Download curriculum vitae - Balqa Applied University

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Transcript
CURRICULUM VITAE
IDENTIFICATION:
NAME
NATIONALITY
DATE OF BIRTH
PLACE OF BIRTH
MARETIAL STATUS
ADDRESS
: Suleiman Qasim Mohammad Abu-Ein (Associate Professor)
: Jordanian
: 6th June 1966
: Irbid - Jordan
: Married
: Amman - Marka - Jordan
: 11134, P.O. Box 15008
Mobile : +962 777337266
Mail addresses: [email protected]
[email protected]
EDUCATION AND QUALIFICATION:
1- 1991 – 1994 Ph.D. Degree in Technical Sciences, (Machine Science and Machine
Components).
Thesis Title: " The Influence of Interaxial Drive Scheme on the Transmission load of the
Tractor MTZ – 82". Institute of Machines Operative Longevity, Belarus – Minsk.
2- 1985 – 1990 Diploma of Science in Engineering (Automobile, Repair and Maintenance of
Automobiles). Belarussian Polytechnic Institute, Belarus – Minsk.
1
EXPERIENCE:
1. Lecturer in Al-Husun Polytechnic College,
Mechanical Engineering Department, from 15/11/1994 to 10/02/1998.
2. Lecturer at Faculty of Engineering Technology, Al-Balqa' Applied University,
Mechanical Engineering Department, from 10/02/1998 till now.
3. Head of Mechanical Engineering Department, Faculty of Engineering Technology,
Al- Balqa Applied University, from 16/9/2001 to 20/9/2002 .
4. Assistant Dean for Training and Consulting, Faculty of Engineering Technology,
from 21/9/2002 To 15/9/2003.
5. Head of Mechanical Engineering Department, Faculty of Engineering Technology,
Al-Balqa Applied University, from 14/9/2006 to 1/9/2007.
6. Vice Dean for Academic Affairs, Faculty of Engineering Technology, Balqa Applied
University, from 16.09.2013 to 15.09.2014.
7. Vice Dean for Administrative Affairs, Faculty of Engineering Technology, Balqa Applied
University, from 16.09.2014 till now.
TRAINING COURSES:
1. Training Course in AutoCAD R-12 , May 1995, 60 Hours.
2. Training Course for using the latest Technology In Automobiles.
(Arabic Union for Technical Education).Damascus, Syria from 16 to 25/12/96.
3. Training Course for Vocational Training Instructors.
(Automotive Mechanical engineering), Polytechnic University – Japan.
From May 19/1997 to Dec. 18/1997.
4. Training Course in AutoCAD R-14, July 1998, 60 hours.
5. Training course in Autotronics (Automotive engineering and Electronics).
Al-Butaina Automotive Center.
6. Training Program fro “ Electronic Fuel Injection & Ignition Modern Training Devices (12
Hours). Quaismah Vocational Center. From 1st to 2d April 2003. Amman-Jordan.
7. Training course in Autotronics. Arabic Union for Technical Education in cooperation with AlHuson college, Al-Huson, 6 – 10 – 03 – 2005.
8. Training course in Automotive Technology (AUTOTRONICS). Elettronica Veneta &
INEL SPA, Italy, from 26th to 29th September, 2005.
9. Training course for: -Vehicle Diagnostic Tester (KTS 520), -BOSCH ESI-Tronic
Program. Amman – Jordan, BOSCH workshop, between 19-21 September 2006.
TEACHING SUBJECTS:
1. Internal Combustion Engines.
2. Engineering Drawing using AutoCAD.
3.. Mechanical Drawing.
4. Automotive Electrical and Electronic Systems.
5. Engineering Materials.
6. Metallurgy.
8. Automotive Engineering.
9. Automotive Electrical and Electronic Systems.
10. Fundamentals of Autotronics.
11. Hybrid Vehicles Technology.
2
PUBLICATIONS:
1-
Skoibeda A.T., S. Abu- Ein. “Reduction of dynamic loading of gear transmissions of the
tractor speed- changing box MTZ-82”. - Report theses at the Scientific- Technical
Conference problems gear transmissions and reduction gear construction. –Sevastopol,
1993.
2-
Skoibeda A.T., S. Abu-Ein. “Increasing reliability of drives of front driven axles of the
tractor “Belarus"”. Report theses at the scientific- technical conference “Increasing of
technical level and reliability of machines". Minsk, October 28-29, 1993-p.42.
3-
S. Abu-Ein. “Experimental Investigation of heat transfer coefficient in fluidized beds
with immersed heating surface”. 1st International Conference on Heat Transfer, Fluid
Mechanics, and Thermodynamics, 8-10 April 2002, Kruger Park, South Africa, Volume
1~Part 2, HEFAT2002.
4-
M. AL-Busoul, S. Abu-Ein. “Local Heat Transfer Coefficient Around a Horizontal
Heated Tube Immersed in a Gas Fluidized Bed”. Heat and Mass Transfer Journal 39
(2002) 355-358. Springer-Verlag, Germany.
5- Omar Al-Ayed, Suleiman Abu-Ein. “Variable Activation Energy to Model Oil Shale
Pyrolysis Kinetics”. 27th Oil Shale Symposium. October 15-19, 2007, Colorado School
of Mines, the Colorado Energy Research Institute, Golden, Colorado.
6-
Suleiman Abu-Ein. “The Effect of Soot Layer on Transmission Losses and Noise
Reduction Factor of a Diesel Particulate Fitter Unit”. Journal of Engineering Sciences,
Assiut University, Vol. 36, No. 4, pp. 799-812, July 2008.
7- Sayel M. Fayyad, Waleed Momani, and Suleiman Abu-Ein. “Mathematical Model of
Pneumohydraulic Brake with a Pressure Converter”. Journal of Engineering Sciences,
Assiut University, Vol. 36, No. 6, pp. 1413-1422, November 2008.
8- Suleiman Abu-Ein. “Numerical and Analytical Study of Exhaust Gases Flow in Porous
Media with Application to Diesel Particulate Filters”. American Journal of Engineering
And Applied Sciences 2 (1): 70-75, 2009.
9- Sayel M. Fayyad, Suleiman Abu-Ein and Waleed Momani. “The Lateral Reaction of a
Deformable Inclined Surface on a Wheel with an Elastic Trunk”. American J. of Applied
Sciences 6(5): 952-955, 2009.
10- Waleed Momani, Suleiman Abu-Ein, Montaser Momani and Sayel M. Fayyad. “ Effects of
Oxygenated Gasoline on Fuel and Air Mass Flow Rates and Air-Fuel Ratio”. American J.
of Applied Sciences 6(5): 974-977 , 2009.
11- Sayel M. Fayyad, Suleiman Abu-Ein, Qusai Abu-Ein, Ghazi Al-Marahleh and Nasr AlKloub. “Driving under Influence of Alcohol Preventer Embedded System”. Journal of
Applied Sciences Research, 5(10): 1381-1389, 2009, INSInet Publication. (URLICH),
http://www.ulrichsweb.com/ulrichsweb/
3
12- Qusai Abu-Ein, Suleiman Abu-Ein, Sayel M. Fayyad, Ghazi Al-Marahlehand and Waleed
Al-Momani. “Automobile Functions Control System via Bluetooth Utility". Australian
Journal of Basic and Applied Sciences, 3(4): 3273-3282, 2009, INSInet Publication.
(URLICH), http://www.ulrichsweb.com/ulrichsweb/
13- S.Q. Abu-Ein, S.M. Fayyad, Waleed Momani, Aiman Al-Alawin and Muntaser Momani.
“Experimental Investigation of Using MR Fluids in Automobiles Suspension Systems”.
Research Journal of Applied Sciences, Engineering and Technology 2(2): 159-163, 2010,
ISSN: 2040-7467, Maxwell Scientific Organization, 2010.
14- S.M. Fayyad, Waleed Momani, S.Q. Abu-Ein, Omar Juditawy.
“Experimental Investigation of Using Fuel Additives – Alcohol”. Research Journal of
Applied Sciences, Engineering and Technology 2(2): 164-169, 2010. ISSN: 2040-7467,
Maxwell Scientific Organization, 2010.
15- Suleiman Abu-Ein, Sayel M. Fayyad, Qusai Abu-Ein, Waleed Al-Momani, Ashraf A. AbuEin and Muntaser Al-Momani “Controlling Automobile Functions by the Phone as an
Embedded System”. Australian Journal of Basic and Applied Sciences, 4(7): 2134-2142, 2010
ISSN 1991-8178, 2010, INSInet Publication, INSInet Publication.
(URLICH), http://www.ulrichsweb.com/ulrichsweb/.
16- Sayel M. Fayyad, Suleiman Abu-Ein, Ghazi Al-Marahleh, M untaser Al-Momani, Zaid
Abulghanam, Omar Badran, and Taiseer Abu-Rahmah. “Experimental Emulsified Diesel
And Benzen Investigation”. Research Journal of Applied Sciences, Engineering and
Technology 2(3): 268 - 273, ISSN: 2040-7467, Maxwell Scientific Organization, 2010.
17- Suleiman Abu-Ein, Sayel M. Fayyad. “Effects of Temperature on Noise Reduction in
Diesel Particulate Filters (DPFs)”. 7th International Conference on Heat Transfer, Fluid
Mechanics and Thermodynamics.19-21 July 2010, Antalya, Turkey. HEFAT2010.
18- Sayel M. Fayyad, Suleiman Abu-Ein. “Nonlinear Flow in Porous Media with Applications
to Diesel Particulate Filters (DPFs)”. 7th International Conference on Heat Transfer, Fluid
Mechanics and Thermodynamics.19-21 July 2010, Antalya, Turkey. HEFAT 2010.
19- Muntaser Momani, Sayel M. Fayyad, Suleiman Abu-Ein, Waleed Momani, and Hisham
Mujafet " Computerized Mathematical Model for Studying Geometric Shape and Stresses
Applied on the Pistons’ Rings of ICE". Journal of Applied Sciences Research, 6(7): 905908,
2010,
INSInet
Publication
ISSN
1819-544X.
(URLICH),
http://www.ulrichsweb.com/ulrichsweb/
20- Suleiman Q. Abu-Ein, and Sayel M. Fayyad " Experimental Hydrogen Booster Model ".
World Applied Sciences Journal, 15 (8): 1168-1171, 2011, ISSN 1818-4952, IDOSI
Publications, 2011.
21- Suleiman Abu-Ein. " Numerical Investigation for the Effects of Shaft Misalignments on
Natural Frequencies of the Shafts". Material Science Research India, Oriental Scientific
Publishing Company, 8(2), 247 – 250 (2011), ISSN 0973-3469
4
22- Sayel M. Fayyad, Mohammad N. Hamdan, Suleiman Abu-Ein. " Four-Port Noise Model
for the Diesel Particulate Filters (DPF)". Jordan Journal of Mechanical and Industrial
Engineering, The Hashemite University. Volume 5, Number 6, Dec. 2011 ISSN 1995-6665
Pages 495 - 507.
23- Ghazi Al-Marahleh, Sayel Fayyad, Suleiman Abu-Ein, Ashraf Abu-Ein. "Virtual Digital
Retarders System". Computer Engineering and Intelligent Systems, Vol 3, No.7, 2012. ISSN
2222-1719 (Paper) ISSN 2222-2863 (Online), 2012. www.iiste.org.
24- Mohammed Abuzalata, Muntaser Momani, Sayel Fayyad and Suleiman Abu-Ein. "A
Practical Design of Anti-Theft Car Protection System Based on Microcontroller". American
Journal of Applied Sciences 9 (5): 709-716, 2012. ISSN 1546-9239
25- Sayel M. Fayyad, Mohammed Abuzalata, Muntaser Momani and Suleiman Abu-Ein.
"Optimization of the Electrical Motor Generator in Hybrid Automobiles". Adv. Theor. Appl.
Mech., Vol. 5, 2012, no. 3, 145 - 159
26- Sayel M. Fayyad, Ghazi S. Al-Marahleh, Suleiman Q. Abu-Ein. " Improvement of the
Refractoriness under Load of Fire-Clay Refractory Bricks". Adv. Theor. Appl. Mech., Vol. 5,
2012, no. 4, 161 - 172
27- Sayel M. Fayyad, Ibrahim Edwan, Waleed Momani, Suleiman Abu-Ein. "Extrusion Diagonal
Loaded of Centered Hole Sheet Metal Simulation and Analysis". IOSR Journal of
Engineering (IOSRJEN) e-ISSN: 2250-3021, p-ISSN: 2278-8719, Vol. 3, Issue 12
(December. 2013), ||V3|| PP 68-71 (Impact Factor 1.645)
5
1- PhD
6
2- Bsc.
7
8
9
Similar