PSW POWER TRAIN DISCRETE – DEVICE POWER LOSS AND ANALYSIS www.fairchildsemi.com/support/design-tools/ Save Weeks of Simulation, Comparison, Analysis on PFC, PSFB + SR Discretes The ability to dramatically accelerate discrete component selection and design for popular 100 W to 3,000 W power supplies is now available with Fairchild’s Power Supply WebDesigner (PSW). Our power factor and phase-shifted power train modules automatically select design-appropriate devices such as MOSFET, IGBT, rectifier and diode; display efficiency and power loss analysis; present a summary and BOM report; all based on your electrical and mechanical input specifications. Power engineers can then optimize component selections for their particular design by varying Fairchild device combinations as the software program quickly displays the new performance analyses and output results. Weeks of bench time can now be accomplished in a matter of minutes, at no expense. NP : NS : NS VOUT VIN IO Power Factor Correction Phase-Shifted Full Bridge Converter with Center Tapped Transformer Current Doubler Rectifier Option Also Available Optimized for Popular Controllers PSW Power Train Discrete represents the fastest, easiest, most accurate way to implement discrete circuits for power factor correction and phase-shifted full bridge designs. Specifically this free online tool: •Provides Power Factor Correction (PFC) and/or Phase-Shifted Full Bridge (PFSB) with Synchronous Rectification (SR) power train selection and analysis,in separate modules •Is optimized for use with UCC28950 and UCC3895 controllers where PFSB + SR is required •Delivers approximately 2 percent difference to line and load conditions verified to real-world test results •Eliminates the need to solder, de-solder, measure and document several device combinations on the bench •Takes user input to automatically trigger an optimum set of power discrete, transformer and inductor design values •Displays a dashboard of the converter’s system and device power loss, device junction temperature and further fine tuning over operating conditions •Supports the ability to optimize final performance by selecting Fairchild’s leading MOSFET and IGBT technologies, including SuperFET®, SuperFET® II, SupreMOS®, PowerTrench® and Field Stop IGBT •Automatically generates a BOM which can be used for instant procurement; allows users to confidentially save results for future reference or sharing www.fairchildsemi.com/support/design-tools/ Additional Power Supply WebDesigner tools are available for Flyback and LED designs. Visit our new Design Tools page and get started now. 1234- POWER FACTOR CORRECTION STEP 1 Enter Design Requirements STEP 2 Auto Design with Manual Optimization; Loss and Efficiency Analysis Display STEP 3 View Design Report, Bill of Materials, Link to Distributors Log in or register for MyFairchild @ www.fairchildsemi.com Select Design Tools Choose PFC or PSFB+SR module Input requirements—see your power train design in seconds! PHASE-SHIFTED FULL BRIDGE + SYNCHRONOUS RECTIFICATION Trademarks, service marks, and registered trademarks are the property of Fairchild Semiconductor or their respective owners. For a listing of Fairchild Semiconductor trademarks and related information, please see: www.fairchildsemi.com/legal Lit. No. 100063-001 © 2013 Fairchild Semiconductor. All Rights Reserved.