Download Secondary Machining Techniques

Macmillan Academy
BTEC First Engineering
Assessment 1 Activity Front Sheet
This front sheet must be completed by the student where appropriate and included with the work
submitted for assessment.
Students Name
Date Issued
Assessors Name
Completion Date
Mr A Badger
Submitted on
Qualification
Unit 14
Selecting and Using Secondary Machining Techniques to Remove Material
Secondary Machining Techniques
In this assessment you will have opportunities to provide evidence against the following criteria.
Indicate the page numbers where the evidence can be found.
Criteria
reference
P1
To achieve the criteria the evidence must show that
the student is able to:
Describe how three different secondary machining
techniques are used.
P2
Describe the appropriate use of three different workholding devices for these different techniques.
P3
Describe the appropriate use of three different tools
for these different techniques.
Internal Verifiers approval to use with students
IV’s Name
IV’s Signature
Tick if
met
Page numbers
Date
Assessment Feedback Form
Assessment Feedback Report
Unit Title: Selecting and Using Secondary Machining Techniques to Remove Material
Assignment Title: Secondary Machining Techniques
Student’s Name:
Assessment Criteria
Achieved
P1
Describe how three different
secondary machining
techniques are used.
Yes/No
P2
Describe the appropriate use
of three different workholding devices for these
different techniques.
Yes/No
P3
Describe the appropriate use
of three different tools for
these different techniques.
Yes/No
Evidence
Comments/feedback
Yes/No
Yes/No
Assessor’s Signature:
Date
Assessor’s General Comments:
Internal Verifier’s Comments on Assessment
Name
Signature
Date
Student’s Comments:
Student’s Signature:
Date
Macmillan Academy
BTEC First Engineering
Assessment 1 - Secondary Machining Techniques
Scenario
You are the engineering apprentice for a large industrial company. As part of your
training you must undergo appreciation courses in the other trades. The following
tasks form part of a mechanical fitter’s job description.
Tasks
1 You need to write a report for each of the named processes below. The reports must
also include diagrams to aid in the description of how the process works, and what are
the advantages and limitations of each process.
TURNING - centre lathe, capstan eg turret, automatic
MILLING - up-cut, down cut eg horizontal, vertical, universal
DRILLING – Pillar and Bench drill
This will cover the marking criteria P1.
2 You need to draw and describe the different holding devices used on the 3 machines
named in P1, this will include, the 3 and 4 jaw chuck (97) used on the lathe, the heavy
machine vice (83) used on the milling machine and the hand vice (83) used with the
pillar drill.
This will cover the marking criteria P2.
3 You will need to draw and describe the different cutting tools used on the 3
machines named in P1. This includes the lathe cutting tools (98), the cutters (103)
used for horizontal/vertical milling and the twist drill bits(90) used on the pillar drill.
This will cover the marking criteria P3.