Download With Infobright version 4.8, the reporting database

GMS/Analyzer 8.2 – FAQ on Reporting
Database Version 1 – 2:00 PM Jan 10, 2017
Contents
What is Reporting Database Version 2? ....................................................................................................... 2
How does this look in MySonicWALL Download Center? ............................................................................. 2
What will happen to existing deployments as of GMS 8.0 and below? ....................................................... 3
Which file should I use to upgrade my GMS 8.0? ......................................................................................... 3
How do I know which version of the Reporting Database the customer is running? .................................. 4
Will the reporting data collected under previous versions migrated to Reporting Data Version 2? ........... 5
Are there any dependencies for GMS 8.1 upgrades? ................................................................................... 5
What happens if any of the dependencies are missed? ............................................................................... 5
What is the Upgrade path to 8.1 Rv2? .......................................................................................................... 5
How to upgrade to 8.1 Rv2? ......................................................................................................................... 6
How do I know the status of the Reporting Data Migration from 8.0 to 8.1 Rv2? ..................................... 11
What will happen if there is not enough space to run the data migration? .............................................. 12
Can I continue with Reporting Database Version 1? .................................................................................. 12
What is Reporting Database Version 2?
With Infobright version 4.8, the reporting database vendor has replaced the storage engine MySQL with
Postgres. This is integrated into GMS 8.1 and above, available to all new customers or deployments as of
Dec 23, 2015 and will have access to only GMS 8.1 release.
How does this look in MySonicWALL Download Center?

I.
II.
III.

Virtual Appliance
SW 8.2 GMS/Analyzer Rv2 VA 950GB|250GB|40GB – The Rv2 in the name of the link indicates it
is Reporting Database Version 2. This binary is used for new installations of GMS 8.2
SW 8.2 GMS/Analyzer Rv2 VA Upgrade – The keyword Upgrade in the name of the link indicates
upgrade. This binary is used for upgrading existing deployments of GMS 8.1 to GMS 8.2
Reporting Database Version 2 or GMS 8.1 Reporting Database Version 2 that were already
migrated under 8.1
SW 8.2 GMS/Analyzer VA Upgrade – Since there is NO mention of reporting database version,
this binary is the original reporting database introduced with GMS 7.0. This binary is used for
upgrading existing deployments of GMS 8.2 and continue with Reporting Database Version 1
Windows


The naming convention is the same for Windows binaries as well – Rv2 for Reporting Database
Version 2
The same binary is used for both Upgrade and Fresh installation as well and the installer will
present you with the various options as follows:
o Continue to use Reporting Database Version 1
o Upgrade to Reporting Database Version 2 and migrated the data
Note: The Windows version of Original Reporting database allows for fresh installation of GMS/Analyzer.
However, we do track the registrations on the backend for any violations of new installations of
GMS/Analyzer running Reporting Database Version after Jan 1, 2016 will be contacted by customer for
Licensing violations.
What will happen to existing deployments as of GMS 8.1 and below?
Existing GMS 8.1 will have 2 options available to them.
Option 1: Already Upgraded to Reporting Database Version 2 while moving from 8.0 to 8.1, the upgrade
process is standard.
Option 2: Upgrade from GMS 8.1 with Reporting Database Version 1 will have the following options:
o
o
Continue to use Reporting Database Version 1
Upgrade to Reporting Database Version 2 and migrated the data
Which file should I use to upgrade my GMS 8.1?
You should first make a decision on whether to continue with Reporting Database Version 1 or upgrade
to Reporting Database Version 2 introduced with GMS 8.1 release.
1. Option 1: Continue with Reporting Database Version 1
For Virtual Appliance:
SW 8.1 GMS/Analyzer VA Upgrade
For Windows:
SW 8.1 GMS/Analyzer Windows
2. Option 2: Upgrade to Reporting Database Version 2 (Rv2)
For Virtual Appliance:
SW 8.1 GMS/Analyzer Rv2 VA Upgrade
For Windows system:
SW 8.1 GMS/Analyzer Rv2 Windows
How do I know which version of the Reporting Database the customer is
running?
Multiple locations:
1. UMH->Deployment->Services
Reporting Database II for – Rv2
Reporting Database
2. Application->Console->Help->About
Reporting Database Version 2
Report Database Version: PostgreSQL 9.2.2 (IB_33928), shared on x86_64-unknown-linux-gnu,
compiled by gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44), 64-bit
Reporting Database – NO Reference at all
Will the reporting data under previous versions migrated to Reporting
Data Version 2?
Yes. By DEFAULT, the data is migrated automatically after upgrade. However, the user has options to
control the amount of data to be migrated and disk space requirement. This is clearly explained in the
following 4 locations:
1. 8.2 Software Download: Alert is displayed outlining the Dependencies, Data Migration
Dependencies for Upgrades from 8.1
2. 8.2 Release Notes
3. 8.1 Software Download: Alert is displayed outlining the Dependencies, Data Migration
Dependencies for Upgrades from 8.0
4. 8.1 Release Notes
5. 8.0 SP1 Release Notes has instruction on the 8.1 upgrade in “Pre 8.1 Upgrade Preparation”
6. 8.0 Hotfix #167675 Release Notes has instruction on the 8.1 upgrade in “Pre 8.1 Upgrade
Preparation”
Are there any dependencies for GMS 8.2 upgrades?
Yes.
1. 8.1 Hot Fix 168044 – Please Reboot the systems after installing this Hot Fix
2. 8.1 Report data migration from RV1 to RV2 should have been completed. The status of the
migration can be verified by logging into Reporting UI
What happens if any of the dependencies are missed?
There is NO loss to any data. You will have to call Technical Support to recover.
What is the Upgrade path to 8.2 Rv2?
Preferred order of upgrade
1. 8.1Rv2->8.1 Hot Fix 168044->8.2 Rv2
2. 8.0 -> 8.0.1 -> 8.0 Super Hot fix 167675-> 8.1 Rv2 (Wait for Data Migration to complete – Log
into Reports UI to check the status)->8.1 Hot Fix 168044 (Reboot System)->8.2 Rv2
3. 8.0 -> 8.0.1 -> 8.1 Rv2(Wait for Data Migration to complete – Log into Reports UI to check the
status)->8.1 Hot Fix 168044(Reboot System)->8.2 Rv2
4. 8.0 -> 8.1 Rv2(Wait for Data Migration to complete – Log into Reports UI to check the status)>8.1 Hot Fix 168044(Reboot System)->8.2 Rv2
How to upgrade to 8.1 Rv2?
Upgrade to 8.1 Rv2 is a 2 step process.
1. Getting prepared for Report Database migration to Rv2
2. Applying upgrade to 8.1 Rv2
Phase 1: Getting prepared for Reporting Database migration to RV2
To complete this phase, Make sure that you have already installed the 8.0 SP1 & the HF 167675 before
proceeding. Follow below steps to complete this phase 1
Step 1: Log into the Dell SonicWALL Universal Management Host (UMH) System Management Interface
Note: The Dell SonicWALL Universal Management Host (UMH) System Management Interface
user/password maybe different from Dell SonicWALL GMS Management Interface user/password.
To access the UMH system management interface on the default HTTP port using a browser on the host
server, use the URL below. Where (x.x.x.x) is the GMS / Analyzer server IP:
http://localhost/appliance/ or http://x.x.x.x/appliance/
Upon logging in, you will be on the System Management page
This is for system management of the host server, including registration and licensing, setting the admin
password, selecting the deployment role, and configuring other system settings.
Step 2: Access the GMS Tech Support page
To access the Tech Support page Change URL as below. The Tech Support URL takes you to the Tech
Support warning page.
http://x.x.x.x/appliance/techSupport.html
Click the Accept button to access the Technical Support page and Scroll down to "Reporting Data
Migration from MySQL to Postgres Database engine" section.
Step 3: Data Migration options
There are three data migration options available to choose from.
Option 1:
Migrate the Data – (this is the default option)



The drop down box for "Do you want to migrate the data for the following months:"- auto set to
Yes
No need to select data, all data will be migrated
Click on Migrate
Option 2:
Migrate the Data but choose the number of months to migrate



The drop down box for "Do you want to migrate the data for the following months:"- set to Yes
Select the check boxes for the months to migrate
Click on Migrate
Option 3:
Do not migrate the data


The drop down box for "Do you want to migrate the data for the following months:"- set to No.
Note: This will not migrate the existing data to new database but the New data will load into the
new Reporting database (RV2)
Click on Migrate
Note: Clicking on ‘Migrate’ button will not start the data migration but will set the configuration option
in the GMS to process the data accordingly (per options above) when applying upgrade to 8.1
By choosing one of the above options, GMS / Analyzer system is now configured and ready to upgrade
to 8.1 RV2.
Phase 2: Upgrading to 8.1 RV2 (data migration)
After setting the data migration options above in phase 1, now Continue on to steps below to upgrade
to 8.1 RV2.
Note: During following steps the actual data migration will take place and is subjected to the settings
you choose earlier for migration. The process of data migration may take longer and you may not be
able to view any of the reporting data until the migration process is completed.
Step 4: Login to the Mysonicwall account and download and save the corresponding file from the link
‘SW 8.1 GMS/Analyzer Rv2 VA Upgrade’
Step 5: Login to UMH (/appliance) page using http://localhost/appliance/
Now click on Home
button to go back to the UMH (/appliance) page. If you already logged out then
log back into the Dell SonicWALL Universal Management Host (UMH) System Management Interface and
go to System > Settings page
Step 6: Applying 8.1 upgrade file
Click on the browse button and select the file ‘gmsvp-updater-patch-8.1.8109.1184-release-IB-pg.sh’
and click on ‘Apply’
Once the patch is applied the system will reboot and
Step 6: After the system reboot, login to the main interface.
http://localhost/sgms or http://x.x.x.x/sgms (x.x.x.x is IP of GMS / Analyzer system)
How do I know the status of the Reporting Data Migration from 8.0 to
8.1 Rv2?
After the upgrade is done, login to the GMS > Firewall > Reports panel and if you see screen as below
then data migration is still running. To get more details check the advance steps listed below.
The message in the above screen not necessarily mean issue with the ‘Reports Database’ service as the
message could be due to data migration. Also the ‘Reports Database’ service on agent will not be
running until the migration process is completed.
Note: Please check the migration logs first before restarting the service/s.
Advanced Steps: Check the following logs for the status on the data migration and lookout for below log
entries.
IB-EMI-008e9 N 2015-11-30.13:37:36
table public.raw_201511"
GMSDev-IEE-PGSQL
0.0
sfm:12940
uf:0
et:0.00
nrq:0
cpu:0.0
execlog:"Creating
IB-EMI-008dc
GMSDev-IEE-PGSQL 0.0
sfm:12940
uf:0
et:0.00
nrq:0
cpu:0.0
execlog:"Success!"
Windows:
N
2015-11-30.13:37:46
Virtual Appliance:
/var/lib/Infobright_pg/ib_data/ibmigator.log
Windows:
<install drive>\GMSVP\infobright_pg\ib_data\ibmigrator.log
In case of distributed deployment, you may be able to see such screen as below which points out that
migration / upgrade is not yet completed on one of the GMS system. In that case, please check and
verify the logs on the agent/s.
What will happen if there is not enough space to run the data
migration?
Migration will stop if the system does not have enough disk space. StdAppliance log file will show
the error message (existing code)
Can I continue with Reporting Database Version 1?
Yes.
Existing customers who have GMS deployments UP and Running as of Dec 31, 2015 can choose to
continue with Reporting Database Version 1. They also can add new agents to the existing deployments
and also re-install the deployment. The key timeline is the Date of Registration of GMS 8.0 and below.