Download JAYLUM Wall Micro Prismatic/ Frosted Lens

DESCRIPTION
Type
With maximized performance in a uniquely minimal profile, the new JAYLUM Series
Catalog #
features crisp modern lines with and high efficient lens material to meet the most
stringent energy needs. The JAYLUM Series may be mounted individually or continuProject
ously with 4’ and 8’ modular sections and is suited for open offices, private offices,
conference rooms, reception areas, corridors, and restrooms. The JAYLUM wall can be
mounted over standard 2x4 inch J-Boxes for individual or continuous configurations Comments
using 4 and 8 foot modular sections while maintaining ADA compliance.
Date
Prepared by
SPECIFICATION FEATURES
D ... End Plates
A ... Construction
Standard endcaps are rounded die
cast aluminum and mechanically attached flush to end of fixture without
exposed fasteners.
Low profile housing and integral gear
tray constructed from die-formed 20
gauge cold rolled steel forming a 4” x
1-1/2” ADA profile.
B ... Finish
E ... Reflectors
Fixture housings are high
reflectance white using
electrostatically applied polyester
powder coat paint.
C Series
... Lens
Optics Down
Lens
high light transmission
M = Micro 0.118”
JW =isJAYLUM
Prismatic acrylic
Lens
Wall microlinear prismatic
thick clear
L = Frosted
Lens
or a high light transmission
0.08”
thick
frosted
acrylic
material.
Optics Up
Light Level
W = White
Reflector pan is painted with a high
reflectance white powder coat finish.
Optional die-formed side reflectors are
highly
specular anodized aluminum.
Color Temperature
Wiring
B = Battery 3
30 = LED 3000K
35 = LED 3500K
40 = LED 4000K
1L = Light Level 1 (30W)1
2L = Light Level 2 (39W)1
3L = Light Level 3 (50W)1
AB C
D
C = Standard
D = Dimming
E = Emergency
E
F
Number of Circuits
1 = 1 Circuit 2
Fluorescent: T5/T5HO fixtures use UL listed
Class P, program rapid start universal voltage electronic ballasts with a power factor
greater than 0.95 and a less than 10%
THD. T8 fixture use Class P, T8 instant start
universal voltage electronic ballasts with
a power factor greater than 0.98 and a
less than 10% THD. Fixtures and electrical
components are certified to UL and CUL
standards.
Mounting
SU-WA = Wall Mount
G ... Mounting
Fixture mounts directly to structure
over a 2Fixture
x 4 inch
Runstandard
Length electrical box
mounted
into the wall.
4 = horizontally
4ft
8 = 8ftto installation instructions
Please refer
XX = Specify Length 5
for details.
Finish
Blank = White
S = Silver
CC = Custom Color
JAYLUM Wall
Micro Prismatic/
5LT = Fifthlight Driver
LUT = Lutron Driver 6
Frosted Lens
Blank = Standard 0-10V Driver
Driver Options
Voltage
T8, T5, and T5HO
120 = 120V
277 = 277V
Wall Mounted
2.75” [70mm]
UNV = Universal
(120V-277V) 4
1.55” [38mm]
Notes:
T = Nightlight
G
Y = Daylight
F ... Electrical
1. Lumen values vary depending on color temperature and lens option.
Refer to photometric data for specific lumen values.
2. Maximum one driver per 4’ fixture.
Direct/ Indirect
3. Remote only for LED.
4. This option accommodates 120/220/240/277V at 50/60Hz.
5. Continuously mounted standard row configurations over 8’ consist of 4’ and 8’ sections.
6. Lutron Driver not available in Light Level 3.
3.92” [100mm]
Modules and Dimensions*
48” [1219mm]
96” [2438mm]
*Dimensions do not include end caps
ORDERING INFORMATION
Sample Number: JW-WL-1T5-1D-277-SU-WA-4-5LTV-DC
Series
JW = JAYLUM
Wall
Optics Down
Lamp Type
Wiring
Mounting
Top Cover Options
M = Micro
Prismatic Lens
N5 = T5 Normal Output
T5 = T5 High Output
T8 = T8 Normal Output
B = Battery 2
SU-WA = Wall Mount
DC = Dust Cover 6
C = Standard
D = Dimming
E = Emergency
Fixture Run Length
L = Frosted Lens
Optics Up
Number of Lamps
W = White
S = Specular
1 = 1 Lamp
Number of Circuits
1 = 1 Circuit 1
T = Nightlight
Y = Daylight
Blank = None
4 = 4ft
8 = 8ft
XX = Specify Length 4
Voltage
120 = 120V
277 = 277V
Notes:
1. Maximum one ballast per 4’ fixture.
UNV = Universal
(120V-277V) 3
2. Consult factory for available battery options.
347 = 347V
3. This option accommodates 120/220/240/277V at 50/60Hz.
4. Continuously mounted standard row configurations over 8’ consist of 4’ and 8’ sections.
Finish
Blank = White
S = Silver
CC = Custom Color
Ballast Options 7
5LT = Fifthlight DALI Ballast
GFLO30 = Green Fluorescent
5
Option - 3000K Lamps
GFLO35 = Green Fluorescent
Option - 3500K Lamps 5
GFLO41 = Green Fluorescent
Option - 4100K Lamps 5
5LTV = 0-10V Program Rapid Start Ballast
5LTVS = 0-10V Spec Grade
Program Rapid Start Ballast 8
24VDC = 24V DC Ballast
Blank = Standard Ballast
5. Option not available in T5 or T5HO lamping.
6. Option not available in T8 lamping.
7. Consult factory for other available ballast options.
8. Ideal for True parallel-lamp dimming and/or use with low mercury and energy saving lamps.
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Consult your representative for additional options and finishes.
ADE130897
07/11/2013