE-488
24-pin female
RS-232
9-pin Subminiature D, female
Fiber Optic
ST Conn Tx and Rx RS-232
USB 2.0
Type B
Ethernet
RJ-45
Safety Interlock: 15-pin Subminiature D, rear panel
COOLING: Forced air (self contained fans), enters
front and bottom
WEIGHT (approximate): 120 kg (263 lb)
SIZE (W x H x D): 50.3 x 108 x 83 cm (19.8 x 42.5 x
32.4 in)
EXPORT CLASSIFICATION: EAR99
MODULATION CAPABILITY: Faithfully reproduces AM,
FM, or Pulse modulation appearing on input signal.
HARMONIC DISTORTION: Minus 20 dBc maximum at
600 watts, -20 dBc typical @ 750 watts
THIRD ORDER INTERCEPT POINT: 64 dBm typical
NOISE FIGURE: 8 dB maximum, 6 dB typical
Graphs
Typical Gain @ -20 dBm input
70
69
68
67
66
Gain (dB)
750W1000
Page 2
65
64
63
62
61
60
Freq. (MHz)
Page 3
Graphs
750W1000
750W1000 Harmonics @ 750 watts
-10
750 Watts CW
80MHz–1000MHz
-15
-20
-25
-30
3rd
Power (Watts)
-35
-40
2nd
-45
-50
-55
-60
-65
-70
-75
-80
Freq. (MHz)
Typical Input VSWR
2
1.9
1.8
1.7
VSWR
1.6
1.5
1.4
1.3
1.2
1.1
1
Freq. (MHz)
Typical Noise Figure vs. Frequency
8
7.5
7
6.5
Noise Figure (dB)


6
5.5
5
4.5
4
3.5
3
Freq. (MHz)
To order AR Products, call 215.723.8181. For an applications engineer call:800.933.8181. Direct to Service call: 215.723.0275 or
email: [email protected] For Faxing Orders:866.859.0582 (Orders Only Please) [email protected]
Approved for public release by AR RF/Microwave Instrumentation
121113